Three-phase inverter parallel-connection control method without output isolation transformer

The invention discloses a three-phase inverter parallel-connection control method without an output isolation transformer. The method comprises the following steps: an output end of each three-phase inverter is connected with an LCL filter, and a filtering capacitor of each LCL filter is connected with a dumping resistor in series, so that the stability is improved, the harmonic wave of a harmonic point is limited, and stability range of control parameters is increased. By means of pre-synchronization before parallel connection and carrier synchronization in the process of parallel connection operation, the phases among the three-phase inverters and parallel-connected communication buses are synchronized, carriers among the three-phase inverters connected in parallel are synchronized, and stability of parallel connection is guaranteed. By means of the algorithms combining pole assignment capacitor voltage control and virtual resistance matching control, the response speed of the inverters is improved, the control performance is improved, and the influence on parallel-connection current sharing by circuit resistance is lowered. By means of seamless mode switching and alternative current over-current and short-circuit failure protection base on three-ring control, under the condition of absence of the output isolation transformer, the three-phase inverter parallel-connection control method is used for independently resolving short-circuit failures of a parallel-connection micro power grid.