Analytical study on critical load and deformation of chip in high-pressure jet assisted machining

[1]  J. Malý,et al.  Turning of titanium alloy with PCD tool and high-pressure cooling , 2022, Journal of Manufacturing Processes.

[2]  T. Q. Bui,et al.  On invariance of spatial isogeometric Timoshenko–Ehrenfest beam formulations for static analysis , 2022, Computer Methods in Applied Mechanics and Engineering.

[3]  S. Waigaonkar,et al.  Effects of rake surface texture geometries on the performance of single-point cutting tools in hard turning of titanium alloy , 2021 .

[4]  Wagner de Rossi,et al.  State of the art of tool texturing in machining , 2021, Journal of Materials Processing Technology.

[5]  Ş. Karabulut,et al.  A review of the chip breaking methods for continuous chips in turning , 2020, Journal of Manufacturing Processes.

[6]  S. Veldhuis,et al.  Characterization and prediction of chip formation dynamics in machining austenitic stainless steel through supply of a high-pressure coolant , 2019, The International Journal of Advanced Manufacturing Technology.

[7]  F. Klocke,et al.  Increasing Productivity and Process Stability in Turning of Aerospace Materials with High Pressure Lubricoolant Supply , 2016 .

[8]  Fritz Klocke,et al.  Analytical study on the relationship between chip geometry and equivalent strain distribution on the free surface of chips in metal cutting , 2014 .

[9]  O. Çolak.  Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions , 2012 .

[10]  J. Lebrun,et al.  An experimental study of the effect of high-pressure water jet assisted turning (HPWJAT) on the surface integrity , 2011 .

[11]  Chengzu Ren,et al.  Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model , 2011 .

[12]  Fritz Klocke,et al.  Influence of a High-Pressure Lubricoolant Supply on Thermo-Mechanical Tool Load and Tool Wear Behaviour in the Turning of Aerospace Materials , 2011 .

[13]  Peter Krajnik,et al.  Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study , 2009 .

[14]  S. Palanisamy,et al.  Effects of coolant pressure on chip formation while turning Ti6Al4V alloy , 2009 .

[15]  Vishal S. Sharma,et al.  Cooling techniques for improved productivity in turning , 2009 .

[16]  B. Stok,et al.  Analytical solutions in elasto-plastic bending of beams with rectangular cross section , 2009 .

[17]  S. Paul,et al.  Some studies on high-pressure cooling in turning of Ti–6Al–4V , 2009 .

[18]  Keith Ridgway,et al.  Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems , 2008 .

[19]  R. Han,et al.  Analysis of Chip Breaking Prediction in Cutting Aluminum Alloys , 2006 .

[20]  C. K. Biswas,et al.  An analysis of strain in chip breaking using slip-line field theory with adhesion friction at chip/tool interface , 2005 .

[21]  Álisson Rocha Machado,et al.  Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies , 2005 .

[22]  Emmanuel O. Ezugwu,et al.  Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools , 2004 .

[23]  Giulio Maier,et al.  Elastic¿plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming , 2003 .

[24]  Xiaomin Deng,et al.  Finite element simulation of high-pressure water-jet assisted metal cutting , 2003 .

[25]  J. Kaminski,et al.  Temperature reduction in the cutting zone in water-jet assisted turning , 2000 .

[26]  R Crafoord,et al.  Chip control in tube turning using a high-pressure water jet , 1999 .

[27]  A. Kharkevich,et al.  Basic geometric analysis of 3-D chip forms in metal cutting.: Part 1: determining up-curl and side-curl radii , 1999 .

[28]  I. S. Jawahir,et al.  AN INVESTIGATION OF 3-D CURLED CHIP IN MACHINING-PART 2: SIMULATION AND VALIDATION USING FE TECHNIQUES , 1998 .

[29]  I. S. Jawahir,et al.  AN INVESTIGATION OF 3-D CURLED CHIP IN MACHINING-PART 1: A MECHANICS-BASED ANALYTICAL MODEL , 1998 .

[30]  Toshiyuki Obikawa,et al.  Chip breaking analysis from the viewpoint of the optimum cutting tool geometry design , 1996 .

[31]  Álisson Rocha Machado,et al.  The Effects of a High-Pressure Coolant Jet on Machining , 1994 .

[32]  M. Attia,et al.  Effect of Chip Segmentation on Machining-Induced Residual Stresses during Turning of Ti6Al4V , 2022, Procedia CIRP.

[33]  V. P. Astakhov,et al.  High-pressure supply of metalworking fluids , 2012 .

[34]  A. K. Balaji,et al.  Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 2—Assessment of Chip Forms/Chip Breakability , 2006 .

[35]  I. S. Jawahir,et al.  An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking , 1996 .

[36]  Kazuo Nakayama,et al.  Comprehensive Chip Form Classification Based on the Cutting Mechanism , 1992 .