The application of rapid prototyping in prosthodontics.
暂无分享,去创建一个
[1] L. Shaw,et al. Microstructure of dental porcelains in a laser-assisted rapid prototyping process. , 2005, Dental materials : official publication of the Academy of Dental Materials.
[2] Michael J. Cima,et al. Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .
[3] E. Sachs,et al. Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell. , 2000, Journal of biomedical materials research.
[4] Richard Bibb,et al. Use of CAD/CAM technology to fabricate a removable partial denture framework. , 2006, The Journal of prosthetic dentistry.
[5] M. J. Edirisinghe,et al. Solid freeform fabrication of ceramics , 2003 .
[6] L. Froyen,et al. Selective laser melting of iron-based powder , 2004 .
[7] Andrea Gatto,et al. 3D Printing technique applied to Rapid Casting , 2007 .
[8] D Eggbeer,et al. The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[9] Gianfranco Gassino,et al. CAD/CAM ear model and virtual construction of the mold. , 2007, The Journal of prosthetic dentistry.
[10] T. Murakami,et al. Drainage phenomenon of pastes during extrusion , 2000 .
[11] Fu-qiang Zhang,et al. Nasal prosthesis rehabilitation using CAD-CAM technology after total rhinectomy: a pilot study , 2011, Supportive Care in Cancer.
[12] W A Kalender,et al. Rapid protyping technology in medicine--basics and applications. , 1999, Computerized medical imaging and graphics : the official journal of the Computerized Medical Imaging Society.
[13] Takashi Miyazaki,et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. , 2009, Dental materials journal.
[14] Richard Bibb,et al. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. , 2004, The Journal of prosthetic dentistry.
[15] Chi-Mun Cheah,et al. Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: Development of molding techniques for casting prosthetic parts. , 2003, The International journal of prosthodontics.
[16] S. Swann. Integration of MRI and stereolithography to build medical models: a case study , 1996 .
[17] L. Shaw,et al. Solid freeform fabrication of permanent dental restorations via slurry micro-extrusion , 2006 .
[18] N Kawahata,et al. Trial of duplication procedure for complete dentures by CAD/CAM. , 1997, Journal of oral rehabilitation.
[19] J. Binner,et al. Coagulation of electrosterically dispersed concentrated alumina suspensions for paste production , 2000 .
[20] Manabu Kanazawa,et al. Trial of a CAD/CAM system for fabricating complete dentures. , 2011, Dental materials journal.
[21] L. Shaw,et al. Optimization of the cross section geometry of laser‐densified dental porcelain bodies for rapid prototyping processes , 2005 .
[22] Ming C. Leu,et al. Rapid prototyping in dentistry: technology and application , 2006 .
[23] Chee Kai Chua,et al. Rapid prototyping assisted surgery planning , 1998 .
[24] H. Fischer,et al. Direct Inkjet Printing of Dental Prostheses Made of Zirconia , 2009, Journal of dental research.
[25] Leanne M Sykes,et al. Applications of rapid prototyping technology in maxillofacial prosthetics. , 2004, The International journal of prosthodontics.
[26] S. Nikzad,et al. The evolution of rapid prototyping in dentistry: a review , 2009 .
[27] A. Amis,et al. Rapid prototyping for orthopaedic surgery , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[28] P A Webb,et al. A review of rapid prototyping (RP) techniques in the medical and biomedical sector , 2000, Journal of medical engineering & technology.
[29] R. Jamieson,et al. How rapid prototyping can assist in the development of new orthopaedic products ‐ a case study , 1995 .
[30] Rainer Telle,et al. Development of high solid content aqueous 3Y-TZP suspensions for direct inkjet printing using a thermal inkjet printer , 2009 .
[31] Yong Wang,et al. A preliminary report of designing removable partial denture frameworks using a specifically developed software package. , 2010, The International journal of prosthodontics.
[32] L H Chen,et al. A CAD/CAM technique for fabricating facial prostheses: a preliminary report. , 1997, The International journal of prosthodontics.
[33] M Okada,et al. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. , 1994, The International journal of prosthodontics.
[34] L. Froyen,et al. Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .
[35] Carsten Thomas,et al. Optical data acquisition for computer-assisted design of facial prostheses. , 2002, The International journal of prosthodontics.
[36] R. W. Günther,et al. Pediatric craniofacial surgery: Comparison of milling and stereolithography for 3D model manufacturing , 2005, Pediatric Radiology.
[37] Yong Wang,et al. Study on CAD&RP for removable complete denture , 2009, Comput. Methods Programs Biomed..
[38] Thierry Chartier,et al. 3D fine scale ceramic components formed by ink-jet prototyping process , 2005 .
[39] H Spiekermann,et al. Application of laser measuring, numerical simulation and rapid prototyping to titanium dental castings. , 2001, Dental materials : official publication of the Academy of Dental Materials.
[40] K. Osakada,et al. Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .