Current Injection-based Simultaneous Stator Winding and PM Temperature Estimation for Dual Three-phase PMSMs

This paper proposes a current injection based simultaneous stator winding and permanent magnet (PM) temperature tracking technique for dual three-phase permanent magnet synchronous machines (PMSMs). The estimation models involving winding and PM temperature are derived for different control strategies with inductance cancellation and free voltage source inverter (VSI) nonlinearity effect. To improve the tracking performance, the Kalman filter is employed for simultaneous winding and PM temperature estimation. Compared with the existing method, the proposed simultaneous winding and PM temperature tracking strategy is independent of various operating condition which features free look-up table assistance. A laboratory dual three-phase interior permanent magnet (IPM) motor validate the proposed method under different speed and torque conditions.

[1]  F. Briz,et al.  Temperature Estimation in Inverter Fed Machines Using High Frequency Carrier Signal Injection , 2007, 2007 IEEE Industry Applications Annual Meeting.

[2]  Renato Yabiku,et al.  Use of Thermal Network on Determining the Temperature Distribution Inside Electric Motors in Steady-State and Dynamic Conditions , 2010 .

[3]  Jussi Karttunen,et al.  Decoupled d-q Model of Double-Star Interior-Permanent-Magnet Synchronous Machines , 2013, IEEE Transactions on Industrial Electronics.

[4]  Kan Liu,et al.  Current Control for Dual Three-Phase Permanent Magnet Synchronous Motors Accounting for Current Unbalance and Harmonics , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[5]  Pertti Silventoinen,et al.  Decoupled Vector Control Scheme for Dual Three-Phase Permanent Magnet Synchronous Machines , 2014, IEEE Transactions on Industrial Electronics.

[6]  Slobodan N. Vukosavic,et al.  Motor Temperature Monitoring Based on Impedance Estimation at PWM Frequencies , 2014, IEEE Transactions on Energy Conversion.

[7]  Pertti Silventoinen,et al.  Online Estimation of Double-Star IPM Machine Parameters Using RLS Algorithm , 2014, IEEE Transactions on Industrial Electronics.

[8]  Takashi Kato,et al.  Permanent-Magnet Temperature Estimation in PMSMs Using Pulsating High-Frequency Current Injection , 2015, IEEE Transactions on Industry Applications.

[9]  Takashi Kato,et al.  Comparative Analysis of BEMF and Pulsating High-Frequency Current Injection Methods for PM Temperature Estimation in PMSMs , 2017, IEEE Transactions on Power Electronics.

[10]  Fernando Briz,et al.  Rotor Temperature Estimation in Doubly-Fed Induction Machines Using Rotating High-Frequency Signal Injection , 2017, IEEE Transactions on Industry Applications.

[11]  Narayan C. Kar,et al.  Improved High-Frequency Voltage Injection Based Permanent Magnet Temperature Estimation for PMSM Condition Monitoring for EV Applications , 2018, IEEE Transactions on Vehicular Technology.

[12]  Jimi Tjong,et al.  Noninvasive Kalman Filter Based Permanent Magnet Temperature Estimation for Permanent Magnet Synchronous Machines , 2018, IEEE Transactions on Power Electronics.

[13]  Wenlong Li,et al.  Simultaneous Stator Winding and Permanent Magnet Temperature Estimation for Permanent Magnet Synchronous Machines , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[14]  Yang Guijie,et al.  Control strategy for dual three-phase PMSM based on reduced order mathematical model under fault condition due to open phases , 2018 .

[15]  Wenlong Li,et al.  Dual DC current injection‐based stator winding temperature tracking for dual three‐phase permanent magnet synchronous machine using Kalman filter , 2019, IET Electric Power Applications.

[16]  Wenlong Li,et al.  Current Injection-Based Multi-parameter Estimation for Dual Three-Phase IPMSM Considering VSI Nonlinearity , 2019, IEEE Transactions on Transportation Electrification.