Characterization of a bonding-in-liquid technique for liquid encapsulation into MEMS devices

We demonstrate and characterize a new bonding-in-liquid technique (BiLT) for the encapsulation of liquids in MEMS devices. Liquid encapsulation enables innovative MEMS devices with various functions exploiting the unique characteristics of liquids, such as high deformation and spherical shape due to surface tension. Interfusion of air bubbles, variation of the liquid quantity and leakage of the encapsulated liquid must be avoided, or device performance will deteriorate. In BiLT, two structural layers are passively aligned and brought into contact in a solution, and the encapsulation cavities are filled uniformly with liquid, without air bubbles. A UV-curable resin is used as an adhesive that does not require heat or vacuum to bond the layers, but UV irradiation. DI water, glycerin and phosphate buffer saline were successfully encapsulated in silicon structural layers with PDMS membranes. We experimentally evaluated the bond strengths and alignment accuracy of BiLT in order to provide crucial information for the application of this process to the packaging and/or manufacturing of MEMS devices. Since conventional aligners are not applicable to BiLT, we experimentally evaluated the accuracy of an in-solution passive alignment process, which made use of matching concave and convex structures.

[1]  Yong Kook Kim,et al.  Low temperature epoxy bonding for wafer level MEMS packaging , 2008 .

[2]  Hsing-Cheng Chang,et al.  A Novel Wafer-Level Hermetic Packaging for MEMS Devices , 2007, IEEE Transactions on Advanced Packaging.

[3]  Dong-il Dan Cho,et al.  Wafer-level hermetic packaged microaccelerometer with fully differential BiCMOS interface circuit , 2007 .

[4]  Norihisa Miki.  Wafer bonding techniques for MEMS , 2005 .

[5]  Wafer-Level Packaging for Micro-Electro-Mechanical Systems Using Surface Activated Bonding , 2007 .

[6]  Khalil Najafi,et al.  An Electrically-Driven, Large-Deflection, High-Force, Micro Piston Hydraulic Actuator Array for Large-Scale Microfluidic Systems , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.

[7]  Norihisa Miki,et al.  MEMS-based hydraulic displacement amplification mechanism with completely encapsulated liquid , 2011 .

[8]  G. Stemme,et al.  Room-temperature wafer-level hermetic sealing for liquid reservoirs by gold ring embossing , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[9]  S. Matsumoto,et al.  New methods for liquid encapsulation in polymer MEMS structures , 2008, 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems.

[10]  Wood-Hi Cheng,et al.  Fabrication and Performance of MEMS-Based Pressure Sensor Packages Using Patterned Ultra-Thick Photoresists , 2009, Sensors.

[11]  Woo-Tae Park,et al.  Long-Term and Accelerated Life Testing of a Novel Single-Wafer Vacuum Encapsulation for MEMS Resonators , 2006, Journal of Microelectromechanical Systems.

[12]  N. Miki,et al.  Vibrational Braille code display with MEMS-Based hydraulic diplacement amplification mechanism , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).

[13]  E. Meng,et al.  A Parylene Bellows Electrochemical Actuator , 2010, Journal of Microelectromechanical Systems.

[14]  Nguyen Binh-Khiem,et al.  Polymer thin film deposited on liquid for varifocal encapsulated liquid lenses , 2008 .

[15]  Yuhua Zhang,et al.  Sensitivity enhancement of a micro-scale biomimetic tactile sensor with epidermal ridges , 2010 .

[16]  Norihisa Miki,et al.  Dynamic Characteristics of a Hydraulic Amplification Mechanism for Large Displacement Actuators Systems , 2010, Sensors.

[17]  Alexander H. Slocum,et al.  Precision passive mechanical alignment of wafers , 2003 .

[18]  A. V. Pocius,et al.  Adhesion and Adhesives Technology: An Introduction , 1996 .

[19]  N. Miki,et al.  Multi-stack silicon-direct wafer bonding for 3D MEMS manufacturing , 2003 .