Research Status and Application Prospects of Digital Technology in Orthopaedics

In the last 10 years, basic and clinical research in orthopaedics has developed rapidly. Understanding of orthopaedic disorders involves not only routine diagnosis, but also the pursuit of highly efficient and accurate three‐dimensional imaging of the intra‐ and extra‐medullary distribution, form and structure of orthopaedic disorders, thus allowing scientific evaluation of the indications for surgery, drawing up of the best surgical plan, minimization of operative trauma and the earliest possible restoration of limb function. Meanwhile, the most important type of basic research, which was previously biomechanical research, has gradually become computational biomechanics based on in vitro cadaver experiments. This review aims to summarize the research status and application prospects of digital technology in orthopaedics, including virtual reality technology, reverse engineering and rapid prototyping techniques, computational biomechanics, computer navigation technology and management of digitization of medical records.

[1]  Alvin Chao-Yu Chen,et al.  Repositioning osteotomy for intra-articular malunion of distal radius with radiocarpal and/or distal radioulnar joint subluxation. , 2010, The Journal of trauma.

[2]  Kevin B. Jones,et al.  Intraoperative navigation for minimally invasive resection of periarticular and pelvic tumors. , 2011, Orthopedics.

[3]  Wei Sun,et al.  Recent development on computer aided tissue engineering - a review , 2002, Comput. Methods Programs Biomed..

[4]  Rob J P M Scholten,et al.  Computer-assisted surgery for knee ligament reconstruction. , 2014, The Cochrane database of systematic reviews.

[5]  J N A L Leijnse,et al.  Reverse engineering finger extensor apparatus morphology from measured coupled interphalangeal joint angle trajectories - a generic 2D kinematic model. , 2012, Journal of biomechanics.

[6]  C. Meyer,et al.  How accurate is image-free computer navigation for hip resurfacing arthroplasty? An anatomical investigation , 2009, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[7]  T. Renkawitz,et al.  The role of the transverse acetabular ligament for acetabular component orientation in total hip replacement: an analysis of acetabular component position and range of movement using navigation software. , 2011, The Journal of bone and joint surgery. British volume.

[8]  W. Brekelmans,et al.  A new method to analyse the mechanical behaviour of skeletal parts. , 1972, Acta orthopaedica Scandinavica.

[9]  D. Hernández-Vaquero,et al.  Computer Assistance Increases Precision of Component Placement in Total Knee Arthroplasty with Articular Deformity , 2010, Clinical orthopaedics and related research.

[10]  H. Skinner,et al.  Prediction of femoral fracture load using automated finite element modeling. , 1997, Journal of biomechanics.

[11]  R. Scholten,et al.  Computer assisted surgery for knee ligament reconstruction. , 2011, The Cochrane database of systematic reviews.

[12]  P A Webb,et al.  A review of rapid prototyping (RP) techniques in the medical and biomedical sector , 2000, Journal of medical engineering & technology.

[13]  T Fannin,et al.  Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. , 1999, Journal of medical engineering & technology.

[14]  David Fabi,et al.  Digital templating in primary total hip and knee arthroplasty. , 2010, Orthopedics.

[15]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[16]  M. Dowsey,et al.  Joint line position correlates with function after primary total knee replacement: a randomised controlled trial comparing conventional and computer-assisted surgery. , 2011, The Journal of bone and joint surgery. British volume.

[17]  Jason L Koh.  The Future of Computer-assisted Surgery (CAS) in Sports Medicine , 2008, Sports medicine and arthroscopy review.

[18]  Jiying Chen,et al.  Comparison between computer-assisted-navigation and conventional total knee arthroplasties in patients undergoing simultaneous bilateral procedures: a randomized clinical trial. , 2011, The Journal of bone and joint surgery. American volume.

[19]  Validation of navigation assisted cup placement in total hip arthroplasty , 2011, International Orthopaedics.

[20]  Y. Toshev,et al.  MEDICAL RAPID PROTOTYPING APPLICATIONS AND METHODS , 2005 .

[21]  Amir A Jamali,et al.  Accuracy of Computer Navigation for Acetabular Component Placement in THA , 2010, Clinical orthopaedics and related research.

[22]  A. Amis,et al.  Rapid prototyping for orthopaedic surgery , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[23]  Naoki Suzuki,et al.  Four-dimensional model of the lower extremity after total hip arthroplasty. , 2005, Journal of biomechanics.

[24]  J. George,et al.  Rapid prototyping medical models for dysplastic hip orthopaedic surgery , 2010 .

[25]  R. Detsch,et al.  Static and dynamic cultivation of bone marrow stromal cells on biphasic calcium phosphate scaffolds derived from an indirect rapid prototyping technique , 2010, Journal of materials science. Materials in medicine.

[26]  Su A. Park,et al.  Fabrication of nano/microfiber scaffolds using a combination of rapid prototyping and electrospinning systems , 2011 .

[27]  E H Schemitsch,et al.  Imageless computer navigation for placement of the femoral component in resurfacing arthroplasty of the hip. , 2009, The Journal of bone and joint surgery. British volume.

[28]  D A Lindberg.  Global information infrastructure. , 1994, International journal of bio-medical computing.

[29]  Mithra Vankipuram,et al.  A virtual reality simulator for orthopedic basic skills: A design and validation study , 2010, J. Biomed. Informatics.

[30]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[31]  R J Minns,et al.  The use of a reconstructed three-dimensional solid model from CT to aid the surgical management of a total knee arthroplasty: a case study. , 2003, Medical engineering & physics.

[32]  T S Smith,et al.  Three‐dimensional microimaging (MRμI and μCT), finite element modeling, and rapid prototyping provide unique insights into bone architecture in osteoporosis , 2001, The Anatomical record.

