Mathematical Model and Advanced Control for Gas-phase Olefin Polymerization in Fluidized-bed Catalytic Reactors

In this study, the developments in modeling gas-phase catalyzed olefin polymerization fluidized-bed reactors (FBR) using Ziegler-Natta catalyst is presented. The modified mathematical model to account for mass and heat transfer between the solid particles and the surrounding gas in the emulsion phase is developed in this work to include site activation reaction. This model developed in the present study is subsequently compared with well-known models, namely, the bubble-growth, well-mixed and die constant bubble size models for porous and non porous catalyst. The results we obtained from the model was very close to the constant bubble size model, well-mixed model and bubble growth model at the beginning of the reaction but its overall behavior changed and is closer to the well-mixed model compared with the bubble growth model and constant bubble size model after half an hour of operation. Neural-network based predictive controller are implemented to control the system and compared with the conventional PID controller, giving acceptable results.

[1]  J. Macgregor,et al.  A kinetic model for industrial gas-phase ethylene copolymerization , 1990 .

[2]  Brian Roffel,et al.  Non-linear model based control of a propylene polymerization reactor , 2007 .

[3]  M. Hussain,et al.  Simulation, optimization and parametric studies of a solid catalyzed gas phase ethylene polymerization fluidized bed reactor , 2005 .

[4]  Efstratios N. Pistikopoulos,et al.  Optimal grade transition and selection of closed-loop controllers in a gas-phase olefin polymerization fluidized bed reactor , 2003 .

[5]  Costas Kiparissides,et al.  Recent developments in modeling gas-phase catalyzed olefin polymerization fluidized-bed reactors: The effect of bubble size variation on the reactor's performance , 2000 .

[6]  Neal R. Amundson,et al.  Continuous polymerization models—part II: Batch reactor polymerization , 1965 .

[7]  M. A. Latifi,et al.  Optimization and non-linear control of a batch emulsion polymerization reactor , 1999 .

[8]  Navid Mostoufi,et al.  Modeling of fluidized bed reactor of ethylene polymerization , 2004 .

[9]  Ricardo A. F. Machado,et al.  Control of batch suspension polymerization reactor , 1998 .

[10]  Victor M. Zavala,et al.  Dynamic optimization of a semi-batch reactor for polyurethane production , 2005 .

[11]  N. Mostoufi,et al.  TWO-PHASE MODELING OF A GAS PHASE POLYETHYLENE FLUIDIZED BED REACTOR , 2006 .

[12]  R. Sala,et al.  A fluid-dynamic study of a continuous polymerisation reactor , 1974 .

[13]  Neal R. Amundson,et al.  Continuous polymerization models—I: Polymerization in continuous stirred tank reactors , 1965 .

[14]  W. Ray,et al.  THE DYNAMIC BEHAVIOUR OF FLUIDIZED BED REACTORS FOR SOLID CATALYZED GAS PHASE OLEFIN POLYMERIZATION , 1985 .

[15]  S. Fomine,et al.  Diacetylene-Containing Polymers IX. Halogenation of Some Diacetylene-Containing Polyesters , 1996 .