Effect of packing in the airflow passage on the performance of a solar air-heater with conical concentrator

Abstract In this work, a selective absorbing surface and packing in the two-pass airflow passage of the absorbing tube were used and their effects on the efficiencies of a new solar air heater with a conical concentrator tracking the sun from sunrise to sunset were investigated. Aluminium wire mesh with a variety of folding number was tested as the packing material. The results were compared to those obtained with empty absorbing tube. Beside these, various aspects of the heat and fluid flow in the absorbing tube as influencing the system performance were searched by evaluating friction factors, pumping power, convective heat transfer coefficients and Colburn factors for empty and packed airflow passage of the absorbing tube. Although, incorporation independently of selective surface or packing material resulted the efficiency of the system to increase considerably, the highest efficiencies were obtained by using both. It was found that the airside heat transfer coefficient has been about 26 W/m 2  K for empty airflow passage of the absorbing tube. By using aluminium wire mesh packing, the heat transfer coefficient increased regularly with increasing number of folds of the wire mesh packing and reached to 240 W/m 2  K in the case of 14 folds.

[1]  N. E. Wijeysundera,et al.  Thermal performance study of two-pass solar air heaters , 1982 .

[2]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[3]  S. A. Mumma,et al.  The application of ASHRAE Standard 93-77 to the thermal performance testing of air solar collectors , 1978 .

[4]  C. Choudhury,et al.  A solar air heater for low temperature applications , 1988 .

[5]  J. Saini,et al.  Heat transfer and friction factor correlations for rectangular solar air heater duct packed with wire mesh screen matrices , 1998 .

[6]  Yaşar Demirel,et al.  Thermal performance study of a solar air heater with packed flow passage , 1987 .

[7]  T. Reddy,et al.  Generating application design data for solar air heating systems , 1980 .

[8]  B. N. Prasad,et al.  Effect of artificial roughness on heat transfer and friction factor in a solar air heater , 1988 .

[9]  Soteris A. Kalogirou,et al.  Modelling, optimisation and performance evaluation of a parabolic trough solar collector steam generation system , 1997 .

[10]  I. T. Toğrul,et al.  The performance of a solar air heater with conical concentrator under forced convection , 2003 .

[11]  A. Hachemi,et al.  Experimental study of thermal performance of offset rectangular plate fin absorber-plates , 1999 .

[12]  Moh’d A. Al-Nimr,et al.  A modified tubeless solar collector partially filled with porous substrate , 1998 .

[13]  H. P. Garg,et al.  Evaluation of a jet plate solar air heater , 1991 .

[14]  S. P. Sharma,et al.  Thermal performance of packed-bed solar air heaters , 1991 .

[15]  E. K. May,et al.  Steam generation in line-focus solar collectors: a comparative assessment of thermal performance, operating stability, and cost issues , 1982 .

[16]  R. Collier.  Characterization of crushed glass as a transpired air heating solar collector material , 1979 .

[17]  H. P. Garg,et al.  Theoretical analysis on a new finned type solar air heater , 1991 .

[18]  J. Duffie,et al.  A slit-and -expanded aluminum-foil matrix solar collector , 1965 .

[19]  R. Viskanta,et al.  EXPERIMENTAL STUDIES ON A SOLAR AIR COLLECTOR WITH METAL MATRIX ABSORBER , 1999 .

[20]  N. K. Bansal,et al.  Development and testing of low cost solar energy collectors for heating air , 1984 .

[21]  H. K. Varma,et al.  Thermohydraulic performance of packed-bed solar air heaters , 1996 .

[22]  M. J. Shoemaker.  Notes on a solar collector with unique air permeable media , 1961 .

[23]  C. C. Furnas.  Heat Transfer From a Gas Stream to a Bed of Broken Solids , 1930 .

[24]  T.E.W. Schumann,et al.  Heat transfer: A liquid flowing through a porous prism , 1929 .

[25]  M. N. Metwally,et al.  Performance of advanced corrugated-duct solar air collector compared with five conventional designs , 1997 .

[26]  I. T. Toğrul,et al.  Development and testing of a solar air-heater with conical concentrator , 2004 .

[27]  J. Duffie,et al.  Energy Balances on a Parabolic Cylinder Solar Collector , 1962 .

[28]  A. Mohamad.  High efficiency solar air heater , 1997 .

[29]  Anthony G. Dixon,et al.  Theoretical prediction of effective heat transfer parameters in packed beds , 1979 .

[30]  H. P. Garg,et al.  Performance of air-heating collectors with packed airflow passage , 1993 .