Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit

A transient heat transfer phenomenon during charging and discharging of the shell-and-tube latent thermal energy storage system has been analysed in this paper. The mathematical model, regarding the conjugate problem of transient forced convection and solid-liquid phase change heat transfer based on the enthalpy formulation, has been presented. A fully implicit two-dimensional control volume FORTRAN computer code has been developed for solving governing equations with initial and boundary conditions. The numerical model is validated with experimental data obtained by experimental investigations that have been performed on the test unit with technical grade paraffin as the phase change material (PCM) and water as the heat transfer fluid (HTF). Numerical predictions match the experimental results. This pointed out that the presented numerical procedure could be accurately used for transient heat transfer simulation. A series of numerical calculations have been done in order to analyse the influence of several HTF operating conditions and several geometric parameters on the heat transfer process inside the water-paraffin shell-and-tube latent thermal energy storage (LTES) unit. Numerical results, which could be used for operating conditions and geometry optimization, provide guidelines for the design of the latent thermal energy storage system.

[1]  B. Zivkovic,et al.  An analysis of isothermal phase change of phase change material within rectangular and cylindrical containers , 2001 .

[2]  M. Conti,et al.  Phase change thermal storage : transient behaviour analysis of a solar receiver/storage module using the enthalpy method , 1993 .

[3]  Yuwen Zhang,et al.  Semi-analytical solution of thermal energy storage system with conjugate laminar forced convection , 1996 .

[4]  M. Conti,et al.  Latent heat thermal storage for solar dynamic power generation , 1993 .

[5]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[6]  Won Soon Chang,et al.  A numerical analysis of Stefan problems for generalized multi-dimensional phase-change structures using the enthalpy transforming model , 1989 .

[7]  M. Dimaano,et al.  Performance investigation of the capric and lauric acid mixture as latent heat energy storage for a cooling system , 2002 .

[8]  Bernard Franković,et al.  A Study of Transient Phase-Change Heat Transfer During Charging and Discharging of the Latent Thermal Energy Storage Unit , 2004 .

[9]  A. Sari,et al.  Thermal Performance of a Eutectic Mixture of Lauric and Stearic Acids as PCM Encapsulated in the Annulus of Two Concentric Pipes , 2002 .

[10]  M. Lacroix.  Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube , 1993 .

[11]  R. Velraj,et al.  Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit , 1997 .

[12]  A. Sari,et al.  Thermal energy storage system using stearic acid as a phase change material , 2001 .

[13]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[14]  M. Conti,et al.  Transient behaviour analysis of a latent heat thermal storage module , 1993 .

[15]  Kamal Abdel Radi Ismail,et al.  Performance of a thermal storage system of the vertical tube type , 2000 .

[16]  L. W. Hunter,et al.  The enthalpy method for heat conduction problems with moving boundaries , 1989 .

[17]  M. Lacroix.  Numerical simulation of a shell-and-tube latent heat thermal energy storage unit , 1993 .

[18]  Anica Trp,et al.  An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit , 2005 .

[19]  M. Cross,et al.  An enthalpy method for convection/diffusion phase change , 1987 .

[20]  A. Hasan.  Phase change material energy storage system employing palmitic acid , 1994 .

[21]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[22]  Mehmet Esen,et al.  Geometric design of solar-aided latent heat store depending on various parameters and phase change materials , 1998 .

[23]  A. Faghri,et al.  Performance characteristics of a thermal energy storage module - A transient PCM/forced convection conjugate analysis , 1991 .

[24]  R. Y. Tzong,et al.  An enthalpy formulation for phase change problems with a large thermal diffusivity jump across the interface , 1991 .

[25]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[26]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[27]  A. Sari.  Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications , 2003 .

[28]  Amir Faghri,et al.  A Study of Thermal Energy Storage Systems With Conjugate Turbulent Forced Convection , 1992 .