A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

In this paper, a three-dimensional PEM fuel cell model with a consistent water transport treatment in the membrane electrode assembly (MEA) has been developed. In this new PEM fuel cell model, the conservation equation of the water concentration is solved in the gas channels, gas diffusion layers, and catalyst layers while a conservation equation of the water content is established in the membrane. These two equations are connected using a set of internal boundary conditions based on the thermodynamic phase equilibrium and flux equality at the interface of the membrane and the catalyst layer. The existing fictitious water concentration treatment, which assumes thermodynamic phase equilibrium between the water content in the membrane phase and the water concentration, is applied in the two catalyst layers to consider water transport in the membrane phase. Since all the other conservation equations are still developed and solved in the single-domain framework without resort to interfacial boundary conditions, the present new PEM fuel cell model is termed as a mixed-domain method. Results from this mixed-domain approach have been compared extensively with those from the single-domain method, showing good accuracy in terms of not only cell performances and current distributions but also water content variations in the membrane.

[1]  Chao-Yang Wang,et al.  Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells , 2000 .

[2]  C.Y. Wang,et al.  Multidimensional Modelling of Polymer Electrolyte Fuel Cells under a Current Density Boundary Condition , 2005 .

[3]  A. A. Kulikovsky,et al.  Quasi-3D Modeling of Water Transport in Polymer Electrolyte Fuel Cells , 2003 .

[4]  Nathan P. Siegel,et al.  Single domain PEMFC model based on agglomerate catalyst geometry , 2003 .

[5]  Adam Z. Weber,et al.  Transport in Polymer-Electrolyte Membranes I. Physical Model , 2004 .

[6]  Chao-Yang Wang,et al.  Modeling Polymer Electrolyte Fuel Cells with Large Density and Velocity Changes , 2005 .

[7]  Hyunchul Ju,et al.  Experimental Validation of a PEM Fuel Cell Model by Current Distribution Data , 2004 .

[8]  Hyunchul Ju,et al.  Nonisothermal Modeling of Polymer Electrolyte Fuel Cells I. Experimental Validation , 2005 .

[9]  Ned Djilali,et al.  THREE-DIMENSIONAL COMPUTATIONAL ANALYSIS OF TRANSPORT PHENOMENA IN A PEM FUEL CELL , 2002 .

[10]  S. Dutta,et al.  Three-dimensional numerical simulation of straight channel PEM fuel cells , 2000 .

[11]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[12]  Chao-Yang Wang,et al.  Computational study of water transport in proton exchange membrane fuel cells , 2006 .

[13]  Sandip Mazumder,et al.  Rigorous 3-D mathematical modeling of PEM fuel cells. II. Model predictions with liquid water transport , 2003 .

[14]  Sirivatch Shimpalee,et al.  Predicting water and current distributions in a commercial-size PEMFC , 2004 .

[15]  Hyunchul Ju,et al.  A single-phase, non-isothermal model for PEM fuel cells , 2005 .

[16]  Chao-Yang Wang,et al.  Ultra large-scale simulation of polymer electrolyte fuel cells , 2006 .

[17]  Chao-Yang Wang,et al.  Large-scale simulation of polymer electrolyte fuel cells by parallel computing , 2004 .

[18]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[19]  H. Callen.  Thermodynamics and an Introduction to Thermostatistics , 1988 .

[20]  H. Meng.  A simplified method for solving anisotropic transport phenomena in PEM fuel cells , 2006 .

[21]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[22]  Chao-Yang Wang,et al.  Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells , 2005 .