[33]  William J Hozack,et al.  Computer-assisted surgery. , 2007, Orthopedics.

[34]  P. Benum,et al.  Customised femoral stems in osteopetrosis and the development of a guiding system for the preparation of an intramedullary cavity: a report of two cases. , 2010, The Journal of bone and joint surgery. British volume.

[35]  Christopher A. Bailey,et al.  Component Alignment in Hip Resurfacing Using Computer Navigation , 2009, Clinical orthopaedics and related research.

[36]  Yong Sook Lee,et al.  Visible Korean Human: Improved serially sectioned images of the entire body , 2005, IEEE Transactions on Medical Imaging.

[37]  R. Nelissen,et al.  A computed tomography based study on rotational alignment accuracy of the femoral component in total knee arthroplasty using computer-assisted orthopaedic surgery , 2010, International Orthopaedics.

[38]  R S Haluck,et al.  Computers and virtual reality for surgical education in the 21st century. , 2000, Archives of surgery.

[39]  L. Dorr,et al.  Hip Offset in Total Hip Arthroplasty: Quantitative Measurement with Navigation , 2011, Clinical orthopaedics and related research.

[40]  K S Leung,et al.  Image-guided navigation in orthopaedic trauma. , 2010, The Journal of bone and joint surgery. British volume.

[41]  G. Andersson,et al.  Reduction in segmental flexibility because of disc degeneration is accompanied by higher changes in facet loads than changes in disc pressure: a poroelastic C5-C6 finite element investigation. , 2010, The spine journal : official journal of the North American Spine Society.

[42]  K. F. Leong,et al.  Selective laser sintering of functionally graded tissue scaffolds , 2011 .

[43]  Christoph Josten,et al.  Finite element analysis of acetabular fractures--development and validation with a synthetic pelvis. , 2010, Journal of biomechanics.

[44]  Pheng-Ann Heng,et al.  Creation of the Chinese visible human data set. , 2003, Anatomical record. Part B, New anatomist.

[45]  Christine Andersen,et al.  Development of simulated arthroscopic skills , 2011, Acta orthopaedica.

[46]  V. Spitzer,et al.  The visible human male: a technical report. , 1996, Journal of the American Medical Informatics Association : JAMIA.

[47]  N. Schep,et al.  Computer assisted orthopaedic and trauma surgery. State of the art and future perspectives. , 2003, Injury.

[48]  Dachuan Xu,et al.  Novel patient-specific navigational template for total knee arthroplasty , 2011, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.

[49]  E Y Chao,et al.  A survey of finite element analysis in orthopedic biomechanics: the first decade. , 1983, Journal of biomechanics.

[50]  W A Kalender,et al.  Rapid protyping technology in medicine--basics and applications. , 1999, Computerized medical imaging and graphics : the official journal of the Computerized Medical Imaging Society.

[51]  D. König,et al.  Imageless navigation of hip resurfacing arthroplasty increases the implant accuracy , 2009, International Orthopaedics.

[52]  M Lengsfeld,et al.  Comparison of geometry-based and CT voxel-based finite element modelling and experimental validation. , 1998, Medical engineering & physics.

[53]  Russell H. Taylor,et al.  Development of a Surgical Robot for Cementless Total Hip Arthroplasty , 1992, Clinical orthopaedics and related research.

[54]  Yi Hao,et al.  Three-dimensional morphological characteristics measurement of ankle joint based on computed tomography image post-processing. , 2011, Chinese medical journal.

[55]  R E Guldberg,et al.  The accuracy of digital image-based finite element models. , 1998, Journal of biomechanical engineering.

[56]  Lu Bingheng,et al.  Design and fabrication of custom mandible titanium tray based on rapid prototyping. , 2004, Medical engineering & physics.

[57]  E. Schemitsch,et al.  Avoiding Short-term Femoral Neck Fracture With Imageless Computer Navigation for Hip Resurfacing , 2011, Clinical orthopaedics and related research.

[58]  K. Nguyen,et al.  A review of materials, fabrication methods, and strategies used to enhance bone regeneration in engineered bone tissues. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[59]  P. Rogala,et al.  Selective laser melted prototype of original minimally invasive resurfacing hip endoprosthesis , 2011 .

[60]  L. Dorr,et al.  Quantification of Pelvic Tilt in Total Hip Arthroplasty , 2010, Clinical orthopaedics and related research.

[61]  A D Linney,et al.  Validation of computer-assisted manufacture of titanium plates for cranioplasty. , 1999, International journal of oral and maxillofacial surgery.

[62]  DW Hutmacher,et al.  Concepts of scaffold-based tissue engineering—the rationale to use solid free-form fabrication techniques , 2007, Journal of cellular and molecular medicine.

[63]  Nobuhiko Sugano,et al.  A Comparison between Robotic-assisted and Manual Implantation of Cementless Total Hip Arthroplasty , 2010, Clinical orthopaedics and related research.

[64]  Gerhard A. Holzapfel,et al.  A Layer-Specific Three-Dimensional Model for the Simulation of Balloon Angioplasty using Magnetic Resonance Imaging and Mechanical Testing , 2002, Annals of Biomedical Engineering.

[65]  N. Sugano.  Computer-assisted orthopedic surgery , 2003, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[66]  Y. Won,et al.  Navigation-Assisted Total Knee Arthroplasty for the Knee Retaining Femoral Intramedullary Nail, and Distal Femoral Plate and Screws , 2011, Clinics in orthopedic surgery.

[67]  M J Ackerman,et al.  The Visible Human Project: a resource for education. , 1999, Academic medicine : journal of the Association of American Medical Colleges.