Thermally driven heat pumps for heating and cooling

Zugleich gedruckt erschienen im Universitatsverlag der TU Berlin unter der ISBN 978-3-7983-2686-6

[1]  E. C. McKelvey,et al.  Causes and prevention of the formation of non-condensible gases in ammonia absorption refrigeration machines☆ , 1921 .

[2]  J. Keenan,et al.  An Investigation of Ejector Design by Analysis and Experiment , 1950 .

[3]  H. E. Rohlik.  Analytical determination of radial inflow turbine design geometry for maximum efficiency , 1968 .

[4]  David F. Bagster,et al.  A New Ejector Theory Applied to Steam Jet Refrigeration , 1977 .

[5]  O. E. Baljé,et al.  Turbomachines—A Guide to Design Selection and Theory , 1981 .

[6]  J. C. Griess,et al.  Corrosion of materials in absorption heating and refrigeration fluids , 1985 .

[7]  D. Behrens.  Aliphatic aldehydes, ammonia and ammomium hydroxide, sodium hydroxide, soil(underground corrosion) , 1988 .

[8]  M. Sokolov,et al.  Enhanced ejector refrigeration cycles powered by low grade heat. Part 1. Systems characterization , 1990 .

[9]  M. Sokolov,et al.  Enhanced ejector refrigeration cycles powered by low grade heat. Part 2. Design procedures , 1990 .

[10]  M. Sokolov,et al.  Optimal coupling and feasibility of a solar-powered year-round ejector air conditioner , 1993 .

[11]  M. Sokolov,et al.  Solar-powered compression-enhanced ejector air conditioner , 1993 .

[12]  E. Iso,et al.  Measurement Uncertainty and Probability: Guide to the Expression of Uncertainty in Measurement , 1995 .

[13]  P. Desevaux,et al.  Static pressure measurement along the centerline of an induced flow ejector , 1994 .

[14]  Falin Chen,et al.  Supersonic flow in the second-throat ejector-diffuser system , 1994 .

[15]  A. Agrawal,et al.  Evaluation of alternative corrosion inhibitors for gas-fired ammonia/water refrigeration machines. Final report, April 1993-April 1995 , 1995 .

[16]  J. J. Wang,et al.  On the start condition of a second-throat ejector-diffuser , 1996, The Aeronautical Journal (1968).

[17]  Rubén J. Dorantes,et al.  Mathematical simulation of a solar ejector-compression refrigeration system , 1996 .

[18]  Saffa Riffat,et al.  Computational fluid dynamics applied to ejector heat pumps , 1996 .

[19]  Satha Aphornratana,et al.  Evaluation of a novel combined ejector-absorption refrigeration cycle — I: computer simulation , 1996 .

[20]  Da-Wen Sun,et al.  Solar powered combined ejector-vapour compression cycle for air conditioning and refrigeration , 1997 .

[21]  Satha Aphornratana,et al.  Experimental investigation of a combined ejector-absorption refrigerator , 1998 .

[22]  Bin-Juine Huang,et al.  A solar ejector cooling system using refrigerant R141b , 1998 .

[23]  I. Eames,et al.  A review of adsorbents and adsorbates in solid–vapour adsorption heat pump systems , 1998 .

[24]  Bin-Juine Huang,et al.  A 1-D analysis of ejector performance , 1999 .

[25]  R. E. Critoph.  Forced convection adsorption cycle with packed bed heat regeneration , 1999 .

[26]  Saffa Riffat,et al.  Experimental and CFD modelling of an ejector system for vehicle air conditioning , 1999 .

[27]  C. L. Hannon,et al.  Development of Improved Corrosion Inhibitors for Ammonia-Water Absorption Heat Pumps , 2000, Advanced Energy Systems.

[28]  Bin-Juine Huang,et al.  A combined-cycle refrigeration system using ejector-cooling cycle as the bottom cycle. , 2001 .

[29]  Robert E. Critoph.  Simulation of a continuous multiple-bed regenerative adsorption cycle , 2001 .

[30]  Saffa Riffat,et al.  CFD modelling and experimental investigation of an ejector refrigeration system using methanol as the working fluid , 2001 .

[31]  Wim G. Haije,et al.  Techno-economic feasibility of high-temperature high-lift chemical heat pumps for upgrading industrial waste heat , 2002 .

