Electromagnetic and Thrust Characteristics of Double-sided Permanent Magnet Linear Synchronous Motor Adopting Staggering Primaries Structure

Traditionally, straggering the primaries of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) is beneficial in helping to reduce the detent force caused by the longitudinal end effect, but leading to a reduction of the average thrust. To overcome this disadvantage, this paper provides a novel DS-PMLSM, which adopts the structure of staggering two primaries and rearranging windings. First, the characteristics of the voltage and detent force are analyzed theoretically and verified by finite element (FEM) simulations. The inductance, thrust, and normal forces are then compared with the traditional DS-PMLSM. Furthermore, the geometrical parameters are optimized to improve the thrust. Finally, one DS-PMLSM prototype is tested. The detent force and back electromotive force tested results verify the effectiveness of the topology proposed in this research.

[1]  Mauro Carpita,et al.  Speed Control of a Multiphase Active Way Linear Motor Based on Back EMF Estimation , 2015, IEEE Transactions on Industrial Electronics.

[2]  Muhammad Faz Rahman,et al.  Optimal, Combined Speed, and Direct Thrust Control of Linear Permanent Magnet Synchronous Motors , 2016, IEEE Transactions on Energy Conversion.

[3]  Baoquan Kou,et al.  Reducing detent force and three-phase magnetic paths unbalance of PM linear synchronous motor using modular primary iron-core structure , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[4]  Xin Wang,et al.  Modeling of a Complementary and Modular Linear Flux-Switching Permanent Magnet Motor for Urban Rail Transit Applications , 2012, IEEE Transactions on Energy Conversion.

[5]  Liyi Li,et al.  Thrust and Thermal Characteristics of Electromagnetic Launcher Based on Permanent Magnet Linear Synchronous Motors , 2008, 2008 14th Symposium on Electromagnetic Launch Technology.

[6]  Won-jong Kim,et al.  Steady-State Modeling and Analysis of a Double-Sided Interior Permanent-Magnet Flat Linear Brushless Motor With Slot-Phase Shift and Alternate Teeth Windings , 2016, IEEE Transactions on Magnetics.

[7]  He Zhang,et al.  Analytical Methods for Minimizing Detent Force in Long-Stator PM Linear Motor Including Longitudinal End Effects , 2015, IEEE Transactions on Magnetics.

[8]  Qiang Tan,et al.  Optimization for the Pole Structure of Slot-Less Tubular Permanent Magnet Synchronous Linear Motor and Segmented Detent Force Compensation , 2016, IEEE Transactions on Applied Superconductivity.

[9]  Jun Luo,et al.  Modeling and Analysis of a Novel Transverse-Flux Flux-Reversal Linear Motor for Long-Stroke Application , 2016, IEEE Transactions on Industrial Electronics.

[10]  Mojtaba Mirsalim,et al.  Design and Analysis of a Double-Sided Linear Induction Motor for Transportation , 2015, IEEE Transactions on Magnetics.

[11]  D. Howe,et al.  Reduction of cogging force in slotless linear permanent magnet motors , 1997 .

[12]  Siliang Lu,et al.  Optimal design of permanent magnet linear synchronous motors based on Taguchi method , 2017 .

[13]  Wei Hua,et al.  Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor , 2014, IEEE Transactions on Industrial Electronics.

[14]  Won-jong Kim,et al.  Detent-Force Minimization of Double-Sided Interior Permanent-Magnet Flat Linear Brushless Motor , 2016, IEEE Transactions on Magnetics.

[15]  Bin Li,et al.  Detent Force Reduction of an Arc-Linear Permanent-Magnet Synchronous Motor by Using Compensation Windings , 2017, IEEE Transactions on Industrial Electronics.

[16]  Li Liyi,et al.  Thrust and Thermal Characteristics of Electromagnetic Launcher Based on Permanent Magnet Linear Synchronous Motors , 2008 .

[17]  Yun-Hyun Cho,et al.  Electromagnetic Normal Force Characteristics of a Permanent Magnet Linear Synchronous Motor with Double Primary Side , 2014, IEEE Transactions on Magnetics.

[18]  Nicola Bianchi,et al.  Reduction of cogging force in PM linear motors by pole-shifting , 2005 .

[19]  Kanghyun Nam,et al.  Position Estimation Using Linear Hall Sensors for Permanent Magnet Linear Motor Systems , 2016, IEEE Transactions on Industrial Electronics.

[20]  John E. Fletcher,et al.  A Linear Quadratic Regulator-Based Optimal Direct Thrust Force Control of Linear Permanent-Magnet Synchronous Motor , 2016, IEEE Transactions on Industrial Electronics.

[21]  Zahra Nasiri-Gheidari,et al.  Cogging force mitigation techniques in a modular linear permanent magnet motor , 2016 .

[22]  Jiwen Zhao,et al.  Reduction of detent force in permanent magnet linear synchronous motor with double secondary side , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[23]  Jing Zhao,et al.  Analysis and Minimization of Detent End Force in Linear Permanent Magnet Synchronous Machines , 2018, IEEE Transactions on Industrial Electronics.

[24]  Tong Zhou,et al.  Investigation of Forces and Secondary Losses in Linear Induction Motor With the Solid and Laminated Back Iron Secondary for Metro , 2017, IEEE Transactions on Industrial Electronics.

[25]  Qian Wang,et al.  Assessment of cogging-force-reduction techniques applied to fractional-slot linear permanent magnet motors equipped with non-overlapping windings , 2016 .

[26]  C. Park,et al.  Analysis on the Pitching Moment in Permanent-Magnet Linear Synchronous Motor for Linear Motion Stage Systems , 2016, IEEE Transactions on Magnetics.

[27]  W. Hua,et al.  Comparison of Complementary and Modular Linear Flux-Switching Motors With Different Mover and Stator Pole Pitch , 2013, IEEE Transactions on Magnetics.

[28]  Wei Hua,et al.  Investigation and General Design Principle of a New Series of Complementary and Modular Linear FSPM Motors , 2013, IEEE Transactions on Industrial Electronics.