A review of giant magnetostrictive injector (GMI)

Abstract Giant magnetostrictive material is a kind of excellent engineering material for its large magnetostriction, fast response speed and high energy density. And giant magnetostrictive injector which employs giant magnetostrictive material driving an electronic controlled injector may be one new promising injector. With more adjustable injection rate, giant magnetostrictive injector can promote energy utilization and reduce pollution emission. This paper provides a detailed overview of the research status of the giant magnetostrictive injector. Some important background information as the properties of giant magnetostrictive material, designing methods of giant magnetostrictive actuator and working circumstances of an electronic controlled injector are introduced firstly. Then the structure design, physical model, numerical simulation and power driver design for the giant magnetostrictive injector are reviewed especially. The summaries may support much useful information for the researchers of giant magnetostrictive injector. Furthermore, some general techniques like bias field utilizing skill, fast driving and simple modeling methods etc. are available to more research fields beyond the limitations of giant magnetostrictive injector.

[1]  Gürsel Alici,et al.  A methodology to establish a hysteresis model for trilayer conducting polymer actuators , 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[2]  Dehua Yang,et al.  Giant magnetostrictive clamping mechanism for heavy-load and precise positioning linear inchworm motors , 2011 .

[3]  Brian James Kalina.  Numerical study of effects of high exhaust gas recirculation and energy recovery system on diesel engine performance , 2009 .

[4]  Y. Wen.  Method for Random Vibration of Hysteretic Systems , 1976 .

[5]  Xiong Qing-hui.  Design and Optimization of Structure Parameters of Control Plunger Couple in Electronically Controlled Injector , 2012 .

[6]  Cheng Yong-ke.  Simulate and test fuel injection system of single-cylinder diesel engine , 2010 .

[7]  Ciro Visone,et al.  Identification and compensation of Preisach hysteresis models for magnetostrictive actuators , 2001 .

[8]  K. Arai,et al.  Theory of giant ΔE effect in magnetostrictive amorphous ribbons , 1977 .

[9]  Federico Millo,et al.  Numerical and experimental assessment of a solenoid common-rail injector operation with advanced injection strategies , 2016 .

[10]  Hongguang Li,et al.  Dynamic modeling and adaptive vibration control study for giant magnetostrictive actuators , 2013 .

[11]  Nouicer Abdelmadjid,et al.  Neural network-DFT based model for magnetostrictive hysteresis , 2011 .

[12]  Luc Dupré,et al.  Modeling of quasistatic magnetic hysteresis with feed-forward neural networks , 2001 .

[13]  Zhaoshu Yang,et al.  Modification and Numerical Method for the Jiles-Atherton Hysteresis Model , 2017 .

[14]  Dacheng Gong.  Nonlinear Preisach Model and High Order Hystersis Modeling for Giant Magnetostrictive Actuator , 2009 .

[15]  Su Han-song.  Design and Manufacture of Giant Magnetostrictive Power Supply , 2011 .

[16]  A. E. Clark,et al.  Magnetostrictive Rare Earth-Fe2 Compounds , 1988 .

[17]  A. Olabi,et al.  Design and application of magnetostrictive materials , 2008 .

[18]  C. Zhou,et al.  The principle and physical models of novel jetting dispenser with giant magnetostrictive and a magnifier , 2015, Scientific Reports.

[19]  Choongsik Bae,et al.  Mathematical model of diesel fuel injection equipment incorporating non-linear fuel injection , 2002 .

[20]  Young-Jin Park,et al.  Structural vibration control using linear magnetostrictive actuators , 2007 .

[21]  D. H. Gibson.  A Flexible Fuel Injection Simulation , 1986 .

[22]  Mauro Zucca,et al.  Analysis of a magnetostrictive actuator equipped for the electromagnetic and mechanical dynamic characterization , 2007 .

[23]  D. Jiles,et al.  Ferromagnetic hysteresis , 1983 .

