In Situ Studies of the Solidification Dynamics of Metal Alloys

Since the 1990s, tens of 3rd generation synchrotron X-ray facilities have been built around the world and made available for research in almost all scientific disciplines. The high brilliance, high coherence and tunable energy of synchrotron X-rays allow researchers in physical and biological science to probe many new dynamic processes in spatial and temporal resolution that are not possible before. This chapter firstly gives a brief review of the advances of X-ray science and the fundamental laws governing the interactions of X-rays with matter, and then focuses on a critical review and discussion of state of the art real-time and in situ studies of the solidification processes using synchrotron X-rays . The emphasis is on new scientific insights and discoveries in solidification science of metallic alloys, which are enabled by synchrotron X-rays based advanced real-time characterization techniques and the future challenges in this fast advancing research field. Although the knowledge, techniques, and practice described in Chap. 2 are generally in the context of solidification processes, they are applicable to many other materials syntheses and manufacturing processes. Readers are referred to the monographs or books published in the field of synchrotron science for broader topics, knowledge, and practice.

[1]  Zhipeng Guo,et al.  Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach , 2014, J. Comput. Phys..

[2]  S. E. Offerman,et al.  Real-time observation of grain nucleation and growth during solidification of aluminium alloys , 2005 .

[3]  R. A. Harding,et al.  Effects of the entrained surface film on the reliability of castings , 2004 .

[4]  M. De Graef,et al.  The Three-Dimensional Morphology of Growing Dendrites , 2015, Scientific Reports.

[5]  J. Als-Nielsen,et al.  Elements of Modern X-ray Physics: Als-Nielsen/Elements , 2011 .

[6]  Patrick S. Grant,et al.  Phase Field Simulation of Binary Alloy Dendrite Growth Under Thermal- and Forced-Flow Fields: An Implementation of the Parallel–Multigrid Approach , 2013, Metallurgical and Materials Transactions B.

[7]  A. Karma,et al.  Microstructure selection in thin-sample directional solidification of an Al-Cu alloy: In situ X-ray imaging and phase-field simulations , 2017 .

[8]  Peter W Voorhees,et al.  The evolution of dendrites during coarsening: Fragmentation and morphology , 2017 .

[9]  K. Nogita,et al.  In-situ investigation of unidirectional solidification in Sn-0.7Cu and Sn-0.7Cu-0.06Ni , 2011 .

[10]  K. Fezzaa,et al.  High-Speed Synchrotron X-ray Imaging Studies of the Ultrasound Shockwave and Enhanced Flow during Metal Solidification Processes , 2015, Metallurgical and Materials Transactions A.

[11]  Theory of catalysis of nucleation by surface patches , 1953 .

[12]  José Baruchel,et al.  Growth and interaction of dendritic equiaxed grains: In situ characterization by synchrotron X-ray radiography , 2013 .

[13]  Giorgio Margaritondo,et al.  Introduction to synchrotron radiation , 1988 .

[14]  A. Phillion,et al.  In situ X-ray observation of semi-solid deformation and failure in Al–Cu alloys , 2011 .

[15]  M. Suéry,et al.  In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy , 2009 .

[16]  R. Mathiesen,et al.  X-ray radiography observations of columnar dendritic growth and constitutional undercooling in an Al–30wt%Cu alloy , 2005 .

[17]  Kamel Fezzaa,et al.  Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction , 2017, Scientific Reports.

[18]  E. Boller,et al.  Formation of intermetallic δ phase in Al-10Si-0.3Fe alloy investigated by in-situ 4D X-ray synchrotron tomography , 2017 .

[19]  John M Boone,et al.  X-ray imaging physics for nuclear medicine technologists. Part 2: X-ray interactions and image formation. , 2005, Journal of nuclear medicine technology.

[20]  Zhipeng Guo,et al.  On solving the 3-D phase field equations by employing a parallel-adaptive mesh refinement (Para-AMR) algorithm , 2015, Comput. Phys. Commun..

[21]  F. Spinozzi,et al.  Synchrotron Radiation: Basics, Methods and Applications , 2015 .

[22]  R. Mathiesen,et al.  In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy , 2017 .

[23]  A. Phillion,et al.  Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg-Sn alloys , 2016 .