[32]  G. Cacciola,et al.  A family of new working materials for solid sorption air conditioning systems , 2002 .

[33]  Felix Ziegler,et al.  State of the art in sorption heat pumping and cooling technologies , 2002 .

[34]  M Ouzzane,et al.  Model development and numerical procedure for detailed ejector analysis and design , 2003 .

[35]  Mohamed Ouzzane,et al.  The effect of operating conditions on the performance of a supersonic ejector for refrigeration , 2004 .

[36]  Yann Bartosiewicz,et al.  Numerical and Experimental Investigations on Supersonic Ejectors , 2005 .

[37]  R. E. Critoph,et al.  Review of trends in solid sorption refrigeration and heat pumping technology , 2005 .

[38]  R. E. Critoph.  Modular regenerative adsorption cycles with fixed beds, applied to trigeneration , 2005 .

[39]  G. K. Alexis,et al.  A solar ejector cooling system using refrigerant R134a in the Athens area , 2005 .

[40]  Yann Bartosiewicz,et al.  Numerical assessment of ejector operation for refrigeration applications based on CFD , 2006 .

[41]  E. Estiot,et al.  Heat Exchanger Development for Compact Water/LiBr Sorption Systems , 2006 .

[42]  A. Yokozeki,et al.  Ammonia Solubilities in Room-Temperature Ionic Liquids , 2007 .

[43]  A. Freni,et al.  An advanced solid sorption chiller using SWS-1L , 2007 .

[44]  E. J. Bakker,et al.  Floor cooling and air-cooling, the effects on thermal comfort or different cooling systems , 2007 .

[45]  A. Yokozeki,et al.  Vapor–liquid equilibria of ammonia + ionic liquid mixtures , 2007 .

[46]  Belal Dawoud,et al.  Non-isothermal adsorption kinetics of water vapour into a consolidated zeolite layer , 2007 .

[47]  Ian C. Kemp,et al.  Pinch Analysis and Process Integration: A User Guide on Process Integration for the Efficient Use of Energy , 2007 .

[48]  Daniel Favrat,et al.  Environomic multi-objective optimisation of a district heating network considering centralized and decentralized heat pumps , 2010 .

[49]  Mahmoud M. El-Halwagi.  Pinch Analysis and Process Integration: A User Guide on Process Integration for the Efficient Use of Energy By Ian C. Kemp, 2nd ed. , 2008 .

[50]  C. Scherr,et al.  WATER AS REFRIGERANT – EXPERIMENTAL EVALUATION OF BOILING CHARACTERISTICS AT LOW TEMPERATURES AND PRESSURES , 2008 .

[51]  Mohamed Ouzzane,et al.  CFD Simulations of a Supersonic Ejector for Use in Refrigeration Applications , 2008 .

[52]  Daniel Favrat,et al.  Low power ORC-ORC systems for heat pump applications , 2008 .

[53]  Jürg Alexander Schiffmann.  Integrated design, optimization and experimental investigation of a direct driven turbocompressor for domestic heat pumps , 2008 .

[54]  E. J. Bakker,et al.  TESTING A PROTOTYPE GAS-FIRED RESIDENTIAL HEAT PUMP , 2008 .

[55]  Fraunhofer Izm,et al.  Adaptation to scientific and technical progress under Directive 2002/95/EC , 2009 .

[56]  A. Freni,et al.  Zeolite synthesised on copper foam for adsorption chillers: A mathematical model , 2009 .

[57]  R. de Boer,et al.  Development of a new 2.5 kW adsorption chiller for heat driven cooling , 2009 .

[58]  H. Mehling,et al.  Solar heating and cooling system with absorption chiller and low temperature latent heat storage: Energetic performance and operational experience , 2009 .

[59]  Clemens Pollerberg,et al.  Solar driven steam jet ejector chiller , 2009 .

[60]  Ahmed Hamza H. Ali,et al.  Characteristics of the membrane utilized in a compact absorber for lithium bromide–water absorption chillers , 2009 .

[61]  Christoph Janiak,et al.  MOFs as adsorbents for low temperature heating and cooling applications. , 2009, Journal of the American Chemical Society.

[62]  Walter Mittelbach,et al.  Zeolite/aluminum composite adsorbents for application in adsorption refrigeration , 2009 .