[24]  Fu Long.  The Study on Driving Power of Giant Magnetostrictive Actuator , 2002 .

[25]  Zhaoshu Yang,et al.  Displacement model and driving voltage optimization for a giant magnetostrictive actuator used on a high-pressure common-rail injector , 2016 .

[26]  Loucas S. Louca,et al.  Bond Graph Based Modal Representations And Model Reduction Of Lumped Parameter Systems , 2006 .

[27]  D. Jiles.  Frequency dependence of hysteresis curves in conducting magnetic materials , 1994 .

[28]  J. Krammer,et al.  Coupled 1D-3D Simulation of Common Rail Injector Flow Using AVL HYDSIM and FIRE , 2009 .

[29]  Zhongbo He,et al.  Design and model for the giant magnetostrictive actuator used on an electronic controlled injector , 2017 .

[30]  Zhenyuan Jia,et al.  A novel magnetostrictive static force sensor based on the giant magnetostrictive material , 2011 .

[31]  Xu Cang-su.  Design of Control Circuits of Electronic Fuel Injection for Diesel Spray Characteristics , 2011 .

[32]  丁凡,et al.  Study on driving magnetic field and performance of GMA for nozzle flapper servo valve , 2007 .

[33]  G. Engdahl.  Handbook of Giant Magnetostrictive Materials , 1999 .

[34]  John S. Baras,et al.  Modeling and control of hysteresis in magnetostrictive actuators , 2004, Autom..

[35]  Feng Jiang,et al.  Simulation Research on Fuel Injection System of 16V265H Diesel Engine Introduced from U.S. , 2010, 2010 International Conference on E-Product E-Service and E-Entertainment.

[36]  Ferruccio Resta,et al.  A low frequency magnetostrictive inertial actuator for vibration control , 2012 .

[37]  J. Gullaksen.  Simulation of Diesel Fuel Injection Dynamics Using MATLAB , 2004 .

[38]  Cheng Yao-dong.  The Design of High-Speed Powerful Solenoid Based on Giant Magnetostrictive Material and Analysis of Its Control Method , 2000 .

[39]  D. Jiles,et al.  Theory of ferromagnetic hysteresis , 1986 .

[40]  David L. Atherton,et al.  Effects of stress on magnetization , 1986 .

[41]  R. Kadoli,et al.  Magneto-mechanical Coupled Magnetostriction Model for Terfenol-D Actuator under Step Input☆ , 2014 .

[42]  Li Chuan,et al.  A review of the magnetomechanical modeling of magnetostriction materials , 2013 .

[43]  Zhao Zhangrong.  Study on Great Power Constant Current Power Amplifier of GMA Based on General Operational Amplifier , 2008 .

[44]  Mouloud Feliachi,et al.  Modified Jiles―Atherton model and parameters identification using false position method , 2010 .

[45]  Pan Xiao-hong.  Modeling and parameter identification of hysteresis in giant magnetostrictive actuator based on Preisach theory , 2008 .

[46]  Young-Woo Park,et al.  Control of a magnetostrictive actuator with feedforwarding inverted hysteresis , 2004 .

[47]  Yousef Hojjat,et al.  Development of Magnetostrictive Resonant Torsional Vibrator , 2015, IEEE Transactions on Magnetics.

[48]  John E. Miesner,et al.  Magnetostrictive Motor Development , 1994 .

[49]  Li Yong.  Harmonic Analysis and Suppression for Power Drive Unit of Giant Magnetostrictive Actuator , 2012 .

[50]  Yousef Hojjat,et al.  Effect of magnetic field on mechanical properties in Permendur , 2016 .

[51]  Zhao Hui.  Modeling and simulation of common rail fuel system of electronically controlled marine diesel engine , 2013 .

[52]  X. Guangming,et al.  Revised reluctance model of the axial magnetic field intensity within giant magnetostrictive rod , 2017 .

[53]  Mauro Zucca,et al.  A simplified vibration compensation through magnetostrictive actuators , 2015 .

