A cost optimization model for 100% renewable residential energy supply systems

Throughout the last years the use of on-site renewable energy sources (RES) in residential houses has continuously increased in many industrial countries and it is expected that many of the supply systems will be based solely on renewable sources in the medium term future. However, the explicitly higher installation costs compared to conventional systems and the variability of the energy sources require an optimized design of the overall system. To achieve this, a new approach is needed which accounts for the interdependencies between the different supply technologies as well as consumption profiles of residents and on-site energy resource availability. This paper aims at developing a model based on linear programming for the optimal sizing of 100% renewable supply systems in terms of the overall system costs. It has been successfully applied in a case study for a so called Net Zero Energy Building in Denmark with three technology options. It is shown that under the chosen conditions the optimal configuration is given by a PV model combined with a heat pump for heat supply. The model allows for a fast evaluation of different supply options and is intended to be extended in future to all kind of residential RES technologies.

[1]  Masa Noguchi,et al.  Net Zero Energy Homes of the Future: A Case Study of the ÉcoTerraTM House in Canada , 2008 .

[2]  Ralf Klein,et al.  A Belgian pilot project for zero energy office buildings , 2010 .

[3]  Andreas Witzig,et al.  Surrogate modeling for the fast optimization of energy systems , 2013 .

[4]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[5]  Himangshu Ranjan Ghosh,et al.  Prospect of wind–PV-battery hybrid power system as an alternative to grid extension in Bangladesh , 2010 .

[6]  Masa Noguchi,et al.  Net Zero Energy Homes of the Future: A Case Study of the ÉcoTerra , 2008 .

[7]  M. P. Dorado,et al.  Life Cycle Assessment and External Environmental Cost Analysis of Heat Pumps , 2004 .

[8]  Andreas Wiese,et al.  Renewable Energy: technology, economics and environment , 2008 .

[9]  Per Heiselberg,et al.  A Literature Review of Zero Energy Buildings (ZEB) Definitions , 2009 .

[10]  David Kendrick,et al.  GAMS, a user's guide , 1988, SGNM.

[11]  B. Mathiesen,et al.  100% Renewable energy systems, climate mitigation and economic growth , 2011 .

[12]  Per Heiselberg,et al.  Life cycle cost analysis of a multi-storey residential Net Zero Energy Building in Denmark , 2011 .

[13]  Enrico Fabrizio,et al.  A model to design and optimize multi-energy systems in buildings at the design concept stage , 2010 .

[14]  Karsten Voss,et al.  Net Zero Energy Buildings: International Projects of Carbon Neutrality in Buildings , 2013 .

[15]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[16]  Eike Musall,et al.  Zero Energy Building A review of definitions and calculation methodologies , 2011 .

[17]  Ryozo Ooka,et al.  Optimal design method for building energy systems using genetic algorithms , 2009 .

[18]  Thomas Bennett,et al.  Solar Thermal Water Heating: A Simplified Modelling Approach and Potential Application for CHBE , 2007 .

[19]  Weimin Wang,et al.  Applying multi-objective genetic algorithms in green building design optimization , 2005 .

[20]  Dag Henning.  MODEST : an energy-system optimisation model applicable to local utilities and countries , 1997 .

[21]  L. Aelenei,et al.  The Road Towards “Zero Energy” in Buildings: Lessons Learned from SOLARXXI Building in Portugal , 2010 .

[22]  I. Beausoleil-Morrison,et al.  TOOLS FOR THE DESIGN OF ZERO ENERGY SOLAR HOMES , 2005 .

[23]  Igor Bulatov,et al.  Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors , 2008 .

[24]  Brian Vad Mathiesen,et al.  A review of computer tools for analysing the integration of renewable energy into various energy systems , 2010 .

[25]  Petr Stehlík,et al.  Integrating renewable sources of energy into an existing combined heat and power system , 2006 .

[26]  Enrico Fabrizio,et al.  An hourly modelling framework for the assessment of energy sources exploitation and energy converters selection and sizing in buildings , 2009 .

[27]  Li Zhu,et al.  Comprehensive energy and economic analyses on a zero energy house versus a conventional house , 2009 .

[28]  Petar Sabev Varbanov,et al.  Total Sites Integrating Renewables With Extended Heat Transfer and Recovery , 2010 .

[29]  Seppo Junnila,et al.  Combining life cycle costing and life cycle assessment for an analysis of a new residential district energy system design , 2013 .

[30]  Karsten Voss,et al.  Net zero energy buildings: A consistent definition framework , 2012 .

[31]  Phillip John Jones,et al.  Case study of zero energy house design in UK , 2009 .

[32]  Elias B. Kosmatopoulos,et al.  A roadmap towards intelligent net zero- and positive-energy buildings , 2011 .

[33]  Brian Vad Mathiesen,et al.  The role of district heating in future renewable energy systems , 2010 .

[34]  Andreas K. Athienitis,et al.  Design and optimization of net zero energy solar homes , 2006 .

[35]  Enzo Sauma,et al.  Business optimal design of a grid-connected hybrid PV (photovoltaic)-wind energy system without energy storage for an Easter Island's block , 2013 .

[36]  Peter Lund,et al.  Multivariate optimization of design trade-offs for solar low energy buildings , 1999 .

[37]  Valerio Lo Brano,et al.  Life cycle assessment of a solar thermal collector: sensitivity analysis, energy and environmental balances , 2005 .

[38]  P. Torcellini,et al.  Criteria for Definition of Net Zero Energy Buildings , 2010 .

[39]  Per Heiselberg,et al.  Zero energy buildings and mismatch compensation factors , 2011 .