Analysing RMS and peak values of vibration signals for condition monitoring of wind turbine gearboxes

Wind turbines (WTs) are designed to operate under extreme environmental conditions. This means that extreme and varying loads experienced by WT components need to be accounted for as well as gaining access to wind farms (WFs) at different times of the year. Condition monitoring (CM) is used by WF owners to assess WT health by detecting gearbox failures and planning for operations and maintenance (O&M). However, there are several challenges and limitations with commercially available CM technologies – ranging from the cost of installing monitoring systems to the ability to detect faults accurately. This study seeks to address some of these challenges by developing novel techniques for fault detection using the RMS and Extreme (peak) values of vibration signals. The proposed techniques are based on three models (signal correlation, extreme vibration, and RMS intensity) and have been validated with a time domain data driven approach using CM data of operational WTs. The findings of this study show that monitoring RMS and Extreme values serves as a leading indicator for early detection of faults using Extreme value theory, giving WF owners time to schedule O&M. Furthermore, it also indicates that the prediction accuracy of each CM technique depends on the physics of failure. This suggests that an approach which incorporates the strengths of multiple techniques is needed for holistic health assessment of WT components.

[1]  L. Bertling,et al.  Reliability-Centered Maintenance for Wind Turbines Based on Statistical Analysis and Practical Experience , 2012, IEEE Transactions on Energy Conversion.

[2]  Yue Wang,et al.  Supervisory control and data acquisition data-based non-linear state estimation technique for wind turbine gearbox condition monitoring , 2013 .

[3]  Peter Matthews,et al.  Prognosis of wind turbine gearbox failures by utilising robust multivariate statistical techniques , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[4]  Yingning Qiu,et al.  Use of SCADA and CMS signals for failure detection and diagnosis of a wind turbine gearbox , 2011 .

[5]  Huageng Luo,et al.  Effective and accurate approaches for wind turbine gearbox condition monitoring , 2014 .

[6]  Paula J. Dempsey,et al.  Investigation of data fusion applied to health monitoring of wind turbine drivetrain components , 2013 .

[7]  Andrew Kusiak,et al.  The prediction and diagnosis of wind turbine faults , 2011 .

[8]  Jan Pierik,et al.  Grid Interaction of Offshore Wind Farms. Part 1. Models for Dynamic Simulation , 2005 .

[9]  W. Rice.  ANALYZING TABLES OF STATISTICAL TESTS , 1989, Evolution; international journal of organic evolution.

[10]  Ali S. Hadi,et al.  Extreme Value and Related Models with Applications in Engineering and Science , 2004 .

[11]  Junda Zhu,et al.  Survey of Condition Indicators for Condition Monitoring Systems (Open Access) , 2014 .

[12]  Sofiane Achiche,et al.  Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 1: System description , 2013, Appl. Soft Comput..

[13]  Lei Deng,et al.  Fault diagnosis for a wind turbine transmission system based on manifold learning and Shannon wavelet support vector machine , 2014 .

[14]  A. Kusiak,et al.  Monitoring Wind Farms With Performance Curves , 2013, IEEE Transactions on Sustainable Energy.

[15]  Yingning Qiu,et al.  Wind turbine condition monitoring: technical and commercial challenges , 2014 .

[16]  Torgeir Moan,et al.  A prognostic method for fault detection in wind turbine drivetrains , 2014 .

[17]  Shuangwen Sheng,et al.  Wind Turbine Gearbox Condition Monitoring Round Robin Study - Vibration Analysis , 2012 .

[18]  Radislav Smid,et al.  Condition Indicators for Gearbox Condition Monitoring Systems , 2005 .

[19]  Mayorkinos Papaelias,et al.  Condition monitoring of wind turbines: Techniques and methods , 2012 .

[20]  P.J. Tavner,et al.  Extracting condition monitoring information from a wind turbine drive train , 2004, 39th International Universities Power Engineering Conference, 2004. UPEC 2004..

[21]  Peter Tavner,et al.  Condition monitoring algorithm suitable for wind turbine use , 2011 .

[22]  Wenxian Yang,et al.  Cost-Effective Condition Monitoring for Wind Turbines , 2010, IEEE Transactions on Industrial Electronics.

[23]  Peter Tavner,et al.  Study of weather and location effects on wind turbine failure rates , 2013 .

[24]  Yingning Qiu,et al.  Monitoring wind turbine gearboxes , 2013 .

[25]  Robert X. Gao,et al.  An Integrative Computational Method for Gearbox Diagnosis , 2012 .

[26]  Kathryn E. Johnson.  Adaptive Torque Control of Variable Speed Wind Turbines , 2004 .

[27]  F. Oyague,et al.  NREL Gearbox Reliability Collaborative Experimental Data Overview and Analysis: Preprint , 2010 .

[28]  Christopher Durugbo,et al.  Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes , 2015 .

[29]  Robert X. Gao,et al.  Integration of EEMD and ICA for wind turbine gearbox diagnosis , 2014 .

[30]  Jian Li,et al.  Normal Behavior Models for the Condition Assessment of Wind Turbine Generator Systems , 2014 .

[31]  Matthew J. Watson,et al.  Robust wind turbine gearbox fault detection , 2014 .

[32]  Eric P. Smith,et al.  An Introduction to Statistical Modeling of Extreme Values , 2002, Technometrics.

[33]  Christopher Durugbo,et al.  Through-life engineering services: A wind turbine perspective , 2014 .

[34]  Huairui Guo,et al.  Managing wind turbine reliability and maintenance via performance-based contract , 2012, PES 2012.

[35]  Sung-Hoon Ahn,et al.  Condition monitoring and fault detection of wind turbines and related algorithms: A review , 2009 .

[36]  Andrew Kusiak,et al.  Analyzing bearing faults in wind turbines: A data-mining approach , 2012 .

[37]  Slim Soua,et al.  Determination of the combined vibrational and acoustic emission signature of a wind turbine gearbox and generator shaft in service as a pre-requisite for effective condition monitoring , 2013 .

[38]  Yingning Qiu,et al.  Wind turbine SCADA alarm analysis for improving reliability , 2012 .

[39]  AchicheSofiane,et al.  Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 1 , 2013 .

[40]  Jan Pierik,et al.  Grid interaction of offshore wind farms. Part 2. Case study simulations , 2005 .

[41]  Nan Bai,et al.  Wind Turbine Gearbox Condition Monitoring with AAKR and Moving Window Statistic Methods , 2011 .

[42]  Wenxian Yang,et al.  Experimental study on the optimum time for conducting bearing maintenance , 2013 .

[43]  Paul Fleming,et al.  Use of SCADA Data for Failure Detection in Wind Turbines , 2011 .

[44]  Yanhui Feng,et al.  Reliability Analysis and Prediction of Wind Turbine Gearboxes , 2010 .

[45]  E. Castillo.  Extreme value and related models with applications in engineering and science , 2005 .

[46]  Wenxian Yang,et al.  Wind turbine condition monitoring by the approach of SCADA data analysis , 2013 .

[47]  Mengyan Nie,et al.  Review of condition monitoring and fault diagnosis technologies for wind turbine gearbox , 2013 .

[48]  Michael Wilkinson,et al.  Comparison of methods for wind turbine condition monitoring with SCADA data , 2014 .

[49]  T. Thorarinsdottir,et al.  Forecast verification for extreme value distributions with an application to probabilistic peak wind prediction , 2012, 1204.1022.