Crystal-structure of active layers of small molecule organic photovoltaics before and after solvent vapor annealing
暂无分享,去创建一个
C. Brabec | Ella M Schmidt | G. Duesberg | S. Langner | T. Unruh | E. Spiecker | J. Will | R. Neder | M. Berlinghof | A. Prihoda | Christina Harreiss | Chen Shen | S. Rechberger | R. Siris | T. Schindler | F. Bertram | E. Schmidt
[1] A. Karim,et al. Comparative solvent quality dependent crystallization in solvent vapor annealing of P3HT:PCBM thin films by in-situ GIWAXS , 2019, Polymer.
[2] S. Roth,et al. Composition-Morphology Correlation in PTB7-Th/PC71BM Blend Films for Organic Solar Cells. , 2019, ACS applied materials & interfaces.
[3] C. Brabec,et al. Flexible sample cell for real-time GISAXS, GIWAXS and XRR: design and construction. , 2018, Journal of synchrotron radiation.
[4] Jianqi Zhang,et al. Critical Role of Vertical Phase Separation in Small-Molecule Organic Solar Cells. , 2018, ACS applied materials & interfaces.
[5] Origin of Reduced Open-Circuit Voltage in Highly Efficient Small-Molecule-Based Solar Cells upon Solvent Vapor Annealing. , 2018, ACS applied materials & interfaces.
[6] T. Koganezawa,et al. Effects of solvent vapor annealing on organic photovoltaics with a new type of solution-processable oligothiophene-based electronic donor material , 2016, Japanese Journal of Applied Physics.
[7] C. Brabec,et al. Gaining further insight into the effects of thermal annealing and solvent vapor annealing on time morphological development and degradation in small molecule solar cells , 2017 .
[8] C. Brabec,et al. In situ characterization methods for evaluating microstructure formation and drying kinetics of solution-processed organic bulk-heterojunction films , 2017 .
[9] C. Brabec,et al. Controlling additive behavior to reveal an alternative morphology formation mechanism in polymer: Fullerene bulk-heterojunctions , 2016 .
[10] C. Brabec,et al. High efficiency and stability small molecule solar cells developed by bulk microstructure fine-tuning , 2016 .
[11] Christoph J. Brabec,et al. Time‐Dependent Morphology Evolution of Solution‐Processed Small Molecule Solar Cells during Solvent Vapor Annealing , 2016 .
[12] M. Schindler,et al. Investigation of morphological degradation of P3HT:PCBM bulk heterojunction films exposed to long-term host solvent vapor , 2016 .
[13] C. Brabec,et al. Real‐Time Investigation of Intercalation and Structure Evolution in Printed Polymer:Fullerene Bulk Heterojunction Thin Films , 2016 .
[14] Yongsheng Chen,et al. A solution-processed high performance organic solar cell using a small molecule with the thieno[3,2-b]thiophene central unit. , 2015, Chemical communications.
[15] Yongsheng Chen,et al. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency. , 2015, Journal of the American Chemical Society.
[16] S. Roth,et al. Development of the morphology during functional stack build-up of P3HT:PCBM bulk heterojunction solar cells with inverted geometry. , 2015, ACS applied materials & interfaces.
[17] Fei Huang,et al. Small-molecule solar cells with efficiency over 9% , 2014, Nature Photonics.
[18] Yueh-Lin Loo,et al. The Diffraction Pattern Calculator (DPC) toolkit: a user-friendly approach to unit-cell lattice parameter identification of two-dimensional grazing-incidence wide-angle X-ray scattering data. , 2014, Journal of applied crystallography.
[19] Manfred Burghammer,et al. A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering , 2014, Journal of applied crystallography.
[20] Wallace W. H. Wong,et al. The role of solvent vapor annealing in highly efficient air-processed small molecule solar cells , 2014 .
[21] P. Müller‐Buschbaum,et al. Influence of the Position of the Side Chain on Crystallization and Solar Cell Performance of DPP-Based Small Molecules , 2014 .
[22] John R. Tumbleston,et al. The Importance of Fullerene Percolation in the Mixed Regions of Polymer–Fullerene Bulk Heterojunction Solar Cells , 2013 .
[23] Thuc‐Quyen Nguyen,et al. Molecular solubility and hansen solubility parameters for the analysis of phase separation in bulk heterojunctions , 2012 .
[24] S. Mannsfeld,et al. Quantitative determination of organic semiconductor microstructure from the molecular to device scale. , 2012, Chemical reviews.
[25] H. Schulte-Schrepping,et al. The high-resolution diffraction beamline P08 at PETRA III. , 2012, Journal of synchrotron radiation.
[26] Shuai Guo,et al. Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics , 2011 .
[27] A. Liu,et al. Advances in Planar Lipid Bilayers and Liposomes , 2011 .
[28] K. Nagao,et al. X-ray thin film measurement techniques VII . Pole figure measurement , 2011 .
[29] Annabel Sebag. ED , 2009, SIGGRAPH '09.
[30] Ligui Li,et al. Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution , 2008 .
[31] G. Malliaras,et al. Efficient solution-processed photovoltaic cells based on an anthradithiophene/fullerene blend. , 2007, Journal of the American Chemical Society.
[32] J. Fattebert,et al. Stacking of oligo- and polythiophene cations in solution: surface tension and dielectric saturation. , 2005, The Journal of chemical physics.
[33] N. Marzari,et al. π-Stacking in charged thiophene oligomers , 2004 .
[34] Brian A. Gregg,et al. Evolution of Photophysical and Photovoltaic Properties of Perylene Bis(phenethylimide) Films upon Solvent Vapor Annealing , 1996 .