Simulative and experimental study of metal/polymer interfacial dynamic shear response

[1]  M. Arrigoni,et al.  Experimental and numerical investigations of a soft projectile impact three-point bending (SPITPB) test for adhesion assessment under dynamic loading , 2023, European Journal of Mechanics - A/Solids.

[2]  S. Mariani,et al.  Leadframe-Epoxy Moulding Compound Adhesion: a Micromechanics-driven Investigation , 2023, International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems.

[3]  Y. Kajihara,et al.  Direct joining between nano-textured metal and non-crystalline polymer via heating and cooling injection molding , 2023, CIRP Annals.

[4]  G. Luo,et al.  Dynamic response of metal/polymer bilayer composite with optimized surface porosity by experiment and simulation , 2023, Journal of Materials Research and Technology.

[5]  D. Croccolo,et al.  On the impact strength of adhesive bonded pin-and-collar joints , 2023, International Journal of Adhesion and Adhesives.

[6]  Yanxi Zhang,et al.  Research Progress on Characterization and Regulation of Forming Quality in Laser Joining of Metal and Polymer, and Development Trends of Lightweight Automotive Applications , 2022, Metals.

[7]  L. Lang,et al.  A visco-elastoplastic constitutive model of aircraft polymethylmethacrylate related to strain rate and temperature , 2022, Chinese Journal of Aeronautics.

[8]  Y. Jiao,et al.  Effect of the Polymer on the Joint Strength of Polymer/Copper Hybrids Produced by Nano-Injection Molding: Comparison of Polybutylene Terephthalate and Polyphenylene Sulfide Via Experimental and Computational Methods , 2022, SSRN Electronic Journal.

[9]  G. Luo,et al.  Easy characterization of the etched Al5052 surfaces and its distinctive data correlation with the Al5052/PMMA bonding performance , 2022, Materials Today Communications.

[10]  Han Zhao,et al.  Numerical study on crack propagation under explosive loads , 2022, Acta Mechanica Sinica.

[11]  J. Qiu,et al.  Effect of interfacial nanostructures on shear strength of Al-PPS joints fabricated via injection moulding method combined with anodising , 2021, Surface and Coatings Technology.

[12]  S. Gladkovsky,et al.  Microstructure And Properties Of Layered Metal/RUBBER Composites Subjected To Cyclic AND Impact Loading , 2021, Composite structures.

[13]  Zhanjiang Wang,et al.  A strain rate-dependent cohesive zone model for shear failure of hat-shaped specimens under impact , 2021, Engineering Fracture Mechanics.

[14]  Han Zhao,et al.  Numerical investigation on crack propagation and coalescence induced by dual-borehole blasting , 2021 .

[15]  N. Elvin,et al.  Characterization of adhesive joints under ballistic shear impact , 2021, International Journal of Adhesion and Adhesives.

[16]  M. Kastner,et al.  Modeling and simulation of interface failure in metal-composite hybrids , 2021, 2108.08153.

[17]  Jun Zhao,et al.  Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer–steel structure bonded joints , 2021, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[18]  Q. Cao,et al.  Research on Surface Treatment and Interfacial Bonding Technology of Copper–Polymer Direct Molding Process , 2021, Materials.

[19]  Dongwoo Yoo,et al.  Enhancement of Steel Sandwich Sheet Adhesion Using Mechanical Interlocking Structures Formed by Electrochemical Etching. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[20]  D. Ko,et al.  A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures , 2021, Materials.

[21]  Q. Shen,et al.  Surface treatment and solvent co-assisted easy direct bonding of polymer/metal , 2021 .

[22]  R. Carbas,et al.  The influence of epoxy adhesive toughness on the strength of hybrid laminate adhesive joints , 2021, Applied Adhesion Science.

[23]  M. Rosemeier.  Review for "The effect of resin uptake on the flexural properties of compression molded sandwich composites" , 2020 .

