Active pipe-embedded structures in buildings for utilizing low-grade energy sources: A review

Low-grade energy sources such as geothermal energy, favorable ambient air and industrial waste heat etc. exist widely. Sufficient utilization of these low-grade energy sources may reduce our daily dependence on high-grade energy sources such as electricity resulting in reduced emission of green house gas for environmental conservation. Active pipe-embedded structure as floor/ceiling usually with water as the medium to carry heat or coolth may utilize these low-grade energy sources for providing space air-conditioning. Compact arrangement of pipes in the structure may significantly enlarge heat transfer surface between the slab mass and water in the pipe allowing substantial heat flows even for relatively small temperature differences. Application of the heat or coolth storage capacity of this structure for preheating or pre-cooling is also one among the advantages of this structure for shifting load and exploiting the nighttime cheap electricity tariff in some regions. This paper presents the technology of the active pipe-embedded structure for utilizing widely existing low-grade energy sources following by a comprehensive review on the heat transfer calculation models of this structure and its practical applications in real building systems for space air-conditioning. This review shows that more works on the active structure, especially simple and transient models for dynamic and accurate performance prediction and easy integration with existing building energy simulation packages, are worthwhile for further promoting the practical application wherever the low-grade energy sources are favorable.

[1]  Mahmut Uludag,et al.  A simplified model for radiant heating and cooling panels , 1994, Simul. Pract. Theory.

[2]  Arif Hepbasli,et al.  A key review on exergetic analysis and assessment of renewable energy resources for a sustainable future , 2008 .

[3]  Georgios A. Florides,et al.  Review of solar and low energy cooling technologies for buildings , 2002 .

[4]  Lawrence S. Lewin,et al.  Setting the Record Straight , 1988 .

[5]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[6]  K. A. Antonopoulos,et al.  Experimental evaluation of energy savings in air-conditioning using metal ceiling panels , 1998 .

[7]  Abdelaziz Laouadi.  Development of a radiant heating and cooling model for building energy simulation software , 2004 .

[8]  R. Winwood,et al.  Advanced fabric energy storage I: Review , 1997 .

[9]  G. Tiwari,et al.  Heating and cooling of a building by double hollow concrete slab , 1981 .

[10]  S. Rees,et al.  Modeling snow melting on heated pavement surfaces. Part I: Model development , 2007 .

[11]  K. A. Antonopoulos,et al.  Experimental and theoretical studies of space cooling using ceiling-embedded piping , 1997 .

[12]  Mehmet Esen,et al.  Forecasting of a ground-coupled heat pump performance using neural networks with statistical data weighting pre-processing , 2008 .

[13]  I. B. Kilkis,et al.  Computer-aided design of radiant subfloor heating systems , 1995 .

[14]  Corina Stetiu,et al.  Energy and peak power savings potential of radiant cooling systems in US commercial buildings , 1999 .

[15]  Andreas K. Athienitis,et al.  Thermal Analysis and Design of Passive Solar Buildings , 2000 .

[16]  Richard Karl Strand,et al.  Modeling Radiant Systems in an Integrated Heat Balance Based Energy Simulation Program , 2002 .

[17]  Laurentiu Fara,et al.  Experimental research on bitumen preheating (fluidization) by using solar energy in passive mode , 2009 .

[18]  Hongxing Yang,et al.  Heat transfer analysis of ground heat exchangers with inclined boreholes , 2006 .

[19]  Z. Fang,et al.  Heat transfer in ground heat exchangers with groundwater advection , 2004 .

[20]  Hongxing Yang,et al.  Numerical analysis and experimental validation of heat transfer in ground heat exchangers in alternative operation modes , 2008 .

[21]  Richard Karl Strand.  Heat source transfer functions and their application to low temperature radiant heating systems , 1995 .

[22]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[23]  Brian Horrigan.  Within These Walls , 2002 .

[24]  Marcel Lacroix,et al.  Control of a hybrid solar/electric thermal energy storage system , 2009 .

[25]  Georgios A. Florides,et al.  Ground heat exchangers—A review of systems, models and applications , 2007 .

[26]  M. B. Pate,et al.  An experimental study of the transient response of a radiant panel ceiling and enclosure , 1986 .

[27]  Tim Weber,et al.  An optimized RC-network for thermally activated building components , 2005 .

[28]  Bin Chen,et al.  Chinese kang as a domestic heating system in rural northern China—A review , 2009 .

[29]  Viktor Dorer,et al.  Application range of thermally activated building systems tabs , 2007 .

[30]  M. B. Pate,et al.  A new approach for designing heating panels with embedded tubes , 1989 .

[31]  K. A. Antonopoulos,et al.  Periodic steady-state heat transfer in cooling panels , 1993 .

[32]  Aydın Durmuş,et al.  Unsteady heat transfer by natural convection in the cavity of a passive heating room , 2008 .

[33]  J. K. Nayak.  Thermal performance of a water wall , 1987 .

[34]  Kimon A. Antonopoulos,et al.  Numerical solution of unsteady three-dimensional heat transfer during space cooling using ceiling-embedded piping , 1997 .

[35]  N. K. Bansal,et al.  Analysis of passive heating concepts , 1983 .

[36]  Helmut E. Feustel,et al.  Hydronic radiant cooling — preliminary assessment☆ , 1995 .

[37]  M. S. Sodha,et al.  Thermal performance of a cool-pool system for passive cooling of a non-conditioned building , 1985 .

[38]  Tahsin Başaran,et al.  Thermal analysis of the heating system of the Small Bath in ancient Phaselis , 1998 .

[39]  Gerd Hauser,et al.  Computer simulation of hydronic heating/cooling system with embedded pipes , 2000 .

[40]  Tim Weber,et al.  Validation of a FEM-program (frequency-domain) and a simplified RC-model (time-domain) for thermally activated building component systems (TABS) using measurement data , 2005 .

[41]  K. A. Antonopoulos.  Analytical and numerical heat transfer in cooling panels , 1992 .

[42]  M. S. Sodha,et al.  A review—Cooling by water evaporation over roof , 1982 .

[43]  L. O. Andersson.  Storage of heat and coolth in hollow-core concrete slabs. Swedish experience, and application to large, American-style buildings , 2011 .

[44]  S. Rees,et al.  Modeling snow melting on heated pavement surfaces. Part II: Experimental validation , 2007 .

[45]  Fengzhong Sun,et al.  Experimental research of heat transfer performance on natural draft counter flow wet cooling tower under cross-wind conditions , 2008 .

[46]  A. Ucar,et al.  A finite element model of solar heating system with underground storage , 2008 .

[47]  Viktor Dorer,et al.  Interaction of an air system with concrete core conditioning , 1999 .