BIOTC: An open-source CFD code for simulating biomass fast pyrolysis

[1]  S. Kong,et al.  Assessment of devolatilization schemes in predicting product yields of biomass fast pyrolysis , 2014 .

[2]  Weihong Yang,et al.  Computational fluid dynamics modeling of biomass fast pyrolysis in a fluidized bed reactor, using a comprehensive chemistry scheme , 2014 .

[3]  Khai Ching Ng,et al.  Laminar mixing performances of baffling, shaft eccentricity and unsteady mixing in a cylindrical vessel , 2013 .

[4]  Jam Hans Kuipers,et al.  Detailed numerical simulation of an intruder impacting on a granular bed using a hybrid discrete particle and immersed boundary (DP-IB) method , 2013 .

[5]  Hongpeng Liu,et al.  CFD simulation of hydrodynamics on the dense zone on a 65 t/h oil shale-fired high–low bed CFB boiler , 2013 .

[6]  S. Kong,et al.  Modeling Effects of Operating Conditions on Biomass Fast Pyrolysis in Bubbling Fluidized Bed Reactors , 2013 .

[7]  A. Lohi,et al.  A novel and energy-efficient coaxial mixer for agitation of non-Newtonian fluids possessing yield stress , 2013 .

[8]  J. Lédé,et al.  Novel vertical image furnace for fast pyrolysis studies , 2013 .

[9]  Shuyan Wang,et al.  Study of hydrodynamic characteristics of particles in liquid–solid fluidized bed with uniform transverse magnetic field , 2013 .

[10]  Xiaosong Sun,et al.  Three-dimensional simulation of a solid-liquid flow by the DEM-SPH method , 2013, J. Comput. Phys..

[11]  Weihong Yang,et al.  An Euler–Euler approach to modeling biomass fast pyrolysis in fluidized-bed reactors – Focusing on the gas phase , 2013 .

[12]  Goodarz Ahmadi,et al.  CFD simulation of cylindrical spouted beds by the kinetic theory of granular flow , 2013 .

[13]  Kun Luo,et al.  Fully-resolved DNS study of rotation behaviors of one and two particles settling near a vertical wall , 2013 .

[14]  Song-Charng Kong,et al.  Development of a generalized numerical framework for simulating biomass fast pyrolysis in fluidize , 2013 .

[15]  Jennifer R. Lukes,et al.  A hybrid atomistic-continuum model for fluid flow using LAMMPS and OpenFOAM , 2013, Comput. Phys. Commun..

[16]  Mohand Tazerout,et al.  Modelling of an indirectly heated fixed bed pyrolysis reactor of wood: Transition from batch to continuous staged gasification , 2013 .

[17]  Ji Xu,et al.  Efficient 3D DNS of gas–solid flows on Fermi GPGPU , 2012 .

[18]  Guy Marin,et al.  Modeling fast biomass pyrolysis in a gas/solid vortex reactor , 2012 .

[19]  Kai H. Luo,et al.  Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor , 2012 .

[20]  Tingwen Li,et al.  CFD-DEM study of effect of bed thickness for bubbling fluidized beds , 2012 .

[21]  R. Fox,et al.  Experimental validation and CFD modeling study of biomass fast pyrolysis in fluidized-bed reactors , 2012 .

[22]  Ge Wei,et al.  Efficient parallel implementation of the lattice Boltzmann method on large clusters of graphic processing units , 2012 .

[23]  P. Mtui,et al.  CFD modeling of space-time evolution of fast pyrolysis products in a bench-scale fluidized-bed reactor , 2012 .

[24]  R. Xiao,et al.  Numerical Study on the Hydrodynamics of a Self-Heating Biomass Fast Pyrolysis Reactor , 2011 .

[25]  Theodore J. Heindel,et al.  A CFD model for biomass fast pyrolysis in fluidized-bed reactors , 2010 .

[26]  Wei Ge,et al.  Large-scale DNS of gas-solid flows on Mole-8.5 , 2010, 1011.2613.

[27]  Susanna Nilsson,et al.  Devolatilization of wood and wastes in fluidized bed , 2010 .