[54]  S. Karunanidhi,et al.  Mathematical modelling and experimental characterization of a high dynamic servo valve integrated with piezoelectric actuator , 2010 .

[55]  Dong Jian,et al.  Design of DME-Diesel Fuel Supply System for Non-Gasification , 2013 .

[57]  Lei Wang,et al.  Vibration Energy Harvesting by Magnetostrictive Material for Powering Wireless Sensors , 2008 .

[58]  S. Karunanidhi,et al.  Design, analysis and simulation of magnetostrictive actuator and its application to high dynamic servo valve , 2010 .

[59]  Young-Woo Park,et al.  Ejection feasibility of high viscosity fluid with magnetostrictive inkjet printhead , 2015 .

[60]  Ying-ying Xue,et al.  An investigation of the performance of an electronic in-line pump system for diesel engines , 2008 .

[61]  Nelson Sadowski,et al.  Minor loops modelling with a modified Jiles–Atherton model and comparison with the Preisach model , 2008 .

[62]  G. Zhang,et al.  Study on Strategies of Anti-Wear and Leakage for Fuel Injection System of Dimethyl Ether (DME) Engine , 2012 .

[63]  Liyi Li,et al.  Design of Giant Magnetostrictive Actuator for fuel injector , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[64]  Fuzai Lv,et al.  Hysteresis model of magnetostrictive actuators and its numerical realization , 2007 .

[65]  Hayato Yoshioka,et al.  A newly developed rotary-linear motion platform with a giant magnetostrictive actuator , 2013 .

[66]  Zhenyuan Jia,et al.  Research on the constant output force control system for giant magnetostrictive actuator disturbed by external force , 2012 .

[67]  Hiroshi Eda,et al.  Ultraprecise Machine Tool Equipped with a Giant Magnetostriction Actuator — Development of New Materials, Tb x Dy 1-x , (Fe y Mn 1-y ) n , and Their Application , 1992 .

[68]  R. Szewczyk,et al.  Extended Jiles–Atherton model for modelling the magnetic characteristics of isotropic materials , 2008 .

[69]  Nigel Baker,et al.  Delphi Common Rail system with direct acting injector , 2008 .

[70]  A. G. Olabi,et al.  Computation of magnetic field in an actuator , 2008, Simul. Model. Pract. Theory.

[71]  Ferruccio Resta,et al.  A model of magnetostrictive actuators for active vibration control , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[72]  Stefan Seelecke,et al.  Free energy model for hysteresis in magnetostrictive transducers , 2003 .

[73]  Yi Zhang,et al.  A model of giant magnetostrictive actuator used in automobile engine fuel injection system , 2013 .

[74]  Charles B. Bright,et al.  Possible Very High Speed Rate Shaping Fuel Injector , 2007 .

[75]  G. Bertotti.  Dynamic generalization of the scalar Preisach model of hysteresis , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[76]  Myungchul Chung,et al.  Experimental investigation and hydraulic simulation of dynamic effects on diesel injection characteristics in indirect acting piezo-driven injector with bypass-circuit system , 2015 .

[77]  Huang Zhen.  Modeling of Time-delay in Giant Magnetostrictive Actuator and Smith Strategy , 2009 .

[78]  Guang Meng,et al.  Large stroke and nanometer-resolution giant magnetostrictive assembled actuator for driving segmented mirrors in very large astronomical telescopes , 2012 .

[79]  Saiful Amri Mazlan,et al.  Implementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection Actuation , 2008 .

[80]  L. Louca.  Power Conserving Bond Graph Based Modal Representations and Model Reduction of Lumped Parameter Systems , 2014 .

[81]  Bo Li,et al.  Fuel spray dynamic characteristics of GDI high pressure injection system , 2012 .

[82]  J. Rhyne,et al.  MAGNETOSTRICTION OF Tb SINGLE CRYSTALS , 1965 .