[24]  K. Tan,et al.  Damage and strength analysis of Carbon Fiber Reinforced Polymer and Titanium tubular-lap joint using hybrid adhesive design , 2020 .

[25]  S. Arikawa,et al.  Evaluation of dynamic fracture toughness of a bonded bi-material interface subject to high-strain-rate shearing using digital image correlation , 2020, 2011.04201.

[26]  Qinghua Zhang,et al.  Surface coordination layer passivates oxidation of copper , 2020, Nature.

[27]  A. Moosavi,et al.  A novel and cost-effective method for fabrication of a durable superhydrophobic aluminum surface with self-cleaning properties , 2020, Nanotechnology.

[28]  Xiping Li,et al.  Surface nanostructure and wettability inducing high bonding strength of polyphenylene sulfide-aluminum composite structure , 2020, Applied Surface Science.

[29]  S. Malakooti,et al.  Nanoindentation measurement of core–skin interphase viscoelastic properties in a sandwich glass composite , 2020, Mechanics of Time-Dependent Materials.

[30]  E. Yamaguchi,et al.  Manufacturing aluminum/polybutylene terephthalate direct joints by using hot water–treated aluminum via injection molding , 2020 .

[31]  M. Torkamany,et al.  Laser assisted joining of St12 to polycarbonate: Experimental study and numerical simulation , 2020 .

[32]  Jie Chen,et al.  Impact of Nanoscale Roughness on Heat Transport across the Solid–Solid Interface , 2019, Advanced Materials Interfaces.

[33]  G. D. Magistris,et al.  Role of micrometric roughness on anti-ice properties and durability of hierarchical super-hydrophobic aluminum surfaces , 2019, Surface and Coatings Technology.

[34]  S. Weiss,et al.  Influence of metal surface preparation on the flexural strength and impact damage behaviour of thermoplastic FRP reinforced metal laminate made by press forming , 2019, Composites Part B: Engineering.

[35]  R. Eslami‐Farsani,et al.  Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates , 2019, International Journal of Adhesion and Adhesives.

[36]  Fangwu Ma,et al.  Experimental and numerical investigation on the strength of polymer-metal hybrid with laser assisted metal surface treatment , 2019, Journal of Adhesion Science and Technology.

[37]  Huanran Wang,et al.  Experimental study on fracture process of sintered Nd-Fe-B magnets during dynamic Brazilian tests , 2019, Journal of Magnetism and Magnetic Materials.

[38]  F. Huang,et al.  A novel method in dynamic shear testing of bulk materials using the traditional SHPB technique , 2017 .

[39]  Yongping Chen,et al.  Role of surface roughness on thermal conductance at liquid–solid interfaces , 2014 .

[40]  Willem D. van Driel,et al.  Correlation studies for component level ball impact shear test and board level drop test , 2008, Microelectron. Reliab..

[41]  R. Foley.  Localized Corrosion of Aluminum Alloys—A Review , 1983 .

[42]  T. Suo,et al.  Large deformation mechanical behavior and constitutive modeling of oriented PMMA , 2023, International Journal of Mechanical Sciences.

[43]  Samit Roy,et al.  The Interfacial Shear Strength of Carbon Nanotube Sheet Modified Carbon Fiber Composites , 2021 .

[44]  E. Yamaguchi,et al.  Joining strength dependence on molding conditions and surface textures in blast-assisted metal-polymer direct joining , 2018 .

[45]  Xi Zhang,et al.  Effects of surface treatments and bonding types on the interfacial behavior of fiber metal laminate based on magnesium alloy , 2018 .

[46]  A. K. Mukhopadhyay,et al.  High strain rate compressive behavior of PMMA , 2013, Polymer Bulletin.

[47]  W. Fahrenholtz,et al.  Effect of alkaline cleaning and activation on aluminum alloy 7075-T6 , 2011 .

[48]  S. Petersson,et al.  Nano Molding Technology on Cosmetic Aluminum , 2007 .