Life cycle assessment of pyrolysis, gasification and incineration waste-to-energy technologies: Theoretical analysis and case study of commercial plants.

Municipal solid waste (MSW) pyrolysis and gasification are in development, stimulated by a more sustainable waste-to-energy (WtE) option. Since comprehensive comparisons of the existing WtE technologies are fairly rare, this study aims to conduct a life cycle assessment (LCA) using two sets of data: theoretical analysis, and case studies of large-scale commercial plants. Seven systems involving thermal conversion (pyrolysis, gasification, incineration) and energy utilization (steam cycle, gas turbine/combined cycle, internal combustion engine) are modeled. Theoretical analysis results show that pyrolysis and gasification, in particular coupled with a gas turbine/combined cycle, have the potential to lessen the environmental loadings. The benefits derive from an improved energy efficiency leading to less fossil-based energy consumption, and the reduced process emissions by syngas combustion. Comparison among the four operating plants (incineration, pyrolysis, gasification, gasification-melting) confirms a preferable performance of the gasification plant attributed to syngas cleaning. The modern incineration is superior over pyrolysis and gasification-melting at present, due to the effectiveness of modern flue gas cleaning, use of combined heat and power (CHP) cycle, and ash recycling. The sensitivity analysis highlights a crucial role of the plant efficiency and pyrolysis char land utilization. The study indicates that the heterogeneity of MSW and syngas purification technologies are the most relevant impediments for the current pyrolysis/gasification-based WtE. Potential development should incorporate into all process aspects to boost the energy efficiency, improve incoming waste quality, and achieve efficient residues management.

[1]  Toni Gladding,et al.  Review of Environmental and Health Effects of Waste Management: Municipal Solid Waste and Similar Wastes , 2004 .

[2]  Thomas H. Christensen,et al.  Life-cycle assessment (EASEWASTE) of two municipal solid waste incineration technologies in China , 2010, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[3]  U. Arena,et al.  Gasification of a solid recovered fuel in a pilot scale fluidized bed reactor , 2014 .

[4]  Hsien Hui Khoo,et al.  Life cycle impact assessment of various waste conversion technologies. , 2009, Waste management.

[5]  Umberto Arena,et al.  A life cycle assessment of environmental performances of two combustion- and gasification-based waste-to-energy technologies. , 2015, Waste management.

[6]  Raf Dewil,et al.  Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction , 2010 .

[7]  Andrew Brown,et al.  Fully integrated modelling for sustainability assessment of resource recovery from waste. , 2018, The Science of the total environment.

[8]  Bingxi Li,et al.  Thermodynamic evaluation of biomass gasification with air in autothermal gasifiers , 2011 .

[9]  Henrik Wenzel,et al.  Environmental assessment of products volume 1: Methodology, tools, and case studies in product , 1997 .

[10]  Dino Musmarra,et al.  Biomass gasification technology： The state of the art overview , 2016 .

[11]  M Morris,et al.  Energy recovery from solid waste fuels using advanced gasification technology , 1998 .

[12]  Roland Hischier,et al.  Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant. , 2015, The Science of the total environment.

[13]  H. Matsui,et al.  Development of waste gasification and gas reforming system for municipal solid waste (MSW) , 2012 .

[14]  Paola Lettieri,et al.  Techno-economic performance of energy-from-waste fluidized bed combustion and gasification processes in the UK context , 2009 .

[15]  Stefano Consonni,et al.  Waste gasification vs. conventional Waste-to-Energy: a comparative evaluation of two commercial technologies. , 2012, Waste management.

[16]  Marie K. Harder,et al.  A critical review of developments in the pyrolysis of automotive shredder residue , 2007 .

[17]  Andrea Gasparella,et al.  Energy and environmental analysis of an innovative system based on municipal solid waste (MSW) pyrolysis and combined cycle , 2008 .

[18]  N. Tanigaki,et al.  Co-gasification of municipal solid waste and material recovery in a large-scale gasification and melting system. , 2012, Waste management.

[19]  R. Shih,et al.  Benefit assessment of cost, energy, and environment for biomass pyrolysis oil , 2013 .

[20]  Michael Zwicky Hauschild,et al.  Spatial differentiation in life cycle impact assessment - the EDIP-2003 methodology. Guidelines from the Danish EPA , 2004 .

[21]  E. Brizio,et al.  Environmental Performances and Energy Efficiency for MSW Gasification Treatment , 2015 .

[22]  Fabrizio Passarini,et al.  Environmental impacts of waste incineration in a regional system (Emilia Romagna, Italy) evaluated from a life cycle perspective. , 2008, Journal of hazardous materials.

[23]  Bo Leckner,et al.  Process aspects in combustion and gasification Waste-to-Energy (WtE) units. , 2015, Waste management.

[24]  Panagiotis Grammelis,et al.  Comparison of Waste-to-Energy Processes by Means of Life Cycle Analysis Principles regarding the Global Warming Potential Impact: Applied Case Studies in Greece, France and Germany , 2015 .

[25]  Gjalt Huppes,et al.  Life cycle assessment of municipal solid waste management with regard to greenhouse gas emissions: case study of Tianjin, China. , 2009, The Science of the total environment.

[26]  P. He,et al.  Reprint of: Pyrolysis technologies for municipal solid waste: a review. , 2015, Waste management.

[27]  Umberto Arena,et al.  Process and technological aspects of municipal solid waste gasification. A review. , 2012, Waste management.

[28]  Shin-ichi Sakai,et al.  Municipal solid waste incinerator residue recycling by thermal processes , 2000 .

[29]  Hui Wang,et al.  Life cycle assessment of fast pyrolysis of municipal solid waste in North Carolina of USA , 2015 .

[30]  Roberto Turconi,et al.  Life cycle assessment of waste incineration in Denmark and Italy using two LCA models , 2011, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[31]  V. Funari,et al.  The potential impact of municipal solid waste incinerators ashes on the anthropogenic osmium budget. , 2016, The Science of the total environment.

[32]  Jing Deng,et al.  Energy Evaluation for Lignite Pyrolysis by Solid Heat Carrier Coupled with Gasification , 2013 .

[33]  Sven Lundie,et al.  LIFE CYCLE ASSESSMENT OF FOOD WASTE MANAGEMENT OPTIONS , 2005 .

[34]  Peter McKendry,et al.  Energy production from biomass (Part 3): Gasification technologies. , 2002, Bioresource technology.

[35]  George Tchobanoglous,et al.  Municipal Solid Waste and the Environment: A Global Perspective , 2012 .

[36]  G De Feo,et al.  Energy from gasification of solid wastes. , 2003, Waste management.

[37]  Carla Tagliaferri,et al.  Life cycle assessment of conventional and two-stage advanced energy-from-waste technologies for municipal solid waste treatment , 2015 .

[38]  Susan Thorneloe,et al.  Is it better to burn or bury waste for clean electricity generation? , 2009, Environmental science & technology.

[39]  Brent A. Gloy,et al.  Life cycle assessment of biochar systems: estimating the energetic, economic, and climate change potential. , 2010, Environmental science & technology.