[24]  W. Zhang,et al.  Multi-scale Characterisation of the 3D Microstructure of a Thermally-Shocked Bulk Metallic Glass Matrix Composite , 2016, Scientific Reports.

[25]  C. Rau,et al.  Solidification of Al Alloys Under Electromagnetic Pulses and Characterization of the 3D Microstructures Using Synchrotron X-ray Tomography , 2015, Metallurgical and Materials Transactions A.

[26]  C. Ryan,et al.  Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector , 2018 .

[27]  S. Xiong,et al.  Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling , 2015 .

[28]  J. Hunt,et al.  Hydrogen porosity in directional solidified aluminium-copper alloys:in situ observation , 1997 .

[29]  F. R. Elder,et al.  Radiation from Electrons in a Synchrotron , 1947 .

[30]  Zhipeng Guo,et al.  An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution , 2012, J. Comput. Phys..

[31]  R. Mathiesen,et al.  A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an Al–15Cu alloy , 2014 .

[32]  M. Suéry,et al.  Coarsening mechanisms in a dendritic Al–10% Cu alloy , 2010 .

[33]  A. Phillion,et al.  Revealing dendritic pattern formation in Ni, Fe and Co alloys using synchrotron tomography , 2017 .

[34]  A. Phillion,et al.  Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography , 2017 .

[35]  D. Eskin,et al.  A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing , 2017 .

[36]  B. Büchner,et al.  In situ observations of solidification processes in γ-TiAl alloys by synchrotron radiation , 2010 .

[37]  K. A. Jackson,et al.  Transparent compounds that freeze like metals , 1965 .

[38]  K. Fezzaa,et al.  Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound , 2018 .

[39]  Martin E. Glicksman,et al.  Dendritic growth-A test of theory , 1976 .

[40]  D. Eskin,et al.  3D Characterisation of the Fe-rich intermetallic phases in Al-5%Cu alloys by synchrotron X-ray microtomography and skeletonisation , 2017, 1712.04102.

[41]  K. Pericleous,et al.  4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification , 2016 .

[42]  H. Nguyen-Thi,et al.  In situ observation of solidification patterns in diffusive conditions , 2016 .

[43]  J. Mi,et al.  Entrained oxide films in TiAl castings , 2003 .

[44]  C. Nicklin,et al.  In situ observation of the orientation relationship at the interface plane between substrate and nucleus using X-ray scattering techniques , 2014 .

[45]  M. Hanfland,et al.  Electromagnetic levitation apparatus for investigations of the phase selection in undercooled melts by energy-dispersive x-ray diffraction , 2000 .

[46]  P. Voorhees,et al.  The dynamics of interfaces during coarsening in solid–liquid systems , 2014 .

[47]  Timm Weitkamp,et al.  Time Resolved X-Ray Imaging of Dendritic Growth in Binary Alloys , 1999 .

[48]  W. Tiller,et al.  The redistribution of solute atoms during the solidification of metals , 1953 .

[49]  J. Baruchel,et al.  Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification , 2011 .

[50]  M. Suéry,et al.  On the interest of synchrotron X-ray imaging for the study of solidification in metallic alloys , 2012 .

[51]  Baode Sun,et al.  A High-Speed Imaging and Modeling Study of Dendrite Fragmentation Caused by Ultrasonic Cavitation , 2012, Metallurgical and Materials Transactions A.

[52]  M. O'Keefe,et al.  Intensity of diffracted intensities , 2006 .

[53]  R. A. Harding,et al.  The tilt casting process , 2002 .

[54]  R. Mathiesen,et al.  Heterogeneous nucleation and grain growth of inoculated aluminium alloys: An integrated study by in-situ X-radiography and numerical modelling , 2017 .

[55]  J. Mi,et al.  In Situ Synchrotron X-ray Study of Ultrasound Cavitation and Its Effect on Solidification Microstructures , 2015, Metallurgical and Materials Transactions B.

[56]  J. Hunt,et al.  Hydrogen porosity in directionally solidified aluminium–copper alloys: a mathematical model , 2001 .

[57]  M. Suéry,et al.  In situ study of nucleation and growth of the irregular alpha-Al/beta-Al5FeSi eutectic by 3-D synchrotron X-ray microtomography , 2010 .

[58]  Shyamprasad Karagadde,et al.  In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al-Cu alloy , 2014 .