A Power-Electronics Free Protection Device For Superconducting Electrical Propulsion Aircraft

Research into developing cryogenic protection devices for superconducting electrical systems is lacking. One of the few investigations was of cryogenic switches in the form of a solid-state circuit breaker. It was reported that these breakers would take up nearly 40% of the superconducting electrical system mass and losses. This paper designs a cryogenic switch, free of power electronics, whose conduction loss is only 4.1% of a comparable solid-state circuit breaker’s total loss. Protection considerations of a 1 kV/40 MW cryogenic system are referred to validate its application in a superconducting electrical powertrain. The designed cryogenic switch’s DC and AC interrupting ability were verified by experiments to interrupt 750 V/1500 A DC and 1 kV/6.3 kA AC, very close to the DC and AC limits of the proposed 40 MW Center for High Efficiency Electric Aircraft (CHEETA) system. For fault conditions, A noninductive pancake resistive superconducting fault current limiter unit was designed to help with the unacceptable fault current. The 750 V/10 kA prospective current was suppressed to 1.4 kA in 588 μs and interrupted by the switch in 12 ms. Cooperation of the cryogenic switch and superconducting fault current limiter show potential in dealing with fault currents in future electric aircraft.