Low-g Area-changed MEMS Accelerometer Using Bulk Silicon Technique

A bulk micromachined accelerometer based on an area variation capacitive sensing for low-g applications was developed. The accelerometer was designed with ribbed-style fingers structure on the movable mass connected in parallel and suspended over stationary electrodes composed of differential comb fingers by means of suspension beams anchored onto the substrate. A folded, rigid truss suspension design with low spring constant and low cross-axis sensitivity was chosen. The simulation was performed using Coventorware software. A three- mask bulk micromachining wafer bonding fabrication process was utilized to realize the accelerometer. Silicon-on-glass was used to achieve high sensitivity and low mechanical noise while maintaining a simple structure. The general concept, main design considerations, fabrication procedure and performance of the resulted accelerometer was elaborated and presented. A linear relationship between the differential capacitance and acceleration was obtained. The accelerometer sensitivity was calculated to be 0.47 pF/g with an acceleration range of ±5 g.

[1]  Zhihong Li,et al.  Laterally capacity sensed accelerometer fabricated with the anodic bonding and the high aspect ratio etching , 1998, 1998 5th International Conference on Solid-State and Integrated Circuit Technology. Proceedings (Cat. No.98EX105).

[2]  Junseok Chae,et al.  A hybrid Silicon-On-Glass (SOG) lateral micro-accelerometer with CMOS readout circuitry , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[3]  J. C. Liitter.  Design , realization and characterization of a symmetrical triaxial capacitive accelerometer for medical applications , 2003 .

[4]  B. Boser,et al.  A monolithic surface micromachined accelerometer with digital output , 1995 .

[5]  A. Selvakumar.  A multifunctional silicon micromachining technology for high performance microsensors and microactuators. , 1997 .

[6]  B.Y. Majlis,et al.  Suspension design analysis on the performance of MEMS area-changed lateral capacitive accelerometer , 2004, 2004 IEEE International Conference on Semiconductor Electronics.

[7]  G. Kovacs,et al.  Force-balanced accelerometer with mG resolution, fabricated using Silicon Fusion Bonding and Deep Reactive Ion Etching , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[8]  Byeungleul Lee,et al.  A Capacitive Silicon Microaccelerometer With Force Balancing Electrodes , 1998, Digest of Papers. Microprocesses and Nanotechnology'98. 198 International Microprocesses and Nanotechnology Conference (Cat. No.98EX135).

[9]  N. Lobontiu.  Mechanics of microelectromechanical systems , 2004 .

[10]  K. Najafi,et al.  A high-sensitivity silicon accelerometer with a folded-electrode structure , 2003 .

[11]  Brian Barkley Graham.  Using an accelerometer sensor to measure human hand motion , 2000 .

[12]  T. Gabrielson.  Mechanical-thermal noise in micromachined acoustic and vibration sensors , 1993 .

[13]  Khalil Najafi,et al.  A high-sensitivity z-axis capacitive silicon microaccelerometer with a torsional suspension , 1998 .

[14]  K. Najafi,et al.  An all-silicon single-wafer micro-g accelerometer with a combined surface and bulk micromachining process , 2000, Journal of Microelectromechanical Systems.

[15]  Josef Binder,et al.  Implantable low-g accelerometer for the telemetric monitoring of micro-movements in fracture zones , 2000, 1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology. Proceedings (Cat. No.00EX451).

[16]  Stephen F. Bart,et al.  An integrated force-balanced capacitive accelerometer for low-g applications , 1996 .

[17]  Weiyuan Wang,et al.  Micromachined accelerometer with area-changed capacitance , 2001 .