Electrical and piezoresistive sensing capacities of cement paste with multi-walled carbon nanotubes

Abstract This study examined the feasibility of using multi-walled carbon nanotubes (MWCNTs) in cement paste for piezoresistive sensors. Two types of MWCNTs with different carbon content (>90% and >99%) were incorporated into cement paste at 1% by weight of binder (1 wt%). Plain cement paste and cement composites including 1 wt% graphite nanofiber (GNF) and graphene (G) were also considered for comparisons of the electrical conductivity. The test results indicate that the MWCNTs more effectively improved the conductivity of the cement paste than GNF and G. In addition, composites with MWCNTs with lower flowability had less resistivity than those with higher flowability. The size effect in electrical resistivity was observed in the cement pastes with and without the carbon-based nanomaterials, but it was mitigated by incorporating MWCNTs in the cement paste. The stresses and strains under cyclic compression and monotonic tension were well simulated by the measured fraction change in the resistivity of the composites with 1 wt% MWCNTs. The gauge factor (GF) for the composites with 1 wt% MWCNTs was higher than that of commercially available strain gauges, and it was affected by the loading condition: a higher GF obtained under compression than under tension.

[1]  Maria S. Konsta-Gdoutos,et al.  Self sensing carbon nanotube (CNT) and nanofiber (CNF) cementitious composites for real time damage assessment in smart structures , 2014 .

[2]  Sihai Wen,et al.  A comparative study of steel- and carbon-fibre cement as piezoresistive strain sensors , 2003 .

[3]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[4]  Filippo Ubertini,et al.  Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications , 2016 .

[5]  G. Ryu,et al.  Mitigating shrinkage cracking in posttensioning grout using shrinkage-reducing admixture , 2017 .

[6]  P. K. Mehta,et al.  Concrete: Microstructure, Properties, and Materials , 2005 .

[7]  M. Pigeon,et al.  Electrical resistivity of carbon and steel micro-fiber reinforced cements , 1992 .

[8]  Jia-Liang Le,et al.  Use of 2D Graphene Nanoplatelets (GNP) in cement composites for structural health evaluation , 2014 .

[9]  J. Beaudoin,et al.  Electrical percolation phenomena in cement composites containing conductive fibres , 1996, Journal of Materials Science.

[10]  Alison B. Flatau,et al.  Review Paper: Health Monitoring of Civil Infrastructure , 2003 .

[11]  Quan Wang,et al.  An investigation on the aeroelastic flutter characteristics of FG-CNTRC beams in the supersonic flow , 2017 .

[12]  Quan Wang,et al.  A numerical study on flow-induced instabilities of supersonic FG-CNT reinforced composite flat panels in thermal environments , 2017 .

[13]  Influence of superplasticizer on the rheology of fresh cement asphalt paste , 2015 .

[14]  Eil Kwon,et al.  A carbon nanotube/cement composite with piezoresistive properties , 2009 .

[15]  Sihai Wen,et al.  Electromagnetic interference shielding reaching 70 dB in steel fiber cement , 2004 .

[16]  Bing Chen,et al.  Conductivity of carbon fiber reinforced cement-based composites , 2004 .

[17]  Victor C. Li,et al.  Rheology, fiber dispersion, and robust properties of Engineered Cementitious Composites , 2013 .

[18]  Hamed Asadi,et al.  Numerical simulation of the fluid-solid interaction for CNT reinforced functionally graded cylindrical shells in thermal environments , 2017 .

[19]  Jinping Ou,et al.  Effect of water content on the piezoresistivity of MWNT/cement composites , 2010 .

[20]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[21]  Amin Abrishambaf,et al.  Relation between fibre distribution and post-cracking behaviour in steel fibre reinforced self-compacting concrete panels , 2013 .

[22]  Sihai Wen,et al.  Effects of strain and damage on strain-sensing ability of carbon fiber cement , 2006 .

[23]  Hui Li,et al.  Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites , 2006 .

[24]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.

[25]  Habeom Lee,et al.  Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites , 2016 .

[26]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[27]  Simon A. Austin,et al.  Flexural strain and crack width measurement of steel-fibre-reinforced concrete by optical grid and electrical gauge methods , 2001 .

[28]  Filippo Ubertini,et al.  Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications , 2017 .

[29]  Ilhwan You,et al.  Electrical Properties of Cement-Based Composites with Carbon Nanotubes, Graphene, and Graphite Nanofibers , 2017, Sensors.

[30]  M. Naraghi,et al.  Strong carbon nanofibers from electrospun polyacrylonitrile , 2011 .

[31]  Dong Qian,et al.  Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements , 2003 .

[32]  Egemen Teomete,et al.  Transverse strain sensitivity of steel fiber reinforced cement composites tested by compression and split tensile tests , 2014 .

[33]  D.D.L. Chung,et al.  Improving the electrical conductivity of composites comprised of short conducting fibers in a nonconducting matrix: The addition of a nonconducting particulate filler , 1995 .

[34]  Nemkumar Banthia,et al.  Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing , 2012 .

[35]  Qiang Zhang,et al.  Carbon nanotube mass production: principles and processes. , 2011, ChemSusChem.