[83]  J. Rhyne,et al.  GIANT MAGNETOSTRICTION IN DYSPROSIUM AND HOLMIUM SINGLE CRYSTALS , 1963 .

[84]  Weng Ling.  DYNAMIC MODEL WITH HYSTERETIC NONLINEARITY FOR A GIANT MAGNETOSTRICTIVE ACTUATOR , 2003 .

[85]  R. M. Bozorth,et al.  ANOMALOUS THERMAL EXPANSION AND MAGNETOSTRICTION OF SINGLE-CRYSTAL DYSPROSIUM , 1965 .

[86]  Krzysztof Chwastek,et al.  Frequency behaviour of the modified Jiles–Atherton model , 2008 .

[87]  Charles B. Bright,et al.  Programmable Diesel Injector Transducer Test Results , 2011 .

[88]  Klaus Kuhnen,et al.  Modeling, Identification and Compensation of Complex Hysteretic Nonlinearities: A Modified Prandtl - Ishlinskii Approach , 2003, Eur. J. Control.

[89]  Fuh-Gwo Yuan,et al.  An optimal design of magnetostrictive material (MsM) based energy harvester , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[90]  Yuchuan Zhu,et al.  Development of a four-nozzle flapper servovalve driven by a giant magnetostrictive actuator , 2015, J. Syst. Control. Eng..

[91]  M. Marčič.  Computer Simulation of the Diesel Fuel Injection Nozzle , 1993 .

[92]  Mayergoyz,et al.  Mathematical models of hysteresis. , 1986, Physical review letters.

[93]  Yuansheng Chen,et al.  Tracking control of piezoelectric stack actuator using modified Prandtl–Ishlinskii model , 2013 .

[94]  Stefano Ubertini,et al.  An Integrated Experimental-Numerical Study of HSDI Diesel Injection System and Spray Dynamics , 2006 .

[95]  T.A. Baudendistel,et al.  A Novel Inverse-Magnetostrictive Force Sensor , 2007, IEEE Sensors Journal.

[96]  Shin Matsuoka,et al.  A STUDY OF FUEL INJECTION SYSTEMS IN DIESEL ENGINES , 1976 .

[97]  D. Jiles,et al.  Theory of ferromagnetic hysteresis (invited) , 1984 .

[98]  Abdul-Ghani Olabi,et al.  Design of a magnetostrictive (MS) actuator , 2008 .

[99]  Marilyn Wun-Fogle,et al.  Magnetostrictive Properties of Galfenol Alloys Under Compressive Stress , 2002 .

[100]  Ilker Kucuk,et al.  Prediction of hysteresis loop in magnetic cores using neural network and genetic algorithm , 2006 .

[101]  Zhi Juan Wang,et al.  Research of the Giant Magnetostrictive Fule Injector , 2014 .

[102]  C.D. Boley,et al.  Model and simulations of hysteresis in magnetic cores , 1989, International Magnetics Conference.

[103]  Eckhard Quandt,et al.  Giant magnetostrictive thin film materials and applications , 1997 .

[104]  J. B. Restorff,et al.  Magnetostrictive Materials and Devices , 2003 .

[105]  Han Zhang,et al.  Sparse Decomposition Based Aero-engine’s Bearing Fault Diagnosis , 2015 .

[106]  C. Hong,et al.  Application of a magnetostrictive actuator , 2013 .

[107]  Mark Elliott Staley,et al.  DEVELOPMENT OF A PROTOTYPE MAGNETOSTRICTIVE ENERGY HARVESTING DEVICE , 2005 .

[108]  Yoshihisa Yamamoto,et al.  Development of new electronically controlled fuel injection system ECD-U2 for diesel engines , 1991 .

[109]  William D. Armstrong,et al.  An incremental theory of magneto-elastic hysteresis in pseudo-cubic ferro-magnetostrictive alloys , 2003 .

[110]  G. Tardajos,et al.  High pressure physical properties of fluids used in diesel injection systems , 2000 .

[111]  Zhang Jian-yang.  Design of rare-earth magnetostrictive transducer based on DSP , 2012 .