[28]  Wei Ge,et al.  Direct numerical simulation of sub-grid structures in gas―solid flow: GPU implementation of macro-scale pseudo-particle modeling , 2010 .

[29]  J. Abedi,et al.  A simplified model for biomass pyrolysis in a fluidized bed reactor , 2010 .

[30]  Rui Sun,et al.  Experimental and numerical study of biomass flash pyrolysis in an entrained flow reactor. , 2010, Bioresource technology.

[31]  Larry L. Baxter,et al.  Effects of particle shape and size on devolatilization of biomass particle , 2010 .

[32]  H. Baum,et al.  Experimental and theoretical investigation of heat and mass transfer processes during wood pyrolysis , 2010 .

[33]  Enrico Biagini,et al.  Evaluation of global biomass devolatilization kinetics in a drop tube reactor with CFD aided experiments , 2009 .

[34]  H. Choi,et al.  Numerical study of fast pyrolysis of woody biomass in a gravity‐driven reactor , 2009 .

[35]  Wei Wang,et al.  Searching for a mesh-independent sub-grid model for CFD simulation of gas–solid riser flows , 2009 .

[36]  Sai Gu,et al.  CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors: modelling the impact of biomass shrinkage. , 2009 .

[37]  L. Fiori,et al.  Experimental and modeling analysis of a batch gasification/pyrolysis reactor , 2009 .

[38]  Eliseo Ranzi,et al.  Biomass pyrolysis: kinetic modelling and experimental validation under high temperature and flash heating rate conditions. , 2009 .

[39]  Mohand Tazerout,et al.  Dimensional modelling of wood pyrolysis using a nodal approach , 2008 .

[40]  Anthony V. Bridgwater,et al.  CFB air-blown flash pyrolysis. Part I: Engineering design and cold model performance , 2007 .

[41]  Prakash Saha,et al.  Deviation , 2006, BMJ : British Medical Journal.

[42]  Jan Vierendeels,et al.  Extension and evaluation of the integral model for transient pyrolysis of charring materials , 2005 .

[43]  Kefa Cen,et al.  A model of wood flash pyrolysis in fluidized bed reactor , 2005 .

[44]  Francine Battaglia,et al.  Simulations of multiphase reactive flows in fluidized beds using in situ adaptive tabulation , 2004 .

[45]  B. Babu,et al.  Heat transfer and kinetics in the pyrolysis of shrinking biomass particle , 2004 .

[46]  B. Peters,et al.  Drying and pyrolysis of wood particles: experiments and simulation , 2003 .

[47]  Josette Bellan,et al.  Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed , 2001 .

[48]  J. Bellan,et al.  Yield Optimization and Scaling of Fluidized Beds for Tar Production from Biomass , 2001 .

[49]  D. Mason,et al.  A computational investigation of transient heat transfer in pneumatic transport of granular particles , 2000 .

[50]  J. Bellan,et al.  A Generalized Biomass Pyrolysis Model Based on Superimposed Cellulose, Hemicelluloseand Liqnin Kinetics , 1997 .

[51]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[52]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[53]  D. Gunn.  Transfer of heat or mass to particles in fixed and fluidised beds , 1978 .

[54]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .

[55]  Pietro Asinari,et al.  An Open-Source Library for the Numerical Modeling of Mass-Transfer in Solid-Oxide Fuel Cells , 2015 .

[56]  Hugo A. Jakobsen,et al.  Multi-scale modeling of fixed-bed thermo-chemical processes of biomass with the representative particle model: Application to pyrolysis , 2013 .

[57]  B. G. M. van Wachem,et al.  Tar formation variations during fluidised bed pyrolytic biomass conversion , 2013 .

[58]  Anh N. Phan,et al.  Mathematical modelling of slow pyrolysis of segregated solid wastes in a packed-bed pyrolyser , 2007 .

[59]  Olivier Boutin,et al.  Flash pyrolysis of cellulose pellets submitted to a concentrated radiation: experiments and modelling , 2002 .

[60]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .