Development of high-sensitivity slip sensor using special characteristics of pressure conductive rubber

Even with the eyes closed, humans are able to grip an object with minimal force without such information as the coefficient of friction or the weight. Tactile sensors capable of detecting slippage are necessary for this gripping action to be realized in a robot hand. Heretofore, many slip sensors were developed and produced, but there was not a slip sensor of simple structure practical for installation on fingertips of a robot hand. Therefore, we propose a low-profile/lightweight slip sensor of simple structure. The special properties of pressure conductive rubber are utilized as a detection device in this sensor. In this paper, we discuss the results of trial manufacture and of slip detection property testing of this sensor. Moreover, we will report the results of slip prevention experiments by this prototype slip sensor, and indicate that the pressure conductive rubber is promising as a material of slip sensor.

[1]  Xianhong Xu,et al.  Sliding Sensor and Soft Grasping of Electron Hydraulic Servo Manipulator , 2006, 2006 International Conference on Mechatronics and Automation.

[2]  Masatoshi Ishikawa,et al.  Development of high speed and high sensitivity slip sensor , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Takayuki Koizumi,et al.  Development and structure evaluation of small sensor element for distributed-type tri-axial force sensor of robot finger , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[4]  Takashi Maeno,et al.  Control of grasping force by detecting stick/slip distribution at the curved surface of an elastic finger , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[5]  Tsukasa Ogasawara,et al.  Grip force control for an elastic finger using vision-based incipient slip feedback , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[6]  R. Johansson,et al.  Signals in tactile afferents from the fingers eliciting adaptive motor responses during precision grip , 2004, Experimental Brain Research.

[7]  R. S. Johansson,et al.  Roles of glabrous skin receptors and sensorimotor memory in automatic control of precision grip when lifting rougher or more slippery objects , 2004, Experimental Brain Research.

[8]  Katsuhiko Nakamura,et al.  Instantaneous evaluation of friction based on ARTC tactile sensor , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[9]  Robert D. Howe,et al.  A tactile sensor for localizing transient events in manipulation , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[10]  Takashi Maeno,et al.  Grasping Force Control in Master-Slave System with Partial Slip Sensor , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  N. Yamazaki,et al.  Relationship between structure of finger tissue and location of tactile receptors , 1997 .

[12]  H. Okano,et al.  Grasping Force Control in consideration of Translational and Rotational Slippage by a Flexible Sensor , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[13]  Paolo Dario,et al.  A thermal slip sensor for biorobotic applications , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[14]  Mark R. Cutkosky,et al.  Estimating friction using incipient slip sensing during a manipulation task , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.