Effect of injection pressure on the combustion, performance and emission characteristics of a biodiesel engine with cerium oxide nanoparticle additive

[1]  Kexiang Wei,et al.  Experimental investigation on performance and economy characteristics of a diesel engine with variable nozzle turbocharger and its application in urban bus , 2019, Energy Conversion and Management.

[2]  K. Wei,et al.  Catastrophic analysis on the stability of a large dish solar thermal power generation system with wind-induced vibration , 2019, Solar Energy.

[3]  Wen Cao,et al.  Effects analysis on the gasification kinetic characteristics of food waste in supercritical water , 2019, Fuel.

[4]  J. E,et al.  A review of studies using graphenes in energy conversion, energy storage and heat transfer development , 2019, Energy Conversion and Management.

[5]  M. Yeşilyurt.  The effects of the fuel injection pressure on the performance and emission characteristics of a diesel engine fuelled with waste cooking oil biodiesel-diesel blends , 2019, Renewable Energy.

[6]  E Jiaqiang,et al.  Performance enhancement of microwave assisted regeneration in a wall-flow diesel particulate filter based on field synergy theory , 2019, Energy.

[7]  A. E. Atabani,et al.  The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO2 nanoparticles addition in diesel/biodiesel/n-butanol blends , 2018, Fuel.

[8]  Y. Devarajan,et al.  Effect of nanoparticle on emission and performance characteristics of a diesel engine fueled with cashew nut shell biodiesel , 2018, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[9]  J. E,et al.  Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle , 2018, Energy Conversion and Management.

[10]  Y. Devarajan,et al.  Influence of nano-additive on performance and emission characteristics of a diesel engine running on neat neem oil biodiesel , 2018, Environmental Science and Pollution Research.

[11]  M. E. Khan,et al.  Performance, emission and combustion characteristics of an Indica diesel engine operated with Yellow Oleander (Thevetia peruviana) oil biodiesel produced through hydrodynamic cavitation method , 2018 .

[12]  E Jiaqiang,et al.  Investigation on the applicability for reaction rates adjustment of the optimized biodiesel skeletal mechanism , 2018 .

[13]  E Jiaqiang,et al.  Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends , 2018 .

[14]  Hao Zhu,et al.  Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review , 2017 .

[15]  P. Dinesha,et al.  Influence of nanoparticles on the performance and emission characteristics of a biodiesel fuelled engine: An experimental analysis , 2017 .

[16]  Y.V.V. Satyanarayana Murthy,et al.  Effect of a zinc oxide nanoparticle fuel additive on the emission reduction of a hydrogen dual-fuelled engine with jatropha methyl ester biodiesel blends , 2016 .

[17]  Wenming Yang,et al.  Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled diesel engine , 2016 .

[18]  A. Élango,et al.  Diesel engine performance and emission analysis using canola oil methyl ester with the nano sized zinc oxide particles , 2014 .

[19]  V. Sajith,et al.  Diesel Engine Emission Reduction Using Catalytic Nanoparticles: An Experimental Investigation , 2013 .

[20]  G. R. Kannan,et al.  Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel , 2011 .

[21]  D. Ganesh,et al.  Effect of nano-fuel additive on emission reduction in a biodiesel fuelled CI engine , 2011, 2011 International Conference on Electrical and Control Engineering.

[22]  Hao Chen,et al.  Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine. , 2011 .

[23]  A. Koca,et al.  Comparison of performance and emissions of diesel fuel, rapeseed and soybean oil methyl esters injected at different pressures , 2010 .

[24]  N. S. Rathore,et al.  Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester , 2010 .

[25]  L. Das,et al.  A comparative evaluation of compression ignition engine characteristics using methyl and ethyl esters of Karanja oil , 2009 .

[26]  G. Nagarajan,et al.  Effect of injection pressure on performance, emission and combustion characteristics of high linolenic linseed oil methyl ester in a DI diesel engine , 2009 .

[27]  R. Velraj,et al.  Performance and exhaust emission characteristics of a CI engine fueled with Pongamia pinnata methyl ester (PPME) and its blends with diesel , 2008 .

[28]  Avinash Kumar Agarwal,et al.  Performance evaluation of a vegetable oil fuelled compression ignition engine , 2008 .

[29]  Rosli Abu Bakar,et al.  Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment , 2008 .

[30]  Bai-Fu Lin,et al.  Aqueous Aluminum Nanofluid Combustion in Diesel Fuel , 2008 .

[31]  Dimitrios C. Rakopoulos,et al.  Comparative performance and emissions study of a direct injection Diesel engine using blends of Diesel fuel with vegetable oils or bio-diesels of various origins , 2006 .

[32]  A. Ramesh,et al.  Parametric studies for improving the performance of a Jatropha oil-fuelled compression ignition engine , 2006 .

[33]  S. Jayaraj,et al.  Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil , 2005 .

[34]  Konstantinos Boulouchos,et al.  Influence of water-diesel fuel emulsions and EGR on combustion and exhaust emissions of heavy duty DI-diesel engines equipped with common-rail injection system , 2003 .

[35]  Avinash Kumar Agarwal,et al.  Biodiesel Development and Characterization for Use as a Fuel in Compression Ignition Engines , 2001 .

[36]  G. Vaitilingom,et al.  Interest of combining an additive with diesel–ethanol blends for use in diesel engines , 2001 .

[37]  W. J. D. Annand,et al.  Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines , 1963 .

[38]  Senthil Ramalingam,et al.  Performance improvement and exhaust emissions reduction in biodiesel operated diesel engine through the use of operating parameters and catalytic converter: A review , 2018 .

[39]  P. Dinesha,et al.  A study of the effect of injection pressure on the combustion, performance, and emission characteristics of cardanol biofuel blend fuelled compression ignition engine , 2015 .

[40]  Meisam Tabatabaei,et al.  A novel soluble nano-catalysts in diesel–biodiesel fuel blends to improve diesel engines performance and reduce exhaust emissions , 2015 .

[41]  M. Gürü,et al.  Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine , 2011 .

[42]  Abul Kalam Hossain,et al.  Plant oils as fuels for compression ignition engines: a technical review and life-cycle analysis , 2010 .

[43]  V. Sajith,et al.  Experimental Investigations on the Effects of Cerium Oxide Nanoparticle Fuel Additives on Biodiesel , 2010 .

[44]  M. Udayakumar,et al.  EFFECTS OF CERIUM OXIDE NANOPARTICLE ADDITION IN DIESEL AND DIESEL-BIODIESEL-ETHANOL BLENDS ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A CI ENGINE , 2009 .

[45]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .