Comparison of Two-Phase Pipe Flow in OpenFOAM with a Mechanistic Model

Two-phase pipe flow is a common occurrence in many industrial applications such as power generation and oil and gas transportation. Accurate prediction of liquid holdup and pressure drop is of vast importance to ensure effective design and operation of fluid transport systems. In this paper, a Computational Fluid Dynamics (CFD) study of a two-phase flow of air and water is performed using OpenFOAM. The two-phase solver, interFoam is used to identify flow patterns and generate values of liquid holdup and pressure drop, which are compared to results obtained from a two-phase mechanistic model developed by Petalas and Aziz (2002). A total of 60 simulations have been performed at three separate pipe inclinations of 0°, +10° and -10° respectively. A three dimensional, 0.052m diameter pipe of 4m length is used with the Shear Stress Transport (SST) k - ɷ turbulence model to solve the turbulent mixtures of air and water. Results show that the flow pattern behaviour and numerical values of liquid holdup and pressure drop compare reasonably well to the mechanistic model.

[1]  Khalid Aziz,et al.  A Mechanistic Model for Multiphase Flow in Pipes , 2000 .

[2]  Zelimir Schmidt,et al.  A Unified Mechanistic Model for Steady-State Two-Phase Flow in Wellbores and Pipelines , 1999 .

[3]  William J. Bailey,et al.  Steady-State Multiphase Flow—Past, Present, and Future, with a Perspective on Flow Assurance , 2012 .

[4]  D. Bestion,et al.  The difficult challenge of a two-phase CFD modelling for all flow regimes , 2014 .

[5]  Seung Ihl Kam,et al.  Characterization of foam flow in horizontal pipes by using two-flow-regime concept , 2011 .

[6]  Jyotirmay Banerjee,et al.  Experimental visualization of two-phase flow patterns and transition from stratified to slug flow , 2011 .

[7]  Thomas Höhne,et al.  Experimental investigation and CFD simulation of horizontal stratified two-phase flow phenomena , 2008 .

[8]  Milan Stanko,et al.  Air–water: Two Phase Flow Behavior In AHorizontal Pipe Using Computational FluidsDynamics (CFD) , 2012 .

[9]  Ivor R. Ellul,et al.  The Modeling of Multiphase Systems Under Steady-State And Transient Conditions - A Tutorial , 2004 .

[10]  James P. Brill,et al.  A Comprehensive Mechanistic Model for Two-Phase Flow in Pipelines , 1990 .

[11]  James P. Brill,et al.  A Study of Two-Phase Flow in Inclined Pipes , 1973 .

[12]  M. Trujillo,et al.  Evaluating the performance of the two-phase flow solver interFoam , 2012 .

[13]  Tapas Kumar Mandal,et al.  Oil-Water Two-Phase Flow Characteristics in Horizontal Pipeline – A Comprehensive CFD Study , 2014 .

[14]  Jon Izarra Labeaga,et al.  Two-Phase pipeflow simulations with OpenFoam , 2013 .

[15]  A. Dukler,et al.  A model for predicting flow regime transitions in horizontal and near horizontal gas‐liquid flow , 1976 .

[16]  Alessandro Paglianti,et al.  Dispersed bubble flow in horizontal pipes , 1999 .

[17]  Roland Rzehak,et al.  Multiphase CFD-simulation of bubbly pipe flow: A code comparison , 2015 .

[18]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[19]  K. Aziz,et al.  A flow pattern map for gas—liquid flow in horizontal pipes , 1974 .

[20]  Ovadia Shoham,et al.  Flow pattern transition for downward inclined two phase flow; horizontal to vertical , 1982 .

[21]  Paulo A. B. De Sampaio,et al.  Modelling of stratified gas–liquid two-phase flow in horizontal circular pipes , 2008 .