The effect of strontium on the microstructure, porosity and tensile properties of A356–10%B4C cast composite

[1]  R. M. Pillai,et al.  Structure and properties of calcium and strontium treated Al–7Si–0.3Mg alloy: A comparison , 2008 .

[2]  H. Lashgari,et al.  The effect of Al–5Ti–1B on the microstructure, hardness and tensile properties of Al2O3 and SiC-containing metal–matrix composites , 2008 .

[3]  S. Shabestari,et al.  Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis , 2007 .

[4]  M. Martínez,et al.  Optimization of processing parameters for the Al + 10% B4C system obtained by mechanical alloying , 2007 .

[5]  T. Qiu,et al.  Oxidation behaviour of boron carbide powder , 2007 .

[6]  Liming Lu,et al.  Effects of combined additions of sr and AlTiB grain refiners in hypoeutectic Al-Si foundry alloys , 2006 .

[7]  K. Nogita,et al.  Determination of strontium segregation in modified hypoeutectic Al–Si alloy by micro X-ray fluorescence analysis , 2006 .

[8]  M. Surappa,et al.  Hot hardness and indentation creep study on Al–5% Mg alloy matrix–B4C particle reinforced composites , 2006 .

[9]  A. K. Dahle,et al.  Eutectic modification and microstructure development in Al–Si Alloys , 2005 .

[10]  K. Nogita,et al.  Combining Sr and Na additions in hypoeutectic Al–Si foundry alloys , 2005 .

[11]  John A. Taylor,et al.  The influence of strontium on porosity formation in Al-Si alloys , 2004 .

[12]  M. Surappa,et al.  Effect of Sr addition on an Al–7Si–10 vol.% SiCp cast composites , 2004 .

[13]  J. Griffiths,et al.  Damage by eutectic particle cracking in aluminum casting alloys A356/357 , 2003 .

[14]  H. Liao,et al.  Mutual poisoning effect between Sr and B in Al–Si casting alloys , 2003 .

[15]  A. Samuel,et al.  Influence of composition, Sr modification, and annealing treatment on the structure and properties of cast Al-4 pct Mg alloys , 2003 .

[16]  P. Uggowitzer,et al.  On the silicon spheroidization in Al-Si alloys , 2002 .

[17]  H. Liao,et al.  Correlation between mechanical properties and amount of dendritic α-Al phase in as-cast near-eutectic Al-11.6% Si alloys modified with strontium , 2002 .

[18]  P. An,et al.  Effect of modification and ceramic particles on solidification behavior of aluminum-matrix composites , 2002 .

[19]  A. Kennedy.  The microstructure and mechanical properties of Al-Si-B4C metal matrix composites , 2002 .

[20]  A. K. Dahle,et al.  Modification of Al–Si alloys with Ba, Ca, Y and Yb , 2001 .

[21]  A. Kennedy,et al.  The reactive wetting and incorporation of B4C particles into molten aluminium , 2001 .

[22]  J. Conley,et al.  Modeling the effects of cooling rate, hydrogen content, grain refiner and modifier on microporosity formation in Al A356 alloys , 2000 .

[23]  M. Surappa,et al.  The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites , 1999 .

[24]  F. Samuel,et al.  Effect of inclusions on the tensile properties of Al–7% Si–0.35% Mg (A356.2) aluminium casting alloy , 1998 .

[25]  R. Asthana,et al.  Solidification processing of reinforced metals , 1998 .

[26]  J. Bouix,et al.  Chemical reactivity of aluminium with boron carbide , 1997 .

[27]  F. Ajersch,et al.  Si phase nucleation on SiC particulate reinforcement in hypereutectic AlSi alloy matrix , 1994 .

[28]  E. Lavernia,et al.  Solidification behavior of AlSi/SiC MMCs, during wedge-mold casting , 1994 .

[29]  J. Gruzleski,et al.  The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation , 1993 .

[30]  J. P. Lucas,et al.  The effect of reinforcement stability on composition redistribution in cast aluminum metal matrix composites , 1991 .