Impact of an aortic valve implant on body surface UWB propagation: A preliminary study

Efficient transceiver design in body area networks requires in-depth understanding of the propagation channel which in this case involves the human body. Several studies have been done to characterize RF propagation on the body surface and determine the parameters of an appropriate model. However, the possible effect of an already existing medical implant on body surface propagation has not been considered until during a recent measurement experiment. There it was discovered that an aortic implant may have an impact on Ultra Wide-Band (UWB) propagation between wearable nodes that are in the vicinity of the implant location. In this paper, we use a 3D immersive visualization environment to study and observe the impact of an aortic implant on body surface propagation. Specifically, we focus on the UWB impulse response of the channel between nodes located around the upper body. The difference in the obtained impulse responses (for scenarios with and without the implant) both in measurement and simulation points to the possible impact that such medical implants could have on body surface RF propagation.

[1]  Philippe De Doncker,et al.  Ultra-wideband channel model for communication around the human body , 2006, IEEE Journal on Selected Areas in Communications.

[2]  Judith E. Terrill,et al.  Simulation study of body surface RF propagation for UWB wearable medical sensors , 2009, 2009 2nd International Symposium on Applied Sciences in Biomedical and Communication Technologies.

[3]  Jari Iinatti,et al.  Channel Modeling for Wireless Body Area Networks in Medical Applications , 2009 .

[4]  G. Troster,et al.  UWB for noninvasive wireless body area networks: channel measurements and results , 2003, IEEE Conference on Ultra Wideband Systems and Technologies, 2003.

[5]  Jari Iinatti,et al.  Effect of body motion and the type of antenna on the measured UWB channel characteristics in medical applications of wireless body area networks , 2009, 2009 IEEE International Conference on Ultra-Wideband.

[6]  G. Grunkemeier,et al.  Twenty years' experience with the Medtronic Hall valve. , 2001, The Journal of thoracic and cardiovascular surgery.

[7]  John G. Hagedorn,et al.  Measurement Tools for the Immersive Visualization Environment: Steps Toward the Virtual Laboratory , 2007, Journal of research of the National Institute of Standards and Technology.

[8]  Jari H. Iinatti,et al.  UWB channel modelling for wireless body area networks in a hospital , 2010, Int. J. Ultra Wideband Commun. Syst..

[9]  Judith E. Terrill,et al.  A statistical path loss model for medical implant communication channels , 2009, 2009 IEEE 20th International Symposium on Personal, Indoor and Mobile Radio Communications.

[10]  R. Kohno,et al.  UWB antenna for wireless body area network , 2006, 2006 Asia-Pacific Microwave Conference.

[11]  R. Kohno,et al.  Ultra wideband L-loop antenna , 2005, 2005 IEEE International Conference on Ultra-Wideband.