Carbon monoxide formation and emissions during waste incineration in a grate-circulating fluidized bed incinerator.
暂无分享,去创建一个
Aihong Meng | Changhe Chen | Chang-he Chen | Qinghai Li | A. Meng | Qinghai Li | Yanguo Zhang | Yan‐guo Zhang
[1] Kenji Amagai,et al. Combustion characteristics of waste material containing high moisture , 2001 .
[2] Haihui Wang,et al. Role of inherent water in low-temperature oxidation of coal , 2003 .
[3] K. McDonnell,et al. Dispersion modelling and measurement of emissions from the co-combustion of meat and bone meal with peat in a fluidised bed. , 2006, Bioresource technology.
[4] H. Tseng,et al. Pollutants in incineration flue gas. , 2001, Journal of hazardous materials.
[5] Nurdil Eskin,et al. Analysis of environmental benefits of CFB combustors via one-dimensional model , 2007 .
[6] J. Swithenbank,et al. Mathematical modelling of particle mixing effect on the combustion of municipal solid wastes in a packed-bed furnace. , 2008, Waste management.
[7] Kriengkrai Suksankraisorn,et al. Co-combustion of municipal solid waste and thailignite in a fluidized bed , 2004 .
[8] K. Hein,et al. Interactions of CO, HCl, and Sox in Pulverised Coal Flames , 2004 .
[9] Liu Qinghai,et al. Experimental study on drying of typical MSW under incinerator-like conditions , 2007 .
[10] Jim Swithenbank,et al. Mathematical modelling of the burning bed of a waste incinerator , 1998 .
[11] J. Swithenbank,et al. Effects of fuel devolatilisation on the combustion of wood chips and incineration of simulated municipal solid wastes in a packed bed , 2003 .
[12] Roland Weber,et al. Correlation of PCDD/PCDF and CO values in a MSW incinerator--indication of memory effects in the high temperature/cooling section. , 2002, Chemosphere.
[13] Qinghai Li,et al. Municipal solid waste fueled power generation in China: a case study of waste-to-energy in Changchun City. , 2007, Environmental science & technology.
[14] Gerard Martin,et al. Modelling of gaseous pollutants emissions in circulating fluidized bed combustion of municipal refuse , 1998 .
[15] Fernando Rojas,et al. A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition☆ , 2003 .
[16] Y. Levendis,et al. Laboratory Investigation of the Products of the Incomplete Combustion of Waste Plastics and Techniques for Their Minimization , 2004 .
[17] Mohammad. Rasul,et al. Spouted bed combustion of wood charcoal: Performance comparison of three different designs , 2001 .
[18] Bundit Fungtammasan,et al. Effects of operating parameters on the combustion of medical waste in a controlled air incinerator , 2005 .
[19] W. Permchart,et al. Fluidized bed combustion of pre-dried Thai bagasse , 2005 .
[20] T. Shimizu,et al. Fluidized Bed Combustion of Some Woody Biomass Fuels , 2008 .
[21] R. S. Magee,et al. Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration. , 2001, Chemosphere.
[22] Y. Pınar,et al. The emissions from a space-heating biomass stove , 2007 .
[23] Richard A. Yetter,et al. Kinetic interactions of CO, NOx, and HCI emissions in postcombustion gases , 1995 .
[24] S. Baǧci. Effect of Clay Content on Combustion Reaction Parameters , 2005 .
[25] F. Okasha. Staged combustion of rice straw in a fluidized bed , 2007 .
[26] C. Chao,et al. Co-combustion performance of coal with rice husks and bamboo , 2007 .