Failure probabilities of SiC clad fuel during a LOCA in public acceptable simple SMR (PASS)

Abstract Structural integrity of SiC clad fuels in reference Small Modular Reactors (SMRs) (NuScale, SMART, IRIS) and a commercial pressurized water reactor (PWR) are assessed with a multi-layered SiC cladding structural analysis code. Featured with low fuel pin power and temperature, SMRs demonstrate markedly reduced incore-residence fracture probabilities below ∼10 −7 , compared to those of commercial PWRs ∼10 −6 –10 −1 . This demonstrates that SMRs can serve as a near-term deployment fit to SiC cladding with a sound management of its statistical brittle fracture. We proposed a novel SMR named Public Acceptable Simple SMR (PASS), which is featured with 14 × 14 assemblies of SiC clad fuels arranged in a square ring layout. PASS aims to rely on radiative cooling of fuel rods during a loss of coolant accident (LOCA) by fully leveraging high temperature tolerance of SiC cladding. An overarching assessment of SiC clad fuel performance in PASS was conducted with a combined methodology—(1) FRAPCON-SiC for steady-state performance analysis of PASS fuel rods, (2) computational fluid dynamics code FLUENT for radiative cooling rate of fuel rods during a LOCA, and (3) multi-layered SiC cladding structural analysis code with previously developed SiC recession correlations under steam environments for both steady-state and LOCA. The results show that PASS simultaneously maintains desirable fuel cooling rate with the sole radiation and sound structural integrity of fuel rods for over 36 days of a LOCA without water supply. The stress level of PASS fuel rods during LOCA is predominantly governed by the initial cold gap pressure; a decrease of the cold gas gap pressure is a handy design direction to assure structural safety margin for SiC cladding.

[1]  M. Ferraris,et al.  Silicon carbide composites as fusion power reactor structural materials , 2011 .

[2]  Kurt A. Terrani,et al.  Silicon Carbide Oxidation in Steam up to 2 MPa , 2014 .

[3]  James L. Smialek,et al.  SiC Recession Caused by SiO2 Scale Volatility under Combustion Conditions: I, Experimental Results and Empirical Model , 1999 .

[4]  Youho Lee,et al.  Safety of light water reactor fuel with silicon carbide cladding , 2013 .

[5]  B. Basu,et al.  Advanced Structural Ceramics , 2011 .

[6]  Zhitao Liu,et al.  Technology readiness assessment of Small Modular Reactor (SMR) designs , 2014 .

[7]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[8]  Yutai Katoh,et al.  Current status and recent research achievements in SiC/SiC composites , 2014 .

[9]  Akira Hasegawa,et al.  Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects , 2014 .

[10]  Jacob P. Dobisesky Reactor physics considerations for implementing silicon carbide cladding into a PWR environment , 2011 .

[11]  Lance Lewis Snead,et al.  Thermophysical and mechanical properties of near-stoichiometric fiber CVI SiC/SiC composites after neutron irradiation at elevated temperatures , 2010 .

[12]  M. Kazimi,et al.  THERMAL SHOCK FRACTURE OF SILICON CARBIDE AND ITS APPLICATION TO LWR FUEL CLADDING PERFORMANCE DURING REFLOOD , 2013 .

[13]  Kurt A. Terrani,et al.  Thermo-mechanical analysis of LWR SiC/SiC composite cladding , 2014 .

[14]  M. Kazimi,et al.  Characteristics of Composite Silicon Carbide Fuel Cladding after Irradiation under Simulated PWR Conditions , 2013 .

[15]  Hisashi Ninokata,et al.  A Comparative Overview of Thermal Hydraulic Characteristics of Integrated Primary System Nuclear Reactors , 2003 .

[16]  Lance Lewis Snead,et al.  High-dose neutron irradiation of Hi-Nicalon Type S silicon carbide composites. Part 2: Mechanical and physical properties , 2015 .

[17]  Steven J. Zinkle,et al.  Advanced Oxidation Resistant Iron-Based Alloys for LWR Fuel Cladding , 2014 .

[18]  Y. Katoh,et al.  Stability of SiC and its composites at high neutron fluence , 2011 .

[19]  Kurt A. Terrani,et al.  High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments , 2013 .

[20]  Hisashi Ninokata,et al.  Pioneering Role of IRIS in the Resurgence of Small Modular Reactors* , 2012 .

[21]  Reactor physics assessment of thick silicon carbide clad PWR fuels , 2013 .

[22]  Mujid S. Kazimi,et al.  A structural model for multi-layered ceramic cylinders and its application to silicon carbide cladding of light water reactor fuel , 2015 .

[23]  R. Raj,et al.  Effect of Steam Velocity on the Hydrothermal Oxidation/Volatilization of Silicon Nitride , 2006 .

[24]  M. Kazimi,et al.  Safety Assessment of SiC Cladding Oxidation under Loss-of-Coolant Accident Conditions in Light Water Reactors , 2013 .

[25]  D. Carpenter An assessment of silicon carbide as a cladding material for light water reactors , 2010 .

[26]  D. Carpenter,et al.  Assessment of innovative fuel designs for high performance light water reactors , 2006 .

[27]  Jeong Ik Lee,et al.  Feasibility study of a dedicated nuclear desalination system: Low-pressure Inherent heat sink Nuclear Desalination plant (LIND) , 2015 .