CoS 2 @SC modified separator for high-performance lithium-sulfur batteries: suppression of polysulfide shuttling

[1]  M. Fowler,et al.  Predicting temperature distribution of passively balanced battery module under realistic driving conditions through coupled equivalent circuit method and lumped heat dissipation method , 2023, Journal of Energy Storage.

[2]  M. Fowler,et al.  Thermal behaviour of Li-ion battery: An improved electrothermal model considering the effects of depth of discharge and temperature , 2023, Journal of Energy Storage.

[3]  M. Fowler,et al.  Multi-Objective Optimization Design and Experimental Investigation for a Prismatic Lithium-Ion Battery Integrated with a Multi-Stage Tesla Valve-Based Cold Plate , 2023, Processes.

[4]  M. Fowler,et al.  Optimization of the Cooling Performance of Symmetric Battery Thermal Management Systems at High Discharge Rates , 2023, Energy & Fuels.

[5]  Liangliang Yue,et al.  A Review of Transition Metal Compounds as Functional Separators for Lithium‐Sulfur Batteries , 2023, ChemistrySelect.

[6]  Chuanbai Yu,et al.  Application of transition metal compounds in cathode materials for lithium-sulfur battery , 2022, Ionics.

[7]  Xueping Gao,et al.  Perovskite Transition Metal Oxide of Nanofibers as Catalytic Hosts for Lithium–Sulfur Battery , 2022, SSRN Electronic Journal.

[8]  Jiaqi Huang,et al.  An encapsulating lithium-polysulfide electrolyte for practical lithium–sulfur batteries , 2022, Chem.

[9]  Zhen-guo Wu,et al.  N, O co-doped chlorella-based biomass carbon modified separator for lithium-sulfur battery with high capacity and long cycle performance. , 2020, Journal of colloid and interface science.

[10]  Xin Wang,et al.  Design and Construction of Graphitic/Amorphous Heterophase Porous Carbon with a Lotus-Leaf-like Surface Microstructure for High-Performance Li-Ion and Na-Ion Batteries , 2020, Industrial & Engineering Chemistry Research.

[11]  Eric J. Dufek,et al.  Dual Functional Ni3S2@Ni Core–Shell Nanoparticles Decorating Nanoporous Carbon as Cathode Scaffolds for Lithium–Sulfur Battery with Lean Electrolytes , 2020 .

[12]  Jiecai Han,et al.  Molecular ‘capturing’ and ‘seizing’ MoS2/TiN interlayers suppress polysulfide shuttling and self-discharge of Li–S batteries , 2020 .

[13]  J. Yu,et al.  Enhanced Multiple Anchoring and Catalytic Conversion of Polysulfides by Amorphous MoS3 Nanoboxes for High-Performance Li-S Batteries. , 2020, Angewandte Chemie.

[14]  Feng Wu,et al.  Curbing polysulfide shuttling by synergistic engineering layer composed of supported Sn4P3 nanodots electrocatalyst in lithium-sulfur batteries , 2020 .

[15]  Gang Wu,et al.  Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries , 2020, InfoMat.

[16]  Jun Lu,et al.  Switchable encapsulation of polysulfides in the transition between sulfur and lithium sulfide , 2020, Nature Communications.

[17]  Xiaoting Lin,et al.  Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High‐Sulfur‐Loading Li–S Batteries , 2019, Advanced materials.

[18]  X. Qin,et al.  N-doped carbon-coated hollow carbon nanofibers with interspersed TiO2 for integrated separator of Li-S batteries , 2019, Electrochimica Acta.

[19]  Jun Lu,et al.  Interlayer Material Selection for Lithium-Sulfur Batteries , 2019, Joule.

[20]  Zhigang Xue,et al.  Dual-Functional Interlayer Based on Radially Oriented Ultrathin MoS2 Nanosheets for High-Performance Lithium–Sulfur Batteries , 2019, ACS Applied Energy Materials.

[21]  Zhiqiang Niu,et al.  Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries , 2019, Carbon.

[22]  Yike Gao,et al.  Preparation of SnO2@rGO/CNTs/S composite and application for lithium-sulfur battery cathode material , 2018, Applied Surface Science.

[23]  Tao Qian,et al.  Progress and perspective of organosulfur polymers as cathode materials for advanced lithium-sulfur batteries , 2018, Energy Storage Materials.

[24]  Q. Jiang,et al.  Advances in Cathode Materials for High-Performance Lithium-Sulfur Batteries , 2018, iScience.

[25]  Hong‐Jie Peng,et al.  Scaled-up fabrication of porous-graphene-modified separators for high-capacity lithium–sulfur batteries , 2017 .

[26]  L. Arava,et al.  Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis. , 2017, Journal of the American Chemical Society.

[27]  Ke Li,et al.  Advanced Separators for Lithium-Ion and Lithium-Sulfur Batteries: A Review of Recent Progress. , 2016, ChemSusChem.

[28]  Zhe Yuan,et al.  Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts. , 2016, Nano letters.

[29]  L. Novotný,et al.  Raman characterization of defects and dopants in graphene , 2015, Journal of physics. Condensed matter : an Institute of Physics journal.

[30]  M. Fowler,et al.  Battery thermal runaway propagation time delay strategy using phase change material integrated with pyro block lining: Dual functionality battery thermal design , 2023, Journal of Energy Storage.

[31]  T. Liu,et al.  Sucrose derived microporous–mesoporous carbon for advanced lithium–sulfur batteries , 2021 .

[32]  Hui Liu,et al.  Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries , 2021 .

[33]  Siyi Chen,et al.  Carbon-free sulfur-based composite cathode for advanced Lithium-Sulfur batteries: A case study of hierarchical structured CoMn2O4 hollow microspheres as sulfur immobilizer , 2020 .

[34]  Xianyou Wang,et al.  Honeycomb-like nitrogen and sulfur dual-doped hierarchical porous biomass carbon bifunctional interlayer for advanced lithium-sulfur batteries , 2019, Chemical Engineering Journal.

[35]  Qiang Zhang,et al.  Review—Li Metal Anode in Working Lithium-Sulfur Batteries , 2018 .