Energy and exergy assessments of a novel trigeneration system based on a solid oxide fuel cell

Energy and exergy assessments are reported of a novel trigeneration system based on a solid oxide fuel cell (SOFC), for steady-state operation and using a zero-dimensional approach. The trigeneration system also includes a generator-absorber heat exchanger for cooling and a heat exchanger for the heating process. The influences of two significant SOFC parameters (current density and inlet flow temperature) on several variables are investigated. The results show that the energy efficiency is a minimum of 33% higher when using the trigeneration system compared with the SOFC power cycle. In addition, the maximum energy efficiencies are found to be 79% for the trigeneration system, 69% for the heating cogeneration, 58% for cooling cogeneration and 46% for electricity production. Moreover, the highest trigeneration exergy efficiency is almost 47% under the given conditions. It is also shown that, as SOFC current density increases, the exergy efficiencies decrease for the power cycle, cooling cogeneration, heating cogeneration and trigeneration. As current density increases, the trigeneration energy and exergy efficiencies decrease, and an optimal current density is observed to exist at which the net electrical power is a maximum. As SOFC inlet flow temperature increases, the trigeneration energy and exergy efficiencies and net electrical power increase to a peak and then decrease. The main exergy destructions occur in the air heat exchanger, the SOFC and the afterburner.

[1]  Khiam Aik Khor,et al.  An electrolyte model for ceramic oxygen generator and solid oxide fuel cell , 2002 .

[2]  Yiping Dai,et al.  Thermodynamic analysis of an integrated power generation system driven by solid oxide fuel cell , 2012 .

[3]  Eric Croiset,et al.  A multi-level simulation platform of natural gas internal reforming solid oxide fuel cell–gas turbine hybrid generation system: Part I. Solid oxide fuel cell model library , 2010 .

[4]  Aristide F. Massardo,et al.  Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A—Cell Model and Cycle Thermodynamic Analysis , 2000 .

[5]  Jun Li,et al.  Cycle analysis of an integrated solid oxide fuel cell and recuperative gas turbine with an air reheating system , 2007 .

[6]  Wei Chen,et al.  Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications , 2010 .

[7]  Adriano V. Ensinas,et al.  Thermo-economic optimization of a Solid Oxide Fuel Cell – Gas turbine system fuelled with gasified lignocellulosic biomass , 2014 .

[8]  H. H. Erdem,et al.  An analysis of SOFC/GT CHP system based on exergetic performance criteria , 2008 .

[9]  Kai Choong Leong,et al.  Numerical study of an internal-reforming solid oxide fuel cell and adsorption chiller co-generation system , 2006 .

[10]  Yoshitaka Inui,et al.  High performance SOFC/GT combined power generation system with CO2 recovery by oxygen combustion method , 2005 .

[11]  Diamantis P. Bakalis,et al.  Full and part load exergetic analysis of a hybrid micro gas turbine fuel cell system based on existing components , 2012 .

[12]  Scott A. Barnett,et al.  Intermediate Temperature Solid Oxide Fuel Cell Development , 2008 .

[13]  I. Dincer,et al.  Energy analysis of a trigeneration plant based on solid oxide fuel cell and organic Rankine cycle , 2010 .

[14]  Vittorio Verda,et al.  Solid Oxide Fuel Cell System Configurations for Distributed Generation , 2008 .

[15]  Francesco Calise,et al.  Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System , 2006 .

[16]  J. Szargut.  Exergy Method: Technical and Ecological Applications , 2005 .

[17]  Mortaza Yari,et al.  Energy and exergy analyses of GAX and GAX hybrid absorption refrigeration cycles , 2011 .

[18]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[19]  Steven B. Kraines,et al.  CO2-emissions reduction potential and costs of a decentralized energy system for providing electricity, cooling and heating in an office-building in Tokyo , 2006 .

[20]  Daniel Favrat,et al.  Multi-criteria optimization of a district cogeneration plant integrating a solid oxide fuel cell–gas turbine combined cycle, heat pumps and chillers , 2003 .

[21]  S. Chan,et al.  Energy and exergy analysis of simple solid-oxide fuel-cell power systems , 2002 .

[22]  Winston S. Burbank,et al.  Model of a novel pressurized solid oxide fuel cell gas turbine hybrid engine , 2009 .

[23]  I. Dincer,et al.  Performance comparison of two combined SOFC–gas turbine systems , 2007 .

[24]  Ali Volkan Akkaya,et al.  A study on performance of solid oxide fuel cell‐organic Rankine cycle combined system , 2009 .

[25]  G. Naterer,et al.  Thermodynamic modeling of a gas turbine cycle combined with a solid oxide fuel cell , 2008 .

[26]  I. Dincer,et al.  Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngas , 2007 .

[27]  Yiping Dai,et al.  Thermodynamic analysis of a new combined cooling, heat and power system driven by solid oxide fuel cell based on ammonia–water mixture , 2011 .

[28]  S. Singhal,et al.  Polarization Effects in Intermediate Temperature, Anode‐Supported Solid Oxide Fuel Cells , 1999 .

[29]  Tak-Hyoung Lim,et al.  Operating characteristics of a 5 kW class anode-supported planar SOFC stack for a fuel cell/gas turbine hybrid system , 2008 .

[30]  Feridun Hamdullahpur,et al.  Exergy analysis of an integrated solid oxide fuel cell and organic Rankine cycle for cooling, heating and power production , 2010 .

[31]  Alan S. Fung,et al.  Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle: Application of alternative fuels , 2013 .

[32]  Masoud Rokni,et al.  Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels , 2013 .