论文信息 - submitter : Performance simulation of a digital integrator for magnetic measurements at CERN

submitter : Performance simulation of a digital integrator for magnetic measurements at CERN

Abstract A fast digital integrator (FDI) has been designed at the European organization for nuclear research (CERN) for improving performance of state-of-art instruments for testing superconductive magnets in particle accelerators. In this paper, at first, the FDI architecture and the related main uncertainty sources are highlighted. Then, the numerical analysis of the instrument metrological performance is shown, by focusing both on deterministic errors and uncertainty effects, with the aim of addressing main design challenges.

Pasquale Arpaia | Alessandro Masi | Luca Bottura | Giovanni Spiezia

[1] Mehmet Karaköse,et al. A robust integrator algorithm with genetic based fuzzy controller feedback for direct vector control , 2003, Comput. Electr. Eng..

[2] L. Deniau,et al. The Multipoles Factory: an element of the LHC control , 2002 .

[3] Mohamad Adnan Al-Alaoui,et al. A class of second-order integrators and low-pass differentiators , 1995 .

[4] M.L. Walker,et al. A digital long pulse integrator , 1995, Proceedings of 16th International Symposium on Fusion Engineering.

[5] L. Walckiers,et al. Twin rotating coils for cold magnetic measurements of 15 m long LHC dipoles , 2000, IEEE Transactions on Applied Superconductivity.

[6] P Galbraith. Portable Digital Integrator , 1993 .

[7] Christodoulos Chamzas,et al. A new approach for the design of digital integrators , 1996 .

[8] Pasquale Arpaia,et al. Real-time algorithms for active power measurements on PWM-based electric drives , 1995 .

[9] Pasquale Arpaia,et al. Digital Integrator for Fast Accurate Measurement of Magnetic Flux by Rotating Coils , 2007, IEEE Transactions on Instrumentation and Measurement.

[10] K. Kurihara,et al. Development of an intelligent digital integrator for long-pulse operation in a tokamak , 2002, Proceedings of the 19th IEEE/IPSS Symposium on Fusion Engineering. 19th SOFE (Cat. No.02CH37231).

[11] Z. Cao,et al. DESIGN AND FABRICATION OF A ROTATING COIL MAGNETIC MEASUREMENT SYSTEM , 2001 .