Design, testing, and calibration of an integrated Mach-Zehnder-based optical read-out architecture for MEMS characterization

While testing electrical properties in microsystems is a well-developed art, the testing of mechanical properties of MEMS devices is not. There is a great need for techniques that will allow the evaluation of MEMS devices, in all stages of manufacturing, with respect to material and micromechanical properties. In this contribution we propose a new approach, based on the integrated optical read-out using a Mach-Zehnder interferometer (MZI), monolithically integrated with the piezoelectric (PZT) actuated membrane.

[1]  M. Ohkawa,et al.  Integrated optic pressure sensor on silicon substrate. , 1989, Applied optics.

[2]  Christophe Gorecki,et al.  Silicon oxynitride waveguides developed for optomechanical sensing functions , 2003, Photonics Fabrication Europe.

[3]  Wei-Ping Huang,et al.  Analysis and design of an integrated silicon ARROW Mach-Zehnder micromechanical interferometer , 1994 .

[4]  K. Worhoff,et al.  Plasma enhanced chemical vapor deposition silicon oxynitride optimized for application in integrated optics , 1999 .

[5]  K. Fischer,et al.  Integrated optics based on silicon oxynitride thin films deposited on silicon substrates for sensor applications , 1991 .

[6]  K. Benaissa,et al.  Silicon anti-resonant reflecting optical waveguides for sensor applications , 1998 .

[7]  J. Muller,et al.  Elastooptical properties of SiON layers in an integrated optical interferometer used as a pressure sensor , 1994 .

[8]  Edgar Voges,et al.  Integrated optics combined with micromechanics on silicon , 1991 .

[9]  M. Kujawińska,et al.  Evaluation of micromechanical properties of buckled SiOxNy-loaded membranes by combining the Twyman-Green interferometry with nanoindentation and point-wise deflection technique , 2004 .

[10]  Christophe Gorecki,et al.  Characterization of internal stress of silicon oxinitride thin films fabricated by plasma-enhanced chemical vapor deposition: applications in integrated optics , 2001, International Symposium on Photonics and Applications.

[11]  Krzysztof Patorski,et al.  Active microelement testing by interferometry using time-average and quasi-stroboscopic techniques , 2003, SPIE Optical Metrology.

[12]  Christophe Gorecki,et al.  Integrated optomechanical sensor for in situ characterization of MEMS: the implementing of a readout architecture , 2003, SPIE Optical Metrology.

[13]  H. Porte,et al.  Imbalanced Mach-Zehnder interferometer integrated in micromachined silicon substrate for pressure sensor , 1999 .