Analysis of effects of the state of charge on the formation and growth of the deposit layer on graphite electrode of pouch type lithium ion polymer batteries

Abstract The breakdown of the protective solid electrolyte interface (SEI) layer formed on lithium ion battery anodes can initiate further electrolyte decomposition and the formation of non-uniform and electronically insulating reaction products on the surface of the graphite particles. The results from this study indicate that raising both the lower and upper ends of the state of charge (SOC) increased the rate of the electrolyte decomposition side reaction to form a thick deposit surface film. This deposit layer contained lithium that can no longer participate in the reversible electrochemical reaction. In addition, the high cycling potential coupled with high charge rate created a large lithium concentration gradient that led to some particles detachment from the current collector and isolation in the electrochemical process.

[1]  S. Pyun,et al.  In-situ spectroelectrochemical analysis of the passivating surface film formed on a graphite electrode during the electrochemical reduction of lithium salts and organic carbonate solvent , 1998 .

[2]  H. Fujimoto,et al.  Reduction of the irreversible capacity of a graphite anode by the CVD process , 2001 .

[3]  Jiang Fan,et al.  Studies on Charging Lithium-Ion Cells at Low Temperatures , 2006 .

[4]  Y. Okamoto Ab Initio Calculations of Thermal Decomposition Mechanism of LiPF6-Based Electrolytes for Lithium-Ion Batteries , 2013 .

[5]  Petr Novák,et al.  Key factors for the cycling stability of graphite intercalation electrodes for lithium-ion batteries , 1999 .

[6]  Jean-Marie Tarascon,et al.  Live Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells , 2002 .

[7]  Bok Ki Kim,et al.  Electrochemical Behavior of Li-Powder Anode in High Li Capacity Used , 2012 .

[8]  Ji‐Guang Zhang,et al.  Optimized Operating Range for Large-Format LiFePO4/Graphite Batteries , 2014 .

[9]  Hannah M. Dahn,et al.  The Rate of Active Lithium Loss from a Soft Carbon Negative Electrode as a Function of Temperature, Time and Electrode Potential , 2012 .

[10]  Pedro L. Moss,et al.  Study of Capacity Fade of Lithium-Ion Polymer Rechargeable Batteries with Continuous Cycling , 2010 .

[11]  Hongsup Lim,et al.  Factors that affect cycle-life and possible degradation mechanisms of a Li-ion cell based on LiCoO2 , 2002 .

[12]  P. Biensan,et al.  Surface film formation on electrodes in a LiCoO2/graphite cell: A step by step XPS study , 2007 .

[13]  S. Pyun,et al.  The effect of electrolyte temperature on the passivity of solid electrolyte interphase formed on a graphite electrode , 2002 .

[14]  D. Aurbach,et al.  Electrochemical behavior of graphite anode at elevated temperatures in organic carbonate solutions , 2003 .

[15]  P. Novák,et al.  SNIFTIRS investigation of the oxidative decomposition of organic-carbonate-based electrolytes for lithium-ion cells , 2000 .

[16]  Chenghuan Huang,et al.  Electrode/Electrolyte Interfacial Behaviors of LiCoO2/Mixed Graphite Li-Ion Cells during Operation and Storage , 2013 .

[17]  R. Bouchet,et al.  An EIS Study of the Anode Li/PEO-LiTFSI of a Li Polymer Battery , 2003 .

[18]  Petr Novák,et al.  Morphology of the Solid Electrolyte Interphase on Graphite in Dependency on the Formation Current , 2011 .

[19]  Hailong Chen,et al.  In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries. , 2010, Nature materials.

[20]  John T. Vaughey,et al.  Overcharge Effect on Morphology and Structure of Carbon Electrodes for Lithium-Ion Batteries , 2012 .

[21]  D. Aurbach,et al.  A Study of Lithium Deposition‐Dissolution Processes in a Few Selected Electrolyte Solutions by Electrochemical Quartz Crystal Microbalance , 1998 .

[22]  Gan Ning,et al.  Capacity fade study of lithium-ion batteries cycled at high discharge rates , 2003 .

[23]  Yong Yang,et al.  Improved electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material by fluorine incorporation , 2013 .

[24]  K. M. Abraham,et al.  Additives for Stabilizing LiPF6-Based Electrolytes Against Thermal Decomposition , 2005 .