Development of a virtual pump water flow meter with a flow rate function of motor power and pump head

Abstract Water flow rates are key operating variables in chilled and hot water systems. The water flow rate through a pump can be virtually measured using available motor power and pump head with projected motor and pump efficiencies. In general, motor efficiency is implicitly determined by motor power while pump efficiency is given as a function of water flow rate. As a result, the water flow rate has to be calculated through a numerical method, which is difficult to apply in building automation systems (BAS). The objective of this paper is to develop a virtual pump water flow meter, which can be implemented in BAS with an explicit expression of motor power and pump head. First, motor efficiency is regressed as a function of motor power by consolidating multiple dependent factors, then pump efficiency function is reconstructed with pump shaft power and head, and finally experiments are conducted to develop and validate a virtual pump water flow meter on a chilled water pump. The experimental results show that the virtual flow measurements agree well with the flow measurement by a physical meter. The measurement standard deviation is 0.5 L/s for a pump with the design flow rate of 37.9 L/s.

[1]  M. Liu,et al.  Variable Speed Drive Volumetric Tracking for Airflow Control in Variable Air Volume Systems , 2003 .

[2]  Gang Wang,et al.  Uncertainty analysis for a virtual flow meter using an air-handling unit chilled water valve , 2013 .

[3]  Handong Wang.  Water flow rate models based on the pipe resistance and pressure difference in multiple parallel chiller systems , 2014 .

[4]  Mo Yang,et al.  Field implementation and evaluation of a decoupling-based fault detection and diagnostic method for chillers , 2014 .

[5]  Theodore Wildi,et al.  Electrical Machines, Drives, and Power Systems , 1990 .

[6]  Charles M. Burt,et al.  Electric Motor Efficiency under Variable Frequencies and Loads , 2008 .

[7]  Dariusz Czarkowski,et al.  Efficiency and separation of losses of an induction motor and its adjustable-speed drive at different loading/speed combinations , 1997 .

[8]  Guopeng Liu.  Development and applications of fan airflow station and pump water flow station in heating, ventilating and air -conditioning (HVAC) systems , 2006 .

[9]  Boris Igor Palella,et al.  Heat accounting in historical buildings , 2015 .

[10]  Shengwei Wang,et al.  A fault-tolerant and energy efficient control strategy for primary–secondary chilled water systems in buildings , 2011 .

[11]  Austin Hughes,et al.  Electric Motors and Drives: Fundamentals, Types and Applications , 1990 .

[12]  Gang Wang,et al.  Investigations on a virtual airflow meter using projected motor and fan efficiencies , 2014 .

[13]  José M. Corberán,et al.  In situ optimization methodology for the water circulation pumps frequency of ground source heat pump systems , 2014 .

[14]  Xinzhi Zhao,et al.  Lab test of three fault detection and diagnostic methods’ capability of diagnosing multiple simultaneous faults in chillers , 2015 .