Enhanced strength-ductility synergy in a new 2.2 GPa grade ultra-high strength stainless steel with balanced fracture toughness: Elucidating the role of duplex aging treatment

[1]  Z. Jiao,et al.  Cu-assisted austenite reversion and enhanced TRIP effect in maraging stainless steels , 2022, Journal of Materials Science & Technology.

[2]  Jae Sang Lee,et al.  Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite , 2021, Acta Materialia.

[3]  P. Hodgson,et al.  The effect of austenite reversion on the microstructure and mechanical properties of a 12Cr–3Ni–3Mn–3Cu-0.15Nb–0.05C maraging stainless steel , 2021, Materials Science and Engineering: A.

[4]  N. Chen,et al.  Revealing carbide precipitation effects and their mechanisms during quenching-partitioning-tempering of a high carbon steel: Experiments and Modeling , 2021 .

[5]  G. Sheng,et al.  Elucidating the role of secondary cryogenic treatment on mechanical properties of a martensitic ultra-high strength stainless steel , 2021, Materials Characterization.

[6]  H. Yen,et al.  HRTEM investigations on nano precipitates in Custom 475 maraging stainless steel , 2021 .

[7]  A. Beese,et al.  Impact of retained austenite on the aging response of additively manufactured 17-4 PH grade stainless steel , 2021 .

[8]  Z. Jiao,et al.  Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates , 2021 .

[9]  Chenchong Wang,et al.  A review of the thermal stability of metastable austenite in steels: Martensite formation , 2021 .

[10]  Jie Su,et al.  Correlation between the microstructure and hydrogen embrittlement resistance in a precipitation-hardened martensitic stainless steel , 2021 .

[11]  Yiyi Li,et al.  Ultrafine-grained dual-phase maraging steel with high strength and excellent cryogenic toughness , 2021 .

[12]  Youtong Fang,et al.  Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys , 2021 .

[13]  Jung hyo Park,et al.  2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness , 2021 .

[14]  C. Dong,et al.  Designing ultrastrong maraging stainless steels with improved uniform plastic strain via controlled precipitation of coherent nanoparticles , 2021 .

[15]  Y. Tian,et al.  Refinement of Cu-M2C precipitates and improvement of strength and toughness by Ti microalloying in a Cu-bearing steel , 2020 .

[16]  Mingxin Huang,et al.  Optimising the strength-ductility-toughness combination in ultra-high strength quenching and partitioning steels by tailoring martensite matrix and retained austenite , 2020 .

[17]  E. Pereloma,et al.  Clustering, nano-scale precipitation and strengthening of steels , 2020 .

[18]  W. M. Rainforth,et al.  Effect of ageing on the microstructural evolution in a new design of maraging steels with carbon , 2020 .

[19]  Zhen-bao Liu,et al.  Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel , 2020 .

[20]  R. Ritchie,et al.  Making ultrastrong steel tough by grain-boundary delamination , 2020, Science.

[21]  Mingxin Huang,et al.  The role of interstitial carbon atoms on the strain-hardening rate of twinning-induced plasticity steels , 2020 .

[22]  D. Ponge,et al.  Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels , 2020, Science Advances.

[23]  Huajian Gao,et al.  Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength , 2020, Proceedings of the National Academy of Sciences.

[24]  J. P. Li,et al.  Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel , 2020 .

[25]  R. Misra,et al.  Reverted austenite with distinct characteristics in a new cobalt-free low lattice misfit precipitate-bearing 19Ni3Mo1.5Ti maraging steel , 2019 .

[26]  H. Luo,et al.  Progress and Perspective of Ultra-High Strength Steels Having High Toughness , 2019 .

[27]  G. Rubiolo,et al.  Effect of Ti additions on phase transitions, lattice misfit, coarsening, and hardening mechanisms in a Fe2AlV-strengthened ferritic alloy , 2019, Journal of Alloys and Compounds.

[28]  V. Dravid,et al.  A novel low cost 2000 MPa grade ultra-high strength steel with balanced strength and toughness , 2019, Materials Science and Engineering: A.

[29]  Zhou-hua Jiang,et al.  Effect of tempering temperature on the microstructure and properties of ultrahigh-strength stainless steel , 2019, Journal of Materials Science & Technology.

[30]  Z. Jiao,et al.  Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions , 2019, Acta Materialia.

[31]  Ke Yang,et al.  Precipitate Evolution and Strengthening Behavior During Aging Process in a 2.5 GPA Grade Maraging Steel , 2019, Acta Materialia.

[32]  C. Domain,et al.  Quantification of hardening contribution of G-Phase precipitation and spinodal decomposition in aged duplex stainless steel: APT analysis and micro-hardness measurements , 2019, Journal of Nuclear Materials.

[33]  R. Misra,et al.  Aging phenomenon in low lattice-misfit cobalt-free maraging steel: Microstructural evolution and strengthening behavior , 2019, Materials Science and Engineering: A.

[34]  Zhou-hua Jiang,et al.  Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel , 2018, Materials Characterization.