[63]  Melkon Tatlier,et al.  Adsorption kinetics of zeolite coatings directly crystallized on metal supports for heat pump applications (adsorption kinetics of zeolite coatings) , 2010 .

[64]  H. Henning,et al.  Water adsorption characteristics of novel materials for heat transformation applications , 2010 .

[65]  M. Seiler,et al.  New High-performance Working Pairs for Absorption Chillers and Heat Pumps , 2010 .

[66]  S. F. Smeding,et al.  Waste heat driven silica gel/water adsorption cooling in trigeneration , 2010 .

[67]  B. Dawoud,et al.  Experimental Investigation of the Effect Of Zeolite Coating Thickness on the Performance of a Novel Zeolite-Water Adsorption Heat Pump Module , 2010 .

[68]  Tomomi Nakano,et al.  The Development of Aqsoa Water Vapor Adsorbent and Aqsoa Coated Heat Exchanger , 2010 .

[69]  José M. Corberán,et al.  Modelling of an adsorption system driven by engine waste heat for truck cabin A/C. Performance estimation for a standard driving cycle , 2010 .

[70]  Ruzhu Wang,et al.  Study of thermal conductivity, permeability, and adsorption performance of consolidated composite activated carbon adsorbent for refrigeration , 2011 .

[71]  F. Ziegler,et al.  Heat transfer calculation for absorption heat pumps under variable flow rate conditions. , 2011 .

[72]  Andrea Frazzica,et al.  Influence of the management strategy and operating conditions on the performance of an adsorption ch , 2011 .

[73]  R. Rieberer,et al.  Thermodynamic analysis of ammonia/ionic liquid absorption heat pumping processes. , 2011 .

[74]  P. Stephan,et al.  Heat Loss Evaluation of an Experimental Set-up for predicting the Initial Stage of the Boiling Curve for Water at Low Pressure , 2011 .

[75]  S. F. Smeding,et al.  Measurement results of a hybrid adsorption-compression heat pump based on a roots compressor and silica gel-water sorption cycle , 2011 .

[76]  S. Henninger,et al.  Cycle stability of sorption materials and composites for the use in heat pumps and cooling machines , 2011 .

[77]  C. Schweigler,et al.  Experimental investigation of ionic liquid emim EtSO4 as solvent in a single-effect cycle with adiabatic absorption and desorption. , 2011 .

[78]  U. Wittstadt,et al.  Numerical layer optimization of aluminum fibre/SAPO-34 composites for the application in adsorptive heat exchangers. , 2011 .

[79]  R. Schneider,et al.  Ionic liquids: new high-performance working fluids for absorption chillers and heat pumps. , 2011 .

[80]  C. Pollerberg,et al.  Phase Change Slurries as Cold Storage Fluid with High Energy Density for Solar Cooling , 2011 .

[81]  C. Janiak,et al.  MOFs for Use in Adsorption Heat Pump Processes , 2012 .

[82]  C. Janiak,et al.  High performance metal-organic-framework coatings obtained via thermal gradient synthesis. , 2012, Chemical communications.

[83]  S. Henninger,et al.  Evaluation of methanol/activated carbons for thermally driven chillers, part II: The energy balance model , 2012 .

[84]  Kyle R. Gluesenkamp.  Development and analysis of micro polygeneration systems and adsorption chillers , 2012 .

[85]  Yuri I. Aristov,et al.  Adsorption chilling driven by low temperature heat: New adsorbent and cycle optimization , 2012 .

[86]  H. Henning,et al.  Evaluation of methanol adsorption on activated carbons for thermally driven chillers part I: Thermophysical characterisation , 2012 .

[87]  Reinhard Radermacher,et al.  Experimental Study on Performance of a Residential Combined Cooling, Heating and Power System Under Varying Building Load , 2013 .

[88]  L. Bonaccorsi,et al.  Adsorbent coatings for heat pumping applications: Verification of hydrothermal and mechanical stabilities , 2013 .

[89]  E. Proverbio,et al.  Synthesis of SAPO-34 on graphite foams for adsorber heat exchangers , 2013 .

[90]  B. Dawoud.  Water vapor adsorption kinetics on small and full scale zeolite coated adsorbers; A comparison , 2013 .

[91]  R. E. Critoph,et al.  Development of a carbon-ammonia adsorption gas-fired domestic heat pump. , 2014 .