Development of Human Posture Simulation Method for Assessing Posture Angles and Spinal Loads

Video-based posture analysis employing a biomechanical model is gaining a growing popularity for ergonomic assessments. A human posture simulation method of estimating multiple body postural angles and spinal loads from a video record was developed to expedite ergonomic assessments. The method was evaluated by a repeated measures study design with three trunk flexion levels, two lift asymmetry levels, three viewing angles and three trial repetitions as experimental factors. The study comprised two phases evaluating the accuracy of simulating self and other people's lifting posture via a proxy of a computer-generated humanoid. The mean values of the accuracy of simulating self and humanoid postures were 12° and 15°, respectively. The repeatability of the method for the same lifting condition was excellent (~2°). The least simulation error was associated with side viewing angle. The estimated back compressive force and moment, calculated by a three dimensional biomechanical model, exhibited a range of 5% underestimation. The posture simulation method enables researchers to simultaneously quantify body posture angles and spinal loading variables with accuracy and precision comparable to on-screen posture matching methods.

[1]  Y Liu,et al.  Perception and visualization of human posture information for computer-aided ergonomic analysis. , 1997, Ergonomics.

[2]  P Spielholz,et al.  Two posture analysis approaches and their application in a modified Rapid Upper Limb Assessment evaluation , 2007, Ergonomics.

[3]  Steven A Lavender,et al.  Quantitative biomechanical workplace exposure measures: distribution centers. , 2010, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[4]  L. Punnett,et al.  Work-related musculoskeletal disorders: the epidemiologic evidence and the debate. , 2004, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[5]  W. E. Hoogendoorn,et al.  Physical load during work and leisure time as risk factors for back pain. , 1999, Scandinavian journal of work, environment & health.

[6]  P. Buckle,et al.  Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. , 1999, Ergonomics.

[7]  S. Kumar,et al.  Cumulative Load as a Risk Factor for Back Pain , 1990, Spine.

[8]  E. Vieira,et al.  Risk factors for work-related musculoskeletal disorders: A systematic review of recent longitudinal studies. , 2009, American journal of industrial medicine.

[9]  Don B. Chaffin,et al.  BIOMECHANICAL COMPUTERIZED SIMULATION OF HUMAN STRENGTH. , 1974 .

[10]  Alwin Luttmann,et al.  Evaluation and assessment of lumbar load during total shifts for occupational manual materials handling jobs within the Dortmund Lumbar Load Study – DOLLY , 2000 .

[11]  Barbara Silverstein,et al.  Interrater Reliability of Posture Observations , 2009, Hum. Factors.

[12]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[13]  William S Marras,et al.  Effect of torso flexion on the lumbar torso extensor muscle sagittal plane moment arms. , 2003, The spine journal : official journal of the North American Spine Society.

[14]  Brian D Lowe,et al.  Accuracy and validity of observational estimates of wrist and forearm posture , 2004, Ergonomics.

[15]  Don B. Chaffin,et al.  A Biomechanical Model for Analysis of Symmetric Sagittal Plane Lifting , 1970 .

[16]  W S Marras,et al.  Biomechanical risk factors for occupationally related low back disorders. , 1995, Ergonomics.

[17]  Thomas J Armstrong,et al.  The effect of viewing angle on wrist posture estimation from photographic images using novice raters. , 2011, Applied ergonomics.

[18]  M. de Looze,et al.  Validation of a dynamic linked segment model to calculate joint moments in lifting. , 1992, Clinical biomechanics.

[19]  Jack P Callaghan,et al.  A validation of a posture matching approach for the determination of 3D cumulative back loads. , 2008, Applied ergonomics.

[20]  A. Burdorf,et al.  Exposure assessment of risk factors for disorders of the back in occupational epidemiology. , 1992, Scandinavian journal of work, environment & health.

[21]  Muzaffer Erig,et al.  Three-Dimensional Biomechanical Static Strength Prediction Model Sensitivity to Postural and Anthropometric Inaccuracies , 1991 .

[22]  W S Marras,et al.  The effectiveness of commonly used lifting assessment methods to identify industrial jobs associated with elevated risk of low-back disorders. , 1999, Ergonomics.

[23]  D B Chaffin,et al.  A Study of Lumbosacral Orientation under Varied Static Loads , 1986, Spine.

[24]  T.Y. Yen,et al.  A video-based system for acquiring biomechanical data synchronized with arbitrary events and activities , 1995, IEEE Transactions on Biomedical Engineering.

[25]  T M Nelson,et al.  Engineering of traffic markers to satisfy requirements of perceptual space. , 1972, Ergonomics.

[26]  T R Waters,et al.  Methods for assessing the physical demands of manual lifting: a review and case study from warehousing. , 1998, American Industrial Hygiene Association journal.

[27]  L Punnett,et al.  Evaluation of interrater reliability for posture observations in a field study. , 1999, Applied ergonomics.

[28]  Arun Garg,et al.  Applications of biomechanics for prevention of work-related musculoskeletal disorders , 2009, Ergonomics.

[29]  D B Chaffin,et al.  A computerized biomechanical model-development of and use in studying gross body actions. , 1969, Journal of biomechanics.

[30]  Don B. Chaffin,et al.  Development of Computerized Human Static Strength Simulation Model for Job Design , 1997 .

[31]  W. E. Hoogendoorn,et al.  Flexion and Rotation of the Trunk and Lifting at Work Are Risk Factors for Low Back Pain: Results of a Prospective Cohort Study , 2000, Spine.

[32]  A M Genaidy,et al.  Can visual perception be used to estimate body part angles? , 1993, Ergonomics.

[33]  Arun Garg,et al.  Validation of Revised NIOSH Lifting Equation and 3D SSP Model to Predict Risk of Work-Related Low Back Pain , 2010 .

[34]  W M Keyserling.  A computer-aided system to evaluate postural stress in the workplace. , 1986, American Industrial Hygiene Association journal.

[35]  J P Callaghan,et al.  An evaluation of predictive methods for estimating cumulative spinal loading , 2001, Ergonomics.

[36]  Anil Mital,et al.  Kinetic analysis of manual lifting activities: Part I—Development of a three-dimensional computer model , 1986 .

[37]  Svend Erik Mathiassen,et al.  Systematic evaluation of observational methods assessing biomechanical exposures at work. , 2010, Scandinavian journal of work, environment & health.

[38]  Thomas R. Waters,et al.  Human posture simulation to assess cumulative spinal load due to manual lifting. Part I: methods , 2011 .

[39]  W. M. Keyserling,et al.  Back disorders and nonneutral trunk postures of automobile assembly workers. , 1991, Scandinavian journal of work, environment & health.

[40]  Thomas R. Waters,et al.  Human posture simulation to assess cumulative spinal load due to manual lifting. Part II: accuracy and precision , 2011 .

[41]  Xu Xu,et al.  The Validity and Interrater Reliability of Video-Based Posture Observation During Asymmetric Lifting Tasks , 2011, Hum. Factors.

[42]  G B Andersson,et al.  Comparison of five methods used to determine low back disorder risk in a manufacturing environment. , 1999, Spine.

[43]  W S Marras,et al.  A literature review of low back disorder surveillance measures and risk factors. , 1997, Clinical biomechanics.

[44]  I. Kingma,et al.  Validation of a full body 3-D dynamic linked segment model , 1996 .