Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology

[1]  A. K. Sood,et al.  Parametric appraisal of mechanical property of fused deposition modelling processed parts , 2010 .

[2]  V. Kovan,et al.  Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints , 2017 .

[3]  M. Meboldt,et al.  Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing , 2017 .

[4]  Amy M. Peterson.  Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective , 2019, Additive Manufacturing.

[5]  Maf Rafie,et al.  Enhanced mechanical properties of plasticized polylactic acid filament for fused deposition modelling: Effect of in situ heat treatment , 2020 .

[6]  D. Rosen,et al.  Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method , 2018, Additive Manufacturing.

[7]  D. Bhattacharyya,et al.  Optimisation of hybridisation effect in graphene reinforced polymer nanocomposites , 2018 .

[8]  Lixin Wu,et al.  A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling , 2016 .

[9]  Luiz Fernando C. S. Durão,et al.  Optimizing additive manufacturing parameters for the fused deposition modeling technology using a design of experiments , 2019, Progress in Additive Manufacturing.

[10]  David W. Rosen,et al.  Fast scanning calorimetry for semicrystalline polymers in fused deposition modeling , 2019, Polymer.

[11]  Ji Zhao,et al.  Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties , 2018, Polymers.

[12]  C. Hwang,et al.  Annealing effects in poly(phenylene sulfide) as observed by dynamic mechanical analysis , 1994 .

[13]  Anoop Kumar Sood,et al.  Experimental investigation and empirical modelling of FDM process for compressive strength improvement , 2012 .

[14]  H. Akil,et al.  Optimization on wear performance of UHMWPE composites using response surface methodology , 2015 .

[15]  K. Nemade,et al.  Polyphenylene sulfide (PPS): state of the art and applications , 2013 .

[16]  Ala Qattawi,et al.  Design Consideration for Additive Manufacturing: Fused Deposition Modelling , 2017 .

[17]  Tomoyoshi Koizumi,et al.  Plane strain fracture toughness of polyphenylene sulfide , 1998 .

[18]  T. Sınmazçelik,et al.  Influence of Annealing on the Performance of Short Glass Fiber-reinforced Polyphenylene Sulfide (PPS) Composites , 2005 .

[19]  S. Arunachalam,et al.  Critical parameters influencing the quality of prototypes in fused deposition modelling , 2001 .

[20]  Alireza Ashori,et al.  Optimization of mechanical properties of polypropylene/talc/graphene composites using response surface methodology , 2016 .

[21]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[22]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[23]  J. A. Travieso-Rodriguez,et al.  Fatigue performance of fused filament fabrication PLA specimens , 2018 .

[24]  L. Taleb,et al.  Influence of temperature on the behavior of carbon fiber fabrics reinforced PPS laminates , 2009 .

[25]  N. Ayrilmis,et al.  Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials , 2019, The International Journal of Advanced Manufacturing Technology.

[26]  J. E. Mark,et al.  Physical properties of polymers handbook , 2007 .

[27]  S. Kuo,et al.  Temperature-, pH- and CO2-Sensitive Poly(N-isopropylacryl amide-co-acrylic acid) Copolymers with High Glass Transition Temperatures , 2016, Polymers.

[28]  T. Long,et al.  Powder bed fusion of poly(phenylene sulfide) at bed temperatures significantly below melting , 2019, Additive Manufacturing.

[29]  Joshua M. Pearce,et al.  Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions , 2014 .

[30]  Hui Wang,et al.  Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties , 2017 .

[31]  Yuan Hu,et al.  Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method , 2017 .

[32]  Chuanzhen Huang,et al.  Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK , 2019, Journal of Materials Processing Technology.

[33]  N. Ayrilmis,et al.  Effect of layer thickness on surface properties of 3D printed materials produced from wood flour/PLA filament , 2018, Polymer Testing.

[34]  J. Coey.  Permanent magnets: Plugging the gap , 2012 .

[35]  J. Fitoussi,et al.  Multiscale thermal study of virgin and aged polyphenylene sulfide reinforced by glass fiber , 2020 .

[36]  Xiaoyong Tian,et al.  Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material , 2017 .

[37]  Huamin Zhou,et al.  Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts , 2019, Mechanics of Materials.

[38]  H. N. Beck,et al.  Solubility characteristics of poly(etheretherketone) and poly(phenylene sulfide) , 1992 .

[39]  F. Senatov,et al.  Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds. , 2016, Journal of the mechanical behavior of biomedical materials.

[40]  M. K. Abdullah,et al.  Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding , 2019, Composites Part B: Engineering.

[41]  Ali P. Gordon,et al.  Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives , 2015, JOM.

[42]  Jill Z. Manapat,et al.  High performance polymer nanocomposites for additive manufacturing applications , 2016 .

[43]  Yuchuan Cheng,et al.  Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling , 2019 .

[44]  B. H. Lee,et al.  Optimization of rapid prototyping parameters for production of flexible ABS object , 2005 .

[45]  Jaroslaw Kotlinski,et al.  Mechanical properties of commercial rapid prototyping materials , 2014 .

[46]  Ismail Durgun,et al.  Experimental investigation of FDM process for improvement of mechanical properties and production cost , 2014 .