Multiband and Small Coplanar Antenna System for Wireless Handheld Devices

Multiband and small antennas are strongly demanded in current wireless handheld or portable devices that require multiband operation. Nowadays, trends are focused on exciting ground plane radiation modes in order to reduce as much as possible the volume devoted to the antenna element. This paper studies different geometries for determining which one better excites a ground plane radiation mode at different frequency regions. The results demonstrate that a non-resonant pad element attains the best tradeoff between performance and geometry complexity. A multiband antenna system featuring small coplanar pad elements is proposed for providing operation at the communication standards LTE700 (698-787 MHz), GSM850 (824-894 MHz), GSM900 (880-960 MHz), GSM1800 (1710-1880 MHz), GSM1900 (1850-1990 MHz), UMTS (1920-2170 MHz), LTE2100 (1920-2170 MHz), LTE2300 (2300-2400 MHz), LTE2500 (2500-2690 MHz) as well as at the satellite positioning systems GPS (1575 MHz), Galileo L1 (1559-1591 MHz), Glonass (1592-1609 MHz). A radiofrequency system comprising broadband matching networks is included to provide the required impedance bandwidth. Numerical results give physical insight into the behavior of the proposed planar element. A prototype is built to demonstrate the feasibility of the proposal. The proposed radiating system is appealing for the new wireless handheld devices due to its small size (153 ), planar profile, and multiband performance.

[1]  Kin‐Lu Wong,et al.  Printed Single-Strip Monopole Using a Chip Inductor for Penta-Band WWAN Operation in the Mobile Phone , 2010, IEEE Transactions on Antennas and Propagation.

[2]  Jaume Anguera Pros,et al.  A systematic method to design broadband matching networks , 2010, EuCAP 2010.

[3]  Jing Li Guo,et al.  Miniature Printed Octaband Monopole Antenna for Mobile Phones , 2010, IEEE Antennas and Wireless Propagation Letters.

[4]  Jaume Anguera,et al.  The fractal Hilbert monopole: A two‐dimensional wire , 2003 .

[5]  M.E. Bialkowski,et al.  Improvement of compact terminal antenna performance by incorporating open-end slots in ground plane , 2004, IEEE Microwave and Wireless Components Letters.

[6]  Jaume Anguera,et al.  Ground Plane Boosters as a Compact Antenna Technology for Wireless Handheld Devices , 2011, IEEE Transactions on Antennas and Propagation.

[7]  P. Lindberg,et al.  A bandwidth enhancement technique for mobile handset antennas using wavetraps , 2006, IEEE Transactions on Antennas and Propagation.

[8]  J. Anguera,et al.  Enhancing the Performance of Handset Antennas by Means of Groundplane Design , 2006, IEEE International Workshop on Antenna Technology Small Antennas and Novel Metamaterials, 2006..

[9]  R. Harrington,et al.  Theory of characteristic modes for conducting bodies , 1971 .

[10]  J. Anguera,et al.  Multiband Handset Antenna With a Parallel Excitation of PIFA and Slot Radiators , 2010, IEEE Transactions on Antennas and Propagation.

[11]  Kin-Lu Wong,et al.  Planar Antennas for Wireless Communications , 2003 .

[12]  M. Ali,et al.  Modifying the ground plane and its effect on planar inverted-F antennas (PIFAs) for mobile phone handsets , 2003, IEEE Antennas and Wireless Propagation Letters.

[13]  S.M. Ali,et al.  Compact Multiband Folded 3-D Monopole Antenna , 2009, IEEE Antennas and Wireless Propagation Letters.

[14]  A. V. D. Capelle,et al.  An impedance-matching technique for increasing the bandwidth of microstrip antennas , 1989 .

[15]  Kin‐Lu Wong,et al.  Printed Monopole Slot Antenna for Internal Multiband Mobile Phone Antenna , 2007, IEEE Transactions on Antennas and Propagation.

[16]  John C. Batchelor,et al.  Multiband printed PIFA antenna with ground plane capacitive resonator , 2004 .

[17]  Young-Bae Jung,et al.  Octaband Internal Antenna for 4G Mobile Handset , 2011, IEEE Antennas and Wireless Propagation Letters.

[18]  Kin‐Lu Wong,et al.  A low-profile planar monopole antenna for multiband operation of mobile handsets , 2003 .

[19]  O. Litschke,et al.  Integrated planar multiband antennas for personal communication handsets , 2006, IEEE Transactions on Antennas and Propagation.

[20]  W. L. Schroeder,et al.  Utilisation and tuning of the chassis modes of a handheld terminal for the design of multiband radiation characteristics , 2005 .

[21]  Kin-Lu Wong,et al.  Hexa-band internal printed slot antenna for mobile phone application , 2008 .

[22]  K. Luk,et al.  A wideband L-probe patch antenna array with wide beamwidth , 2003 .

[23]  P. Vainikainen,et al.  Resonator-based analysis of the combination of mobile handset antenna and chassis , 2002 .

[24]  M. Ribo,et al.  Multiband Handset Antenna Combining a PIFA, Slots, and Ground Plane Modes , 2009, IEEE Transactions on Antennas and Propagation.

[25]  Outi Kivekäs,et al.  Coupling element based mobile terminal antenna structures , 2006 .

[26]  S.R. Best,et al.  The inverse relationship between quality factor and bandwidth in multiple resonant antennas , 2006, 2006 IEEE Antennas and Propagation Society International Symposium.

[27]  Kin‐Lu Wong,et al.  Printed Loop Antenna With a Perpendicular Feed for Penta-Band Mobile Phone Application , 2008, IEEE Transactions on Antennas and Propagation.

[28]  B.S. Collins,et al.  A Multi-Band Hybrid Balanced Antenna , 2006, IEEE International Workshop on Antenna Technology Small Antennas and Novel Metamaterials, 2006..

[29]  M. Cabedo-Fabres,et al.  The Theory of Characteristic Modes Revisited: A Contribution to the Design of Antennas for Modern Applications , 2007, IEEE Antennas and Propagation Magazine.

[30]  A. Andujar,et al.  On the radio frequency system of ground plane booster antenna technology , 2012 .

[31]  Carles Puente,et al.  A systematic method to design single-patch broadband microstrip patch antennas , 2001 .