[112]  D. Fang,et al.  Non-linear constitutive relations for magnetostrictive materials , 2003 .

[113]  Huifang Liu.  Parameter Identification of Displacement Model for Giant Magnetostrictive Actuator , 2011 .

[114]  David Jiles,et al.  Modelling the effects of eddy current losses on frequency dependent hysteresis in electrically conducting media , 1994 .

[115]  Rolf D. Reitz,et al.  Methods and Results from the Development of a 2600 Bar Diesel Fuel Injection System , 2000 .

[116]  David Jiles,et al.  Theoretical modelling of the effects of anisotropy and stress on the magnetization and magnetostriction of Tb0.3Dy0.7Fe2 , 1994 .

[117]  Daniel Thomasset,et al.  Bond graph formulation of an optimal control problem for linear time invariant systems , 2008, J. Frankl. Inst..

[118]  Kemin Zhou,et al.  Experimental characterization and modeling of stress-dependent hysteresis of a giant magnetostrictive actuator , 2013 .

[119]  G. Carman,et al.  Nonlinear Constitutive Relations for Magnetostrictive Materials with Applications to 1-D Problems , 1995 .

[120]  Lin Mingxing.  Output filter design of half bridge chopping inverter , 2012 .

[121]  Zhongbo He,et al.  Design and experimental study of a novel giant magnetostrictive actuator , 2016 .

[122]  H P Wang,et al.  High pressure common rail injection system modeling and control. , 2016, ISA transactions.

[123]  William D. Armstrong,et al.  Magnetization and magnetostriction processes in Tb(0.27−0.30)Dy(0.73−0.70)Fe(1.9−2.0) , 1997 .

[124]  R. Ben Mrad,et al.  A model for voltage-to-displacement dynamics in piezoceramic actuators subject to dynamic-voltage excitations , 2002 .

[125]  Raul Payri,et al.  Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis , 2016 .

[126]  M. Krasnosel’skiǐ,et al.  Systems with Hysteresis , 1989 .

[127]  Aihua Meng.  Modeling and Simulation of Pulsed Jet On-off Valve Based on GMA , 2009 .

[128]  Choongsik Bae,et al.  Development of cavitation and enhanced injector models for diesel fuel injection system simulation , 2002 .

[129]  J. Izydorczyk,et al.  The frequency-dependent Jiles–Atherton hysteresis model , 2015 .

[130]  Wenmei Huang,et al.  Hybrid genetic algorithms for parameter identification of a hysteresis model of magnetostrictive actuators , 2007, Neurocomputing.

[131]  Wei Xu,et al.  Flexure hinges for piezoactuator displacement amplifiers: flexibility, accuracy, and stress considerations , 1996 .

[132]  Hirohisa Tanaka,et al.  Development of a Common-Rail Proportional Injector Controlled by a Tandem Arrayed Giant-Magnetostrictive-Actuator , 2001 .

[133]  Hongguang Li,et al.  Nonlinear dynamics of a SDOF oscillator with Bouc–Wen hysteresis , 2007 .

[134]  A. Clark,et al.  Huge magnetocrystalline anisotropy in cubic rare earth-Fe2 compounds , 1972 .

[135]  Ma Zhi-xin.  A Power Supply for Giant Magnetostrictive Actuator , 2010 .

[136]  Z. Zhong,et al.  Analysis of the displacement amplification ratio of bridge-type flexure hinge , 2006 .

[137]  He Zhi-xia.  Numerical Simulation on Optimization of Diesel Nozzle , 2006 .

[138]  Chun-Yi Su,et al.  Adaptive Robust Control of Dynamic Systems with Unknown Input Hysteresis , 2003, 2003 4th International Conference on Control and Automation Proceedings.

[139]  裕久 田中,et al.  コモンレール用比例制御形電子燃料噴射弁の特性に関する研究 : 第1報, 電磁パイロット弁による制御特性 , 2000 .