Thermal–Electromagnetic Analysis for Driving Cycles of Embedded Flux-Switching Permanent-Magnet Motors
暂无分享,去创建一个
Mohamed Gabsi | Emmanuel Hoang | Michel Lecrivain | Javier Ojeda | Guangjin Li | M. Gabsi | M. Lecrivain | E. Hoang | J. Ojeda | G. Li
[1] D. Rodger,et al. Coupled electromagnetic-thermal modeling of electrical machines , 2003 .
[2] M Gabsi,et al. 3-D thermal model of an hybrid excitation flux switching synchronous machine using a 2-D FE method software , 2010, SPEEDAM 2010.
[3] Janne Nerg,et al. Thermal Analysis of Radial-Flux Electrical Machines With a High Power Density , 2008, IEEE Transactions on Industrial Electronics.
[4] Chunhua Liu,et al. Efficiency Optimization of a Permanent-Magnet Hybrid Brushless Machine Using DC Field Current Control , 2009, IEEE Transactions on Magnetics.
[5] David G. Dorrell. Combined Thermal and Electromagnetic Analysis of Permanent-Magnet and Induction Machines to Aid Calculation , 2008, IEEE Transactions on Industrial Electronics.
[6] I. Husain,et al. Design and performance analysis of a switched reluctance motor for low duty cycle operation , 2005, IEEE Transactions on Industry Applications.
[7] T.M. Jahns,et al. Thermal analysis of multibarrier interior PM synchronous Machine using lumped parameter model , 2004, IEEE Transactions on Energy Conversion.
[8] G. Taylor. Stability of a Viscous Liquid Contained between Two Rotating Cylinders , 1923 .
[9] D.M. Ionel,et al. Computation of Core Losses in Electrical Machines Using Improved Models for Laminated Steel , 2006, IEEE Transactions on Industry Applications.
[10] M. Gabsi,et al. Fault diagnosis using vibration measurements of a Flux-Switching permanent magnet motor , 2010, 2010 IEEE International Symposium on Industrial Electronics.
[11] Babak Nahid-Mobarakeh,et al. Study of Different Architectures of Fault Tolerant Actuator Using a Double-Star PM Motor , 2008, 2008 IEEE Industry Applications Society Annual Meeting.
[12] Juan A. Tapia,et al. Heat Transfer and Thermal Design of Finned Frames for TEFC Variable Speed Motors , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.
[13] Sang-Yong Jung,et al. Harmonic Iron Loss Analysis of Electrical Machines for High-Speed Operation Considering Driving Condition , 2009, IEEE Transactions on Magnetics.
[14] Z.Q. Zhu,et al. Comparison of PM brushless motors, having either all teeth or alternate teeth wound , 2006, IEEE Transactions on Energy Conversion.
[15] E. Hoang,et al. A new structure of a switching flux synchronous polyphased machine with hybrid excitation , 2007, 2007 European Conference on Power Electronics and Applications.
[16] Hamid Ben Ahmed,et al. Switching flux permanent magnet polyphased synchronous machines , 1997 .
[17] D. Howe,et al. Starting Torque of Single-Phase Flux-Switching Permanent Magnet Motors , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.
[18] Zi-Qiang Zhu,et al. Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.
[19] D. Howe,et al. Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.
[20] Juan A. Tapia,et al. Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors , 2008, IEEE Transactions on Industrial Electronics.
[21] Babak Nahid-Mobarakeh,et al. Fault Tolerant and Minimum Loss Control of Double-Star Synchronous Machines Under Open Phase Conditions , 2008, IEEE Transactions on Industrial Electronics.
[22] Nicola Bianchi,et al. A Coupled Thermal–Electromagnetic Analysis for a Rapid and Accurate Prediction of IM Performance , 2008, IEEE Transactions on Industrial Electronics.
[23] Andrea Cavagnino,et al. Evolution and Modern Approaches for Thermal Analysis of Electrical Machines , 2009, IEEE Transactions on Industrial Electronics.
[24] P. Lagonotte,et al. Thermal modeling of an induction machine through the association of two numerical approaches , 2006, IEEE Transactions on Energy Conversion.
[25] N. Sadowski,et al. Evaluation and analysis of iron losses in electrical machines using the rain-flow method , 2000 .
[26] Z. Zhu,et al. Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.
[27] Z.Q. Zhu,et al. Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet Motor , 2008, IEEE Transactions on Energy Conversion.
[28] Stephen J. Pickering,et al. Improved Cooling in the End Region of a Strip-Wound Totally Enclosed Fan-Cooled Induction Electric Machine , 2008, IEEE Transactions on Industrial Electronics.
[29] R. Arumugam,et al. Analysis and characterization of switched reluctance motors: Part II. Flow, thermal, and vibration analyses , 2005, IEEE Transactions on Magnetics.