3D printed concrete with recycled sand: Pore structures and triaxial compression properties

[1]  Jin Hyun Lee,et al.  Matric suction and its effect on the shape stability of 3D printed concrete , 2022, Cement and Concrete Research.

[2]  G. Bai,et al.  Hardened properties of 3D printed concrete with recycled coarse aggregate , 2022, Cement and Concrete Research.

[3]  Jianzhuang Xiao,et al.  Effects of printing paths and recycled fines on drying shrinkage of 3D printed mortar , 2022, Construction and Building Materials.

[4]  Jianzhuang Xiao,et al.  Thermal conductivity of 3D printed concrete with recycled fine aggregate composite phase change materials , 2022, Journal of Cleaner Production.

[5]  Changqing Wang,et al.  Characterization of sustainable mortar containing high-quality recycled manufactured sand crushed from recycled coarse aggregate , 2022, Cement and Concrete Composites.

[6]  Jianzhuang Xiao,et al.  Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction , 2022, Construction and Building Materials.

[7]  A. du Plessis,et al.  Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete , 2022, Cement and Concrete Research.

[8]  Danying Gao,et al.  Shear behavior analysis and capacity prediction for the steel fiber reinforced concrete beam with recycled fine aggregate and recycled coarse aggregate , 2022, Structures.

[9]  V. Mechtcherine,et al.  Predicting the static yield stress of 3D printable concrete based on flowability of paste and thickness of excess paste layer , 2022, Cement and Concrete Composites.

[10]  Yuliang Chen,et al.  Strength criterion of recycled aggregate concrete under triaxial Compression: Model calibration , 2022, Construction and Building Materials.

[11]  T. Ding,et al.  On rheology of mortar with recycled fine aggregate for 3D printing , 2021, Construction and Building Materials.

[12]  Chengqing Wu,et al.  3D-printing ultra-high performance fiber-reinforced concrete under triaxial confining loads , 2021, Additive Manufacturing.

[13]  D. Asprone,et al.  Dynamic characterization of the layer-interface properties of 3D-printed concrete elements , 2021, Case Studies in Construction Materials.

[14]  Shanyong Wang,et al.  Compression-shear failure properties and acoustic emission (AE) characteristics of rocks in variable angle shear and direct shear tests , 2021 .

[15]  Chengqing Wu,et al.  Experimental investigation of triaxial strength of ultra-high performance concrete after exposure to elevated temperature , 2021 .

[16]  Jikai Zhou,et al.  Experimental investigation on the influence of multiscale pores on the static and dynamic splitting tensile strength of cementitious materials based on the virtual pore method , 2021 .

[17]  Jikai Zhou,et al.  Quantitative relationship between pore size distribution and compressive strength of cementitious materials , 2020 .

[18]  Yalin Yu,et al.  Experimental and theoretical research on the mechanical performance of totally recycled concrete under triaxial compression after high temperatures , 2020 .

[19]  Yu Wang,et al.  3D recycled mortar printing: System development, process design, material properties and on-site printing , 2020 .

[20]  F. Gong,et al.  A new quantitative method to identify the crack damage stress of rock using AE detection parameters , 2020, Bulletin of Engineering Geology and the Environment.

[21]  Jianzhuang Xiao,et al.  Mechanical behavior of 3D printed mortar with recycled sand at early ages , 2020 .

[22]  Yu Wang,et al.  Hardened properties of layered 3D printed concrete with recycled sand , 2020 .

[23]  Xiao-hua Wang,et al.  Influence of the porosity and pore size on the compressive and splitting strengths of cellular concrete with millimeter-size pores , 2020, Construction and Building Materials.

[24]  E. Lui,et al.  Performance evaluation of recycled aggregate concrete under multiaxial compression , 2019 .

[25]  Tao Ding,et al.  A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology , 2019, Materials.

[26]  Yiwei Weng,et al.  Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures , 2018, Virtual and Physical Prototyping.

[27]  Viktor Mechtcherine,et al.  Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing , 2018, Construction and Building Materials.

[28]  Sung-Gul Hong,et al.  The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete , 2018 .

[29]  Zhiheng Deng,et al.  Strength and deformation of recycled aggregate concrete under triaxial compression , 2017 .

[30]  Yalin Yu,et al.  Triaxial compressive strength experiment study of recycled aggregate concrete after high temperatures , 2017 .

[31]  A. Bubeck,et al.  Stress concentrations around voids in three dimensions : The roots of failure , 2017 .

[32]  Q. Fang,et al.  Triaxial compressive behavior of UHPCC and applications in the projectile impact analyses , 2016 .

[33]  Amaechi J. Anyaegbunam,et al.  Nonlinear power-type failure laws for geomaterials: synthesis from triaxial data, properties and applications , 2015 .

[34]  Guangming Chen,et al.  Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures , 2014 .

[35]  A. du Plessis,et al.  An investigation into the porosity of extrusion-based 3D printed concrete , 2021 .

[36]  Geert De Schutter,et al.  Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review , 2021 .

[37]  K. V. Tittelboom,et al.  Combination of Portland cement and Calcium-SulfoAluminate cement : the highroad for durable 3D printing ? , 2019 .

[38]  Liguo Wang,et al.  Feasibility of manufacturing ultra-high performance cement-based composites (UHPCCs) with recycled sand: A preliminary study. , 2019, Waste management.