[35]  Sheng-wu Guo,et al.  A low-alloy high-carbon martensite steel with 2.6 GPa tensile strength and good ductility , 2018, Acta Materialia.

[36]  Wen-qing Liu,et al.  Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel , 2018, Acta Materialia.

[37]  Ke Yang,et al.  Research and Development of Maraging Stainless Steel Used for New Generation Landing Gear , 2018 .

[38]  Zhou-hua Jiang,et al.  Effect of solid-solution temperature on the microstructure and properties of ultra-high-strength ferrium S53® steel , 2018, Materials Science and Engineering: A.

[39]  H. Bhadeshia,et al.  A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates , 2018 .

[40]  G. Gutiérrez,et al.  Tensile behavior of Cu 50 Zr 50 metallic glass nanowire with a B2 crystalline precipitate , 2018 .

[41]  Wei Li,et al.  The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel , 2017 .

[42]  B. Hu,et al.  High dislocation density–induced large ductility in deformed and partitioned steels , 2017, Science.

[43]  Xiaohui Wang,et al.  Hot deformation characterization of ultrahigh strength stainless steel through processing maps generated using different instability criteria , 2017 .

[44]  S. Ghosh,et al.  Structure-property relationship in a 2 GPa grade micro-alloyed ultrahigh strength steel , 2017 .

[45]  Dierk Raabe,et al.  Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation , 2017, Nature.

[46]  W. M. Rainforth,et al.  Microstructural evolution of Mn-based maraging steels and their influences on mechanical properties , 2016 .

[47]  Wei Yan,et al.  Three dimensional atom probe and first-principles studies on spinodal decomposition of Cr in a Co-alloyed maraging stainless steel , 2016 .

[48]  Yifu Shen,et al.  A new 1.9 GPa maraging stainless steel strengthened by multiple precipitating species , 2015 .

[49]  P. Rivera-Díaz-del-Castillo,et al.  A model for the microstructure behaviour and strength evolution in lath martensite , 2015 .

[50]  E. Kozeschnik,et al.  A model for precipitation strengthening in multi-particle systems , 2014 .

[51]  Y. Estrin,et al.  Revisiting the Considère criterion from the viewpoint of dislocation theory fundamentals , 2014 .

[52]  P. Rivera-Díaz-del-Castillo,et al.  Computational design of nanostructured steels employing irreversible thermodynamics , 2013 .

[53]  Daniel Schwen,et al.  On the analytic calculation of critical size for alpha prime precipitation in FeCr , 2013 .

[54]  David N. Seidman,et al.  Prediction of the yield strength of a secondary-hardening steel , 2013 .

[55]  V. Kain,et al.  Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel , 2013 .

[56]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[57]  I. Steinbach,et al.  On the formation and growth of Mo-rich Laves phase particles during long-term creep of a 12% chromium tempered martensite ferritic steel , 2009 .

[58]  Yi-Rong He,et al.  Age hardening and mechanical properties of a 2400 MPa grade cobalt-free maraging steel , 2006 .

[59]  Y. Tomita.  Development of fracture toughness of ultrahigh strength, medium carbon, low alloy steels for aerospace applications , 2000 .

[60]  H. Grabke,et al.  Some aspects of intermetallic phase precipitation in a 12% Cr-steel , 1995 .

[61]  A. Allen,et al.  SANS and TEM studies of isothermal M2C carbide precipitation in ultrahigh strength AF1410 steels , 1993 .

[62]  J. Wagner.  Correlation of mechanical properties with metallurgical structure for 18Ni 200 grade maraging steel at room and cryogenic temperatures , 1991 .

[63]  W. Garrison.  Ultrahigh-strength steels for aerospace applications , 1990 .

[64]  R. Wagner.  Hardening in spinodally decomposed alloys , 1981 .

[65]  M. Holzmann,et al.  The effect of microstructure on the fracture toughness of structural steels , 1981 .

[66]  M. Kato.  Hardening by spinodally modulated structure in b.c.c. alloys , 1981 .

[67]  G. Maniar,et al.  EFFECT OF REVERTED AUSTENITE ON THE MECHANICAL PROPERTIES AND TOUGHNESS OF A HIGH STRENGTH MARAGING STAINLESS STEEL CUSTOM 450 , 1980 .

[68]  W. C. Leslie.  Iron and its dilute substitutional solid solutions , 1972 .

[69]  D. Kalish,et al.  The strength and fracture toughness of 18 Ni (350) maraging steel , 1971 .

[70]  C. S. Carter,et al.  STRESS-CORROSION PROPERTIES OF HIGH-STRENGTH PRECIPITATION-HARDENING STAINLESS STEELS IN 3.5% AQUEOUS SODIUM CHLORIDE SOLUTION , 1970 .

[71]  R. Labusch.  A Statistical Theory of Solid Solution Hardening , 1970 .

[72]  S. Takeuchi.  Solid-Solution Strengthening in Single Crystals of Iron Alloys , 1969 .

[73]  G. Pellissier.  Effects of microstructure on the fracture toughness of ultrahigh-strength steels , 1968 .