Thermoelastic stress analysis of damage mechanisms in composite materials

[1]  William Thomson,et al.  XV.— On the Dynamical Theory of Heat, with numerical results deduced from Mr Joule's Equivalent of a Thermal Unit, and M. Regnault's Observations on Steam , 1853 .

[2]  Isaac M Daniel,et al.  Stress and failure analysis of a glass-epoxy composite plate with a circular hole , 1973 .

[3]  Zvi Hashin,et al.  Failure Modes of Angle Ply Laminates , 1975 .

[4]  Z. Hashin,et al.  Fatigue failure of angle ply laminates , 1976 .

[5]  A. Rotem,et al.  Fatigue Failure of Multidirectional Laminate , 1979 .

[6]  G. Sendeckyj,et al.  Damage documentation in composites by stereo radiography , 1982 .

[7]  Kenneth Reifsnider,et al.  An Investigation of Cumulative Damage Development in Quasi-Isotropic Graphite/Epoxy Laminates , 1982 .

[8]  Leif A. Carlsson,et al.  Interlaminar Stresses at a Hole in a Composite Member Subjected to In-Plane Loading , 1983 .

[9]  H. Hoersch,et al.  Composite Materials: Fatigue and Fracture , 1986 .

[10]  K. Reifsnider,et al.  Internal Load Distribution Effects During Fatigue Loading of Composite Laminates , 1986 .

[11]  Ramesh Talreja,et al.  Fatigue of composite materials , 1987 .

[12]  C. Sun,et al.  Failure of Quasi-Isotropic Composite Laminates with Free Edges , 1988 .

[13]  P. Stanley,et al.  The application of thermoelastic stress analysis techniques to composite materials , 1988 .

[14]  Gerard Franklyn Fernando,et al.  Fatigue behaviour of carbon fibre reinforced plastics , 1990 .

[15]  George Z. Voyiadjis,et al.  Damage in composite materials , 1993 .

[16]  Isaac M Daniel,et al.  Engineering Mechanics of Composite Materials , 1994 .

[17]  J. M. Dulieu-Smith Alternative calibration techniques for quantitative thermoelastic stress analysis , 1995 .

[18]  Constantinos Soutis,et al.  Interlaminar stresses in composite laminates with a circular hole , 1997 .

[19]  Image enhancement and stress separation of thermoelastically measured data under random loading , 1997 .

[20]  P Stanley,et al.  Development and applications of thermoelastic stress analysis , 1998 .

[21]  C. Sun,et al.  Influence of Ply Orientation on Delamination in Composite Laminates , 1996, Aerospace.

[22]  J. M. Dulieu-Barton,et al.  Applications of thermoelastic stress analysis to composite materials , 1999 .

[23]  J. Dulieu‐Barton,et al.  On the Thermoelastic Analysis of Impact Damage on Foam-Cored Sandwich-Construction Composites , 1999 .

[24]  P. Brøndsted,et al.  Fatigue Dissipation and Failure in Unidirectional and Angle-Ply Glass Fibre/Carbon Fibre Hybrid Laminates , 2001 .

[25]  J. Rebiere,et al.  Initiation and growth of transverse and longitudinal cracks in composite cross-ply laminates , 2001 .

[26]  Wim Van Paepegem,et al.  Fatigue damage modeling of fibre-reinforced composite materials: Review , 2001 .

[27]  R. Shenoi,et al.  Thermoelastic Characterisation of Damage Around a Circular Hole in a GRP Component , 2001 .

[28]  Jean-Noël Périé,et al.  Analysis of a multiaxial test on a C/C composite by using digital image correlation and a damage model , 2002 .

[29]  G. Pitarresi,et al.  A review of the general theory of thermoelastic stress analysis , 2003 .

[30]  James F. Newill,et al.  Predicting the Nonlinear Response and Failure of Composite Laminates: Correlation With Experimental Results , 2004 .

[31]  R. A. Shenoi,et al.  A two-stage theory on fatigue damage and life prediction of composites , 2004 .

[32]  E. Patterson,et al.  Measuring stress intensity factors during fatigue crack growth using thermoelasticity , 2004 .

[33]  G. N. Labeas,et al.  Fatigue damage accumulation and residual strength assessment of CFRP laminates , 2004 .

[34]  Michel Grédiac,et al.  The use of full-field measurement methods in composite material characterization: interest and limitations , 2004 .

[35]  J. Dulieu‐Barton,et al.  Progress in Thermoelastic Residual Stress Measurement , 2004 .

[36]  D. Mollenhauer,et al.  Theoretical and experimental investigation of stress redistribution in open hole composite laminates due to damage accumulation , 2005 .

[37]  Isaac M Daniel,et al.  Failure of Composite Materials , 2007 .

[38]  Janice M. Dulieu-Barton,et al.  A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment , 2006 .

[39]  A. Tounsi,et al.  Effect of transverse cracks on the mechanical properties of angle-ply composites laminates , 2006 .

[40]  D. Mollenhauer,et al.  Examination of ply cracking in composite laminates with open holes: A moiré interferometric and numerical study , 2006 .

[41]  R. Talreja Damage analysis for structural integrity and durability of composite materials , 2006 .

[42]  Michael R Wisnom,et al.  Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part II: experimental results , 2007 .

[43]  Michael R Wisnom,et al.  Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: Methodology , 2007 .

[44]  P. Cunningham,et al.  A generalised approach to the calibration of orthotropic materials for thermoelastic stress analysis , 2008 .