Hybrid Data Fusion DBN for Intelligent Fault Diagnosis of Vehicle Reducers

Given its importance, fault diagnosis has attracted considerable attention in the literature, and several machine learning methods have been proposed to discover the characteristics of different aspects in fault diagnosis. In this paper, we propose a Hybrid Deep Belief Network (HDBN) learning model that integrates data in different ways for intelligent fault diagnosis in motor drive systems, such as a vehicle drive system. In particular, we propose three data fusion methods: data union, data join, and data hybrid, based on detailed data fusion research. Additionally, the significance of the fusion is explained from the energy perspective of the signal. In particular, the appropriate fusion methods and data structures suitable for model training requirements can help improve the accuracy of fault diagnosis. Moreover, mixed-precision training is used as a special fusion method to further improve the performance of the model. Experiments with the datasets obtained from the simulation platform demonstrate the superiority of our proposed model over the state-of-the-art methods.

[1]  Lu Weining,et al.  Fault diagnosis method study in roller bearing based on wavelet transform and stacked auto-encoder , 2015, The 27th Chinese Control and Decision Conference (2015 CCDC).

[2]  David He,et al.  On the Use of a Single Piezoelectric Strain Sensor for Wind Turbine Planetary Gearbox Fault Diagnosis , 2015, IEEE Transactions on Industrial Electronics.

[3]  Zhe Li,et al.  Random Time Delay Effect on Out-of-Sequence Measurements , 2016, IEEE Access.

[4]  Jie Tao,et al.  Bearing Fault Diagnosis Based on Deep Belief Network and Multisensor Information Fusion , 2016 .

[5]  Laibin Zhang,et al.  A New Probabilistic Kernel Factor Analysis for Multisensory Data Fusion: Application to Tool Condition Monitoring , 2016, IEEE Transactions on Instrumentation and Measurement.

[6]  Geoffrey E. Hinton,et al.  Deep Boltzmann Machines , 2009, AISTATS.

[7]  Suxia Cui,et al.  Industrial Internet of Things , 2018 .

[8]  Fakhri Karray,et al.  Multisensor data fusion: A review of the state-of-the-art , 2013, Inf. Fusion.

[9]  Edwin Lughofer,et al.  Fault detection in multi-sensor networks based on multivariate time-series models and orthogonal transformations , 2014, Inf. Fusion.

[10]  Yanyang Zi,et al.  An unsupervised feature extraction method for nonlinear deterioration process of complex equipment under multi dimensional no-label signals , 2018 .

[11]  Bo-Suk Yang,et al.  Support vector machine in machine condition monitoring and fault diagnosis , 2007 .

[12]  Qi Liu,et al.  A deep learning-based recognition method for degradation monitoring of ball screw with multi-sensor data fusion , 2017, Microelectron. Reliab..

[13]  Wei Qiao,et al.  A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems , 2015, IEEE Transactions on Industrial Electronics.

[14]  Shun-ichi Amari,et al.  Natural Gradient Works Efficiently in Learning , 1998, Neural Computation.

[15]  Andrew D. Ball,et al.  An approach to fault diagnosis of reciprocating compressor valves using Teager-Kaiser energy operator and deep belief networks , 2014, Expert Syst. Appl..

[16]  Florian Metze,et al.  Extracting deep bottleneck features using stacked auto-encoders , 2013, 2013 IEEE International Conference on Acoustics, Speech and Signal Processing.

[17]  Qiang Miao,et al.  Time–frequency analysis based on ensemble local mean decomposition and fast kurtogram for rotating machinery fault diagnosis , 2018 .

[18]  Melinda Hodkiewicz,et al.  Classifying machinery condition using oil samples and binary logistic regression , 2015 .

[19]  Weihua Li,et al.  Multisensor Feature Fusion for Bearing Fault Diagnosis Using Sparse Autoencoder and Deep Belief Network , 2017, IEEE Transactions on Instrumentation and Measurement.

[20]  Zhipeng Feng,et al.  Planetary Gearbox Fault Diagnosis via Torsional Vibration Signal Analysis in Resonance Region , 2017 .

[21]  Shen Yin,et al.  Recursive Total Principle Component Regression Based Fault Detection and Its Application to Vehicular Cyber-Physical Systems , 2018, IEEE Transactions on Industrial Informatics.

[22]  Peng Wang,et al.  An Adaptive Multi-Sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox , 2017, Sensors.

[23]  Nishchal K. Verma,et al.  Generating feature sets for fault diagnosis using denoising stacked auto-encoder , 2016, 2016 IEEE International Conference on Prognostics and Health Management (ICPHM).

[24]  Dit-Yan Yeung,et al.  Relational Stacked Denoising Autoencoder for Tag Recommendation , 2015, AAAI.

[25]  Tao Zhang,et al.  Bearing fault diagnosis method based on stacked autoencoder and softmax regression , 2015, 2015 34th Chinese Control Conference (CCC).

[26]  Hemantha Kumar,et al.  Engine gearbox fault diagnosis using empirical mode decomposition method and Naïve Bayes algorithm , 2017, Sādhanā.

[27]  David He,et al.  On the Use of Spectral Averaging of Acoustic Emission Signals for Bearing Fault Diagnostics , 2014 .

[28]  Yaguo Lei,et al.  Condition monitoring and fault diagnosis of planetary gearboxes: A review , 2014 .

[29]  Swagatam Das,et al.  Multi-sensor data fusion using support vector machine for motor fault detection , 2012, Inf. Sci..

[30]  Guigang Zhang,et al.  Deep Learning , 2016, Int. J. Semantic Comput..

[31]  Yaguo Lei,et al.  A Method Based on Multi-Sensor Data Fusion for Fault Detection of Planetary Gearboxes , 2012, Sensors.

[32]  Robert X. Gao,et al.  Deep learning and its applications to machine health monitoring , 2019, Mechanical Systems and Signal Processing.

[33]  Yee Whye Teh,et al.  A Fast Learning Algorithm for Deep Belief Nets , 2006, Neural Computation.

[34]  Yoshua Bengio,et al.  Extracting and composing robust features with denoising autoencoders , 2008, ICML '08.

[35]  Chen Lu,et al.  Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification , 2017, Signal Process..

[36]  Yu Guo,et al.  Envelope synchronous average scheme for multi-axis gear faults detection , 2016 .

[37]  Hao Wu,et al.  Mixed Precision Training , 2017, ICLR.

[38]  Nishchal K. Verma,et al.  Intelligent condition based monitoring of rotating machines using sparse auto-encoders , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[39]  Georgios Alexandros Skrimpas,et al.  Feature Extraction Using Discrete Wavelet Transform for Gear Fault Diagnosis of Wind Turbine Gearbox , 2016 .

[40]  Sile Ma,et al.  Intelligent Fault Diagnosis for Industrial Big Data , 2018, J. Signal Process. Syst..

[41]  Yaguo Lei,et al.  Fault detection of planetary gearboxes using new diagnostic parameters , 2012 .

[42]  Norden E. Huang,et al.  Hilbert-Huang transform , 2008, Scholarpedia.

[43]  Gang Ma,et al.  Multi-feature fusion deep networks , 2016, Neurocomputing.

[44]  Yahya I. Sharaf-Eldeen,et al.  A Review of Gearbox Condition Monitoring Based on vibration Analysis Techniques Diagnostics and Prognostics , 2011 .

[45]  David He,et al.  Gearbox Tooth Cut Fault Diagnostics Using Acoustic Emission and Vibration Sensors — A Comparative Study , 2014, Sensors.

[46]  Zhao Yang Dong,et al.  Research on Unstructured Text Data Mining and Fault Classification Based on RNN-LSTM with Malfunction Inspection Report , 2017 .

[47]  Hui Zhang,et al.  Active Steering Actuator Fault Detection for an Automatically-Steered Electric Ground Vehicle , 2017, IEEE Transactions on Vehicular Technology.

[48]  Jay Lee,et al.  Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications , 2014 .

[49]  M. Liang,et al.  Intelligent bearing fault detection by enhanced energy operator , 2014, Expert Syst. Appl..

[50]  Yann LeCun,et al.  Convolutional neural networks applied to house numbers digit classification , 2012, Proceedings of the 21st International Conference on Pattern Recognition (ICPR2012).

[51]  Okyay Kaynak,et al.  Data-Driven Monitoring and Safety Control of Industrial Cyber-Physical Systems: Basics and Beyond , 2018, IEEE Access.

[52]  Evon M. O. Abu-Taieh,et al.  Comparative Study , 2020, Definitions.

[53]  Qingbo He,et al.  Energy-Fluctuated Multiscale Feature Learning With Deep ConvNet for Intelligent Spindle Bearing Fault Diagnosis , 2017, IEEE Transactions on Instrumentation and Measurement.