Diamond-like carbon as a buffer layer in polymeric electroluminescent device

Abstract Diamond-like carbon (DLC) layer was deposited by the Cs+ ion sputtered negative ion deposition technique between hole transport layer and indium tin oxide (ITO) anode for polymeric electroluminescent device. An acidic poly(styrene sulfonate)-doped poly(3,4-ethylene dioxythiophene):poly-(styrenesulphonic acid) (PEDOT:PSS) solution acting as a hole transporting material etches the ITO surface and the PEDOT:PSS/ITO interface is not stable. X-ray photoelectron spectroscopy and Rutherford backscattering spectrometry have been used to measure the indium contamination in the organic layers such as PEDOT:PSS and poly[2-methoxy-5-( 2′-ethyl-hexyloxy)-1,4-phenylene vinylene]. From the result, it was found that the DLC buffer layer protects ITO surface from acidic PEDOT:PSS solution and restrains the indium diffusion into organic layer. The device with the DLC layer also has electroluminescent efficiency by almost 2 times in the polymeric electroluminescent device compared with the device without diamond-like carbon layer.

[1]  S. I. Kim,et al.  Formation of polycrystalline silicon films on glass substrates at low-temperatures by a direct negative Si ion beam deposition system , 1998 .

[2]  Meiso Yokoyama,et al.  Enhanced emission in organic light-emitting diodes using Ta2O5 buffer layers , 2003 .

[3]  R. W. Gymer,et al.  Indium diffusion in model polymer light-emitting diodes , 2000 .

[4]  Zhiqiang Gao,et al.  Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer , 2002 .

[5]  Soo Jin Chua,et al.  Lithium-fluoride-modified indium tin oxide anode for enhanced carrier injection in phenyl-substituted polymer electroluminescent devices , 2001 .

[6]  S. Chua,et al.  Stabilization of electrode migration in polymer electroluminescent devices , 2002 .

[7]  O. Park,et al.  Improvement of EL efficiency in polymer light-emitting diodes by heat treatments , 2001 .

[8]  Shih-Ching Wu,et al.  The effect of solvent on the etching of ITO electrode , 2004 .

[9]  T. Klapwijk,et al.  Indium contamination from the indium–tin–oxide electrode in polymer light‐emitting diodes , 1996 .

[10]  K. Yoshino,et al.  IMPROVEMENT OF ELECTRODE/ORGANIC LAYER INTERFACES BY THE INSERTION OF MONOLAYER-LIKE ALUMINUM OXIDE FILM , 1998 .

[11]  D. Choi,et al.  Field emission characteristics of cesiated amorphous carbon films by negative carbon ion , 1999 .

[12]  Yan Zhou,et al.  Improvement of organic light-emitting diodes performance by the insertion of a Si3N4 layer , 2000 .

[13]  S. D. Vos,et al.  Chemical and thermal treatment of PEDOT:PSS thin films for use in organic light emitting diodes , 2004 .

[14]  S. Chua,et al.  Effect of organic layer combination on dark spot formation in organic light emitting devices , 2004 .