Development of RF-MEMS switch on PCB substrates with polyimide planarization

This paper describes an improved manufacturing technology for the fabrication of radio frequency (RF) microelectromechanical systems switches on a laminated printed circuit board (PCB). The process simplifies the fabrication process without sacrificing the RF performance of switches on the PCB. The proposed process patterns a 17.5-/spl mu/m-thick copper layer on the PCB; as a result, the surface becomes highly nonplanarized. Polyimide is then used to planarize the PCB's patterned copper layer. The use of polyimide for planarization has not only made the fabrication process simpler, but it has also reduced the formation of voids in the photoresist sacrificial layer where metallic membrane is deposited and patterned. The switches fabricated with this technology demonstrate a low insertion loss (less than 0.06 dB at 10 GHz) and good isolation (less than 20 dB at 10 GHz).

[1]  Victor M. Bright,et al.  The realization and design considerations of a flip-chip integrated MEMS tunable capacitor , 2000 .

[2]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 2. Design , 2000 .

[3]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .

[4]  R. Howe,et al.  Batch transfer of microstructures using flip-chip solder bonding , 1999 .

[5]  Songcheol Hong,et al.  A low voltage actuated micromachined microwave switch using torsion springs and leverage , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[6]  F. De Flaviis,et al.  RF MEMS switches fabricated on microwave-laminate printed circuit boards , 2003, IEEE Electron Device Letters.

[7]  Yu Liu,et al.  Low-loss distributed MEMS phase shifter , 2000 .

[9]  W. Messner,et al.  Effects of elevated temperature treatments in microstructure release procedures , 1995 .

[10]  Victor M. Bright,et al.  Fabrication, assembly, and testing of RF MEMS capacitive switches using flexible printed circuit technology , 2003 .

[11]  Gabriel M. Rebeiz,et al.  Distributed MEMS true-time delay phase shifters and wide-band switches , 1998 .

[12]  Gabriel M. Rebeiz,et al.  30 GHz tuned MEMS switches , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[13]  Gabriel M. Rebeiz,et al.  RF MEMS switches and switch circuits , 2001 .

[14]  Adele E. Schmitz,et al.  Surface-micromachined RF MEMs switches on GaAs substrates , 1999 .

[15]  A. Malczewski,et al.  RF MEMs variable capacitors for tunable filters , 1999 .

[16]  F. De Flaviis,et al.  RF MEMS capacitive switches fabricated with HDICP CVD SiN/sub x/ , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[17]  Guann-Pyng Li,et al.  Monolithic integration of RF MEMS switches with a diversity antenna on PCB substrate , 2003 .

[18]  Elliott R. Brown,et al.  RF-MEMS switches for reconfigurable integrated circuits , 1998 .

[19]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 1. Modeling , 2000 .

[20]  G.P. Li,et al.  A parametric model of MEMS capacitive switch operating at microwave frequencies , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).