Micromorphology, photophysical and electrical properties of pristine and ferric chloride doped poly(3-hexylthiophene) films

Abstract Poly(3-hexylthiophene) (P3HT), synthesized by chemical oxidative polymerization at ∼258 K, has been probed by Fourier transform infrared (FT-IR), ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy (SEM) and by measuring the temperature dependence of DC conductivity (σDC) in both its pristine and partially doped state. FT-IR and UV–vis studies suggest the formation of polaronic charge species in both pristine and partially doped P3HT. SEM of pristine P3HT film exhibits the formation of randomly distributed polymer fibrils whereas ferric chloride doped P3HT film shows the formation of dopant islands (size ∼500 nm), some of which adhered to the polymer fibrils. The temperature dependence of DC conductivity in the range 77–300 K is well explained by Mott's 3-dimensional variable range hopping (3D-VRH) model.

[1]  Ping Liu,et al.  Structurally Ordered Polythiophene Nanoparticles for High‐Performance Organic Thin‐Film Transistors , 2005 .

[2]  Epstein,et al.  ac conductivity of emeraldine polymer. , 1989, Physical review. B, Condensed matter.

[3]  R. Tandon,et al.  Electron spin resonance and conductivity investigations in the polypyrrole family of polymers , 1997 .

[4]  Manikandan Jayaraman,et al.  Design, synthesis, and control of conducting polymer architectures: structurally homogeneous poly(3-alkylthiophenes) , 1993 .

[5]  R. Tandon,et al.  Mechanism of charge transport in polypyrrole, poly(N‐methyl pyrrole) and their copolymers , 1996 .

[6]  Y. H. Kim,et al.  Structural and absorption studies of the thermochromic transition in poly(3-hexylthiophene) , 1989 .

[7]  Hari Singh Nalwa,et al.  Handbook of advanced electronic and photonic materials and devices , 2001 .

[8]  J. Fréchet,et al.  Polythiophene containing thermally removable solubilizing groups enhances the interface and the performance of polymer-titania hybrid solar cells. , 2004, Journal of the American Chemical Society.

[9]  N. Mott,et al.  Electronic Processes In Non-Crystalline Materials , 1940 .

[10]  A. Heeger,et al.  X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb , 1992 .

[11]  D. Moses,et al.  Poly(3-hexylthiophene) field-effect transistors with high dielectric constant gate insulator , 2004 .

[12]  M. Sandberg,et al.  Photochemical undoping of the poly(3-nonylthiophene-2,5-diyl)x+ xFeCl4− complex , 1993 .

[13]  K. N. Sood,et al.  Effect of thermal annealing on surface morphology and physical properties of poly(3-octylthiophene) films , 2005 .

[14]  K. Yoshino,et al.  Structure and thermochromic solid‐state phase transition of poly (3‐alkylthiophene) , 1991 .

[15]  D. Laplaze,et al.  Electrical conductivity study on polythiophenes films , 1995 .

[16]  A. Kaur,et al.  Mechanism of dc conduction in ferric chloride doped, poly(3-methyl thiophene) , 2003 .

[17]  Ghassan E. Jabbour,et al.  Organic-Based Photovoltaics: Toward Low-Cost Power Generation , 2005 .

[18]  H. Nalwa.  Handbook of organic conductive molecules and polymers , 1997 .

[19]  M. Berggren,et al.  Regioselective polymerization of 3-(4-octylphenyl)thiophene with FeCl3 , 1994 .

[20]  Daniel Moses,et al.  Hopping transport in doped conducting polymers in the insulating regime near the metal-insulator boundary: polypyrrole, polyaniline and polyalkylthiophenes , 1995 .

[21]  M. Rikukawa,et al.  Photocarrier Mobility in Regioregular Poly(3-hexylthiophene) Studied by the Time of Flight Method , 1999 .

[22]  T. Tansley,et al.  Variable range hopping in polypyrrole films of a range of conductivities and preparation methods , 1992 .

[23]  Tian-An Chen,et al.  Regiocontrolled Synthesis of Poly(3-alkylthiophenes) Mediated by Rieke Zinc: Their Characterization and Solid-State Properties , 1995 .

[24]  Salmon,et al.  ESR study of electrochemical doping in the conducting polymer polypyrrole. , 1985, Physical review letters.

[25]  B. Liedberg,et al.  Thermal undoping in poly(3-alkylthiophenes) , 1988 .

[26]  I. A. Hümmelgen,et al.  Charge injection and transport in electrochemical films of poly(3-hexylthiophene) , 2002 .

[27]  S. S. Mitra,et al.  Evaluation of Mott's Parameters for Hopping Conduction in Amorphous Ge, Si, and Se-Si , 1973 .

[28]  R. D. Mccullough,et al.  Improved electroluminescence performance of poly (3-alkylthiophenes) having a high head-to-tail (HT) ratio , 1996 .

[29]  W. Mao,et al.  Micromorphology and electrical property of the HCl-doped and DBSA-doped polyanilines , 2004 .

[30]  Magnetic-field-assisted assembly of metal/polymer/metal junction sensors , 2004 .

[31]  T. Hayakawa,et al.  Head‐to‐tail regioregularity of poly(3‐hexylthiophene) in oxidative coupling polymerization with FeCl3 , 1999 .

[32]  Ping Liu,et al.  High-performance semiconducting polythiophenes for organic thin-film transistors. , 2004, Journal of the American Chemical Society.

[33]  Donal D. C. Bradley,et al.  Ohmic hole injection in poly(9,9-dioctylfluorene) polymer light-emitting diodes , 2003 .

[34]  A. Pron,et al.  Optical studies of regioregular poly(3-octylthiophene)s under pressure , 1998 .

[35]  Vikram Kumar,et al.  Structure–conductivity correlation in ferric chloride-doped poly(3-hexylthiophene) , 2006 .

[36]  Richard D. McCullough,et al.  Enhanced electrical conductivity in regioselectively synthesized poly(3-alkylthiophenes) , 1992 .

[37]  R. Singh,et al.  Correlation between electron spin resonance and dc conductivity data of polypyrrole, poly(N-methyl pyrrole-pyrrole), and poly(N-methyl pyrrole) , 1997 .

[38]  S. Hotta,et al.  Infrared dichroic studies of polythiophenes , 1989 .

[39]  J. Roncali.  Conjugated poly(thiophenes): synthesis, functionalization, and applications , 1992 .

[40]  R. L. Elsenbaumer,et al.  Handbook of conducting polymers , 1986 .