A knee-mounted biomechanical energy harvester with enhanced efficiency and safety

Energy harvesting is becoming a major limiting issue for many portable devices. When undertaking any activity, the human body generates a significant amount of biomechanical energy, which can be collected by means of a portable energy harvester. This energy provides a method of powering portable devices such as prosthetic limbs. In this paper, a knee-mounted energy harvester with enhanced efficiency and safety is proposed and developed to convert mechanical energy into electricity during human motion. This device can change the bi-directional knee input into uni-directional rotation for an electromagnetic generator using a specially designed transmission system. Without the constraint of induced impact on the human body, this device can harvest biomechanical energy from both knee flexion and extension, improving the harvesting efficiency over previous single-direction energy harvesters. It can also provide protection from device malfunction, and increase the safety of current biomechanical energy harvesters. A highly compact and light prototype is developed taking into account human kinematics. The biomechanical energy harvesting system is also modeled and analyzed. The prototype is tested under different conditions including walking, running and climbing stairs, to evaluate the energy harvesting performance and effect on the human gait. The experimental results show that the prototype can harvest an average power of 3.6 W at 1.5 m s−1 walking speed, which is promising for portable electronic devices.

[1]  P. Chapman,et al.  Evaluation of motions and actuation methods for biomechanical energy harvesting , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[2]  Taeseung D. Yoo,et al.  Generating Electricity While Walking with Loads , 2005, Science.

[3]  Meiling Zhu,et al.  The pizzicato knee-joint energy harvester: characterization with biomechanical data and the effect of backpack load , 2012 .

[4]  P R Cavanagh,et al.  Three-dimensional kinematics of the human knee during walking. , 1992, Journal of biomechanics.

[5]  J. Tarascon,et al.  Towards greener and more sustainable batteries for electrical energy storage. , 2015, Nature chemistry.

[6]  J A Hoffer,et al.  Biomechanical Energy Harvesting: Generating Electricity During Walking with Minimal User Effort , 2008, Science.

[7]  Wei-Hsin Liao,et al.  A regenerative damper with MR fluids working between gear transmissions , 2013, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  Aaron M. Dollar,et al.  Biomechanical considerations in the design of lower limb exoskeletons , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[9]  D. Winter,et al.  Biomechanical walking pattern changes in the fit and healthy elderly. , 1990, Physical therapy.

[10]  William H Gage,et al.  Kinematic and kinetic validity of the inverted pendulum model in quiet standing. , 2004, Gait & posture.

[11]  Chao Chen,et al.  Design considerations in medium-power biomechanical energy harvesting circuits , 2014, 2014 IEEE International Conference on Information and Automation (ICIA).

[12]  John D. Mai,et al.  A wind-flutter energy converter for powering wireless sensors , 2012 .

[13]  Yiannos Manoli,et al.  Human motion energy harvesting: numerical analysis of electromagnetic swing-excited structures , 2016 .

[14]  Joseph A. Paradiso,et al.  Energy Scavenging with Shoe-Mounted Piezoelectrics , 2001, IEEE Micro.

[15]  P. Chapman,et al.  Design and optimization of a biomechanical energy harvesting device , 2008, 2008 IEEE Power Electronics Specialists Conference.

[16]  Yiannos Manoli,et al.  Energy harvesting from human motion: exploiting swing and shock excitations , 2015 .

[17]  L. Zuo,et al.  Energy-harvesting shock absorber with a mechanical motion rectifier , 2013 .

[18]  Wei-Hsin Liao,et al.  Regenerative magnetorheological dampers for vehicle suspensions , 2015, Smart Structures.

[19]  Michele Pozzi,et al.  Magnetic plucking of piezoelectric bimorphs for a wearable energy harvester , 2016 .

[20]  Raziel Riemer,et al.  Biomechanical energy harvesting from human motion: theory, state of the art, design guidelines, and future directions , 2011, Journal of NeuroEngineering and Rehabilitation.

[21]  Gregory D. Abowd,et al.  Design and Performance of an Optimal Inertial Power Harvester for Human-Powered Devices , 2011, IEEE Transactions on Mobile Computing.

[22]  Qingguo Li,et al.  Journal of Neuroengineering and Rehabilitation Development of a Biomechanical Energy Harvester , 2022 .

[23]  W. Liao,et al.  A self-sensing magnetorheological damper with power generation , 2012 .