Study of lithographic characteristics due to differences in novolac resin structure

Our earlier studies pointed to a strong correlation between the molecular weight of novolac resin and lithographic characteristics. In particular, they showed that the resolution and DOF characteristics of resists may be improved by controlling molecular weight distribution. The present study focuses on photoactive compound (PAC) structure and resin structure. This paper discusses the effects of differences in PAC ballast structure and the composition of m-cresol (metacresol), p-cresol (para-cresol), and xylenol, phenolic monomers that constitute novolac resin, on resolution and lithographic characteristics, based on development rates and resist pattern simulations.

[1]  K. Chiong,et al.  Sub-Halfmicron Negative Resist Systems By Image Reversal , 1987, Advanced Lithography.

[2]  Yoshihisa Sensu,et al.  Calculating development parameters for chemically amplified resists by the film-reducing method , 2013, Advanced Lithography.

[3]  Ronald L. Fischer,et al.  Resist Dissolution Kinetics And Submicron Process Control , 1988, Advanced Lithography.

[4]  Peter Trefonas,et al.  New Principle For Image Enhancement In Single Layer Positive Photoresists , 1987, Advanced Lithography.

[5]  Yoko Matsumoto,et al.  Effects of phenolic compound addition to fractionated Novolak-based resists to improve resolution capability(2) , 2017, Advanced Lithography.

[6]  Chris A. Mack,et al.  Resist metrology for lithography simulation, part 2: development parameter measurements , 1996, Advanced Lithography.

[7]  Atsushi Sekiguchi,et al.  Study of the lithography characteristics of novolak resist at different PAC concentrations , 2012, Other Conferences.

[8]  Akio Kinugawa,et al.  Molecular weight distribution measurements of liquid crystalline aromatic polyesters by gel permeation chromatography. , 1988 .

[9]  Atsushi Sekiguchi,et al.  Relationship between Dissolution Property and Molecular Weight of Positive-tone Novolak Resist , 2009 .

[10]  Chris A. Mack,et al.  Resist metrology for lithography simulation, part I: exposure parameter measurements , 1996, Advanced Lithography.

[11]  Atsushi Sekiguchi,et al.  Enhancing the Novolak resin resist resolution by adding phenol to fractionated resin , 2016, SPIE Advanced